Best Metal Cutting Hole Saw

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

KUNTEC 17 Pieces Hole Saw Kit 3/4 inches-5 inches (19-127mm) Set with Mandrels, Super Sharp Saw Blade, Install Plate and Hex Key for Sawing Holes

  • This hole saw set includes 13 most common sizes of saw blades: 3/4" (19mm), 7/8" (22mm), 1" (25mm),1-1/8" (28mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm), 2-1/8" (54mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm), 2 mandrels with nut, 1 Hex Key, 1 Install Plate.
  • Carbon Steel, Heat Treated. High strength and hardness, design for increased durability and outstanding cutting performance..
  • High precision, smooth cutting edge. Super sharp saw teeth have been designed to cut faster.
  • Hole saw is suitable for softwood, plastic board, plasterboard, thin PVC board. NOT suitable for hard metal, hardwood, density board.
  • Hole saw kit is an ideal choice for DIY projects and household maintenance and repair,great for tasks of cutting multiple hole sizes from small to large in desk surfaces, doors and furniture..
Check Stock

Bi-Metal Hole Saw Kit, 22PCS Hole Saw Set with 3/4\ to 2-1/2\ 12 PCS Saw Blades in Case, High Strength Hard Alloy Steel, Mandrels, Hex Key, Drill Bits for Metal, PVC Board, Wood, Plastic, Drywall

  • HOLE SAW SET: The entire set includes 12PCS hole saw blades, 3/4" (19mm), 7/8" (22mm), 1"(25mm), 1-1/8" (29mm), 1-1/4" (32mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/8"(54mm), 2-1/4"(57mm), 2-1/2"(64mm), 2 mandrels, 2 hex keys, 1 adapter, 1 spring, 1 extension rod and 3 drill bits for replacement, all in one storage case..
  • FAST HOLE CUTTING: Durable high speed steel Bi-metal with sharp teeth, perfect for hole cutting on metal, PVC board, wood, plastic and drywall, faster and cleaner cutting. Different hole saw sizes meet your different cutting needs..
  • DURABLE AND QUALITY: Made of high strength hard alloy steel, high hardness, wear resistance and corrosion resistance performance, much more durable and can be used for a long time..
  • GREAT DESIGN: Designed with circular arc spiral chip flute, which can remove chips in all directions. Large and small mandrels for different hole saw choice, easy to install and disassemble. In addition, our set comes with a 5.9in extension rod..
  • PORTABLE STORAGE: The set comes with a customized heavy-duty portable storage case. The well-designed groove can fix each accessory in place. Great for storage after use and convenient carry out..
Check Stock

Luomorgo 254mm/10 inch Hole Saw with Arbor 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet Blue

  • Package Contains: 1 x 10 Inch Hole Saw, 3 x Drill Bit, 1 x Hole Saw Arbor, 1 x Allen Wrench. This Hole Saw Drill Bit is designed for wood / plastic....
  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting....
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design....
  • Widely Used: Very suitable for use in corn perforated panels, drywall, wood, plastic, plaster, thin slate, acrylic panels and other home projects,....
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want....
Check Stock

MKC 6 inch Hole Saw Cutter with Big Arbor & Extra Measure Tape for Wood, PVC, MDF, Drywall, Aluminum

  • 2,Ideal for Wood, Plasterboard, PVC, MDF, Drywall, Thin Aluminum & Copper (NOT for black Metal). For home projects on air ducts, speakers, ceiling lights, etc..
  • 4, The hole saw is made of BI-metal strip with high toughness and high hardness. With the clean edge design, cutting smooth and easy..
  • 5, TIPS: When you drilling: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
Check Stock

MKC 5 inch Hole Saw Cutter with Big Arbor & Extra Measure Tape for Wood, PVC, MDF, Drywall, Aluminum

  • 2,Ideal for Wood, Plasterboard, PVC, MDF, Drywall, Thin Aluminum & Copper (NOT for black Metal). For home projects on air ducts, speakers, ceiling lights, etc..
  • 4, The hole saw is made of BI-metal strip with high toughness and high hardness. With the clean edge design, cutting smooth and easy..
  • 5, TIPS: When you drilling: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
Check Stock

Antetek 6 PCS Hole Saw Kit 1-1/4 -2-1/8 32-54mm Hole Saw Set with 4 Saw Blades 1 Mandrel and 1Hex Key for Wood Plastic PVC Plywood and Drywall

  • 【6 Pcs Hole Saw Kit:】 Antetek hole saw set covers hole saws of most common sizes for home and work demand, including 4pcs hole saws 1-1/4" (32mm),....
  • 【Premium Quality:】 The hole saw kit is made of heat-treated carbon steel, and the surface is treated with black oxidation which is durable,....
  • 【Fast and Clean Cutting:】 With the design of smooth cutting edge and sharp saw teeth to ensure cut cleaner and faster, no material gets stuck....
  • 【Multifunctional Hole Saw Kit:】 It is suitable for softwood, plastic board, plasterboard, thin PVC board, but not suitable for for hard metal,....
  • 【After-Sales Service:】 We are committed to providing every customer with satisfying products and services. If there is any problem with our....
Check Stock

ASTP&FH 2-3/4\ Hole Saw with Arbor Mandrel ,HSS Bi-Metal & Heavy Duty Steel Design, for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood(70 mm)

  • 2-3/4 inch Hole Saw made of top HSS & Bi-Metal for Heavy Dusty capability improved durability with Rust-proof. design for increased durability and outstanding cutting performance. with higher hardness , higher toughness, higher cutting strength and stronger wear resistance..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.Hole saws can cut 2.5 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Upgraded design with ultra sharp serrations,Increased wall thickness of hole saw improves durability and minimizes tooth loss,Drilling with sharper Positive Rake Tooth cuts material faster than other brand.more durable with longer life than other brand hole saws..
  • High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design,With the non-binding clean edge design,ensures smooth and clean cutting of the hole saw blade.The spring on the drill would automatically pushes the disc out of the saw immediately ....
Check Stock

4-1/4 Inch 108mm HSS Bi Metal Hole Saw Cutter with Arbor for Wood , MDF,Metal

  • This hole saw kit includes 1 of 4-1/4” (108mm) hole saw, 1 of 0.43”(11 mm) hex shank large mandrel , 1 of Ø 1/4” (6.35mm) x 3.5" (89mm) Sliver HSS pilot drill bit for wood and soft metal, 1 of Ø 1/4” (6.35mm) x 3.5" (89mm)Black HSS pilot drill bit for hard metal. Max cutting depth: 1-1/2”(38mm).
  • 二,The set includes the most popular hole saw sizes on the market to meet your different demands. Ideal for Wood, Plasterboard, PVC, Drywall, Aluminum, Sheet Metal. Special kit for DIY projects and household maintenance and repair, utilizes alignment window and taller bushings to deliver accurate height placement and straight drilling with the hole saw set...
  • Bi-metal strip is made by laser welding machine and vacuum heat treatment, providing better hardness, strength, and longer life..
  • 100% Satisfaction Guarantee: If you are not satisfied, Free return..
Check Stock

ASTP&FH 4-3/4 inch Hole Saw with Arbor Mandrel ,HSS Bi-Metal & Heavy Duty Steel Design, for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood(120mm)

  • 4-3/4 inch Hole Saw made of top HSS & Bi-Metal for Heavy Dusty capability improved durability with Rust-proof. design for increased durability and outstanding cutting performance. with higher hardness , higher toughness, higher cutting strength and stronger wear resistance..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.Hole saws can cut 2.5 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Upgraded design with ultra sharp serrations,Increased wall thickness of hole saw improves durability and minimizes tooth loss,Drilling with sharper Positive Rake Tooth cuts material faster than other brand.more durable with longer life than other brand hole saws..
  • High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design,With the non-binding clean edge design,ensures smooth and clean cutting of the hole saw blade.The spring on the drill would automatically pushes the disc out of the saw immediately ....
Check Stock