Best current Liabilities

LiitoKala Lii-600 18650 26650 21700 AA AAA Battery Charger 3A Fast Charging Touch Button LCD Display Test The Battery Capacity for Li-ion and NiMH/Cd Battery.

  • 3A Fast Charging The maximum charging current of Lii-600 is 3000mA*4 Slots. The charger will automatically allocate the charging current, if you are not satisfied, you can manually select the charging current..
  • Touch button Lii-600 adopts the design of touch buttons, and it will send out a "beep" sound feedback when touched. Responsive and easy to operate..
  • Test battery capacity Press "MODE" key to select "TEST" mode. It takes some time to test the battery capacity, please be patient..
  • Repair battery Working principle: When the charger detects that the battery is losing power, it will allocate a small current to charge the battery/stop charging and observe the battery voltage change. The battery may be repaired multiple times. note. There is no guarantee that the battery will be repaired successfully..
  • Temperature monitoring Each tank has an independent temperature detection device. When the temperature reaches 65°C (149°F), the charger will lower the charging current by two gears. If the temperature still rises, the charging current will drop to the lowest gear. (Current gear: 250mA, 500mA, 1000ma, 1500mA, 2000mA, 2500mA, 3000mA).
Check Stock

TOPUSSE Rechargeable 3.7v High Drain Flat Top Battery and Case,30A Discharge Current Lithium Batteries 2500mAh 4 Pack

  • ✅【REAL 30A DISCHARGE CURRENT】Real 30A discharge current same as original sms 25r battery..
  • ✅【REAL CAPACITY 2500mAh】Real 2500mAh capacity high drain same as original sms 25r battery..
  • ✅【APPLICATION FOR COMMON AND HIGH CURRENT ELECTRONIC DEVICES】Not only for common current electronic devives but also Compatible with various high-current ones.
  • ✅【FAST U.S. SHIPPING】Fast ship from US warehouse. Response within 24 hours..
  • ✅【DIMENSION】Flat top 65*18*18 mm(please confirm the size before purchasing).
Check Stock

bayite DC 5-120V 100A Mini Digital Current Voltage Amp Meter Ammeter Gauge with Hall Effect Sensor Transformer

  • Electrically isolated from high voltage power source which eliminates risk to delicate monitoring equipment and also minimizes safety concerns.
  • Diameter of the hole through sensor is 3/4 inch(19 mm).
  • Loop through sensor multiple times to strengthen signal. For example, if your current signal is only 0.2 Amps, you could loop the wire through the....
Check Stock

Performance Tool W83114 Scissor Fuel Line Disconnect Tool (Sizes: 5/16\ and 3/8\)

  • Easily separates quick disconnect style fittings on 5/16" and 3/8" fuel lines..
  • GM 1989 to current, Ford 1990 to current, and some Mazda models 1990 to current..
Check Stock

DC Power Supply Variable Eventek Adjustable Switching DC Regulated Bench Power Supply with 4-Digits LED Display, USB Interface, Alligator Cord/Test Lines (30V 10A)

  • 【ADVANTAGE】Novel design, strong and durable, portable handle, easy to handle. Constant voltage, constant current automatic conversion, can be uesd as a constant voltage source, can also be used as a constant current source..
  • 【PRODUCT CHARACTERISTICS】The Adjustable DC Regulated Power has plastic panel, beautiful and generous. Hand-held design, easy to carry. Voltage and current are adjusted roughly and finely to adjust voltage and current accurately..
  • 【TEMPERATURE CONTROL】Temperature control, according to the load speed adjustment, effectively reduce the noise, prolong the life of the fan. Perfect protection functions, adjustable overvoltage protection (OVP), short circuit current limiting protection (OCP), overtemperature protection (OTP), overpower protection (OPP)..
  • 【LINEAR ADJUSTMENT MODEL】PWM switch pre-voltage regulation, MOS linear adjustment mode, high effciency, energy saving and envirronmental protection, SMT process, more stable performance. The circuit design is reasonable, the key components are imported and can be used at full load for a long time..
  • 【WIDE APPLICATION】Aging test of factory products: such as DC motor, DVD, audio, resistor, capacitor and other products. Battery Charging Industry: Perfect application in batte....
Check Stock

LiitoKala Lii-500 4 Slots Smart Intelligent Battery Charger for 3.7V Li-ion/ 1.2V Ni-MH Cylindrical Rechargeable Battery LCD Display

  • 【Suitable size】Be suitable for 3.7V Li-ion & 1.2V Ni-MH cylindrical rechargeable battery of size between: (diameter: 0-22mm, height: 34-70mm).   .
  • 【Different current】Capable of charging 4 batteries of different size and with different capacity simultaneously.Each of the four battery slots monitors and charges independently.4 optional charging current: 300mA / 500mA / 700mA / 1000mA..
  • 【Current protection】LCD displays charging current, voltage, capacity, impedance and charging time.Features over current protection, over charge protection, short circuit protection, and battery polarity reverse connection protection..
  • 【Output current】Charger, fast test and normal test modes, test modes test the maximum capacity of the batteries. USB output can charge your 5V electronic devices (such as phones) when putting the Li-ion batteries in the slots.  Automatically stops charging when complete..
Check Stock

Performance Teknique ICBM-892 2 Channel Amplifier 1200W MAX

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

CR Magnetics CR4411-5 Average RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, 003e= 2K Output Load, 24 VDC +/-10%, 0-5 AAC Input Range, 0 - 10 VDC Output Range

  • CURRENT MONITORING --- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • STRAIGHT-THROUGH DESIGN --- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
  • MEASURE CURRENT RANGE --- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
  • WIDE APPLICATION --- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
  • ABS OUTER CASTING --- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
Check Stock

Current Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A

  • Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
  • The measured current of this current transmitter is AC 0-10A/20A/50A.
  • The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
  • With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
  • through‑core structure design, isolation withstand voltage up to 2000VAC.
  • hysteresis less than 1%, can be used under strong magnetic field conditions..
  • The shell is made of self-extinguishing material ABS.
  • it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check Stock

DROK Voltage Boost Converter, DC 6-30V 5V Step Up to DC 7-32V 12V 24V 5A Adjustable Volt Regulator, LCD Power Supply Module Voltage Current Amp Display Transformer Circuit Board with Case

  • Output voltage: DC 7-32V continuously adjustable (the output voltage must be at least 1.5V higher than the input voltage).
  • Output current: 5A (max), adjustable, recommended to use within 4A.
  • Output power: 60W (max), recommended to use within 50W..
  • Clear LCD Display --- The boost board is designed with a large clear digital LCD display on which shows both voltage and current value simultaneously. Which is easy to read and can help the user easily monitor the output voltage, then largely enjoy their DIY work..
  • General Application --- This voltage step up converter can be used as ordinary step-up module with over-current protection, constant current LED driver module.
  • Features --- Constant current/voltage mode.
  • Input reverse connection protection. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual [PDF]..
  • NOTE --- 1). Constant current adjustable means that CC mode only works when the actual load output current is greater than the setting one, otherwise it will work in a constant voltage state, not the current is adj....
Check Stock