Best 0 12mm Brass Wire

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

NorthPada 24 AWG 0.2 mm² Electronic Electrical Wire Kit Solid PVC Tinned Copper Single Strand Cable 2 Color 12V Spool Low Voltage 2 x 32 Feet for Current Board Lamp LED Light Car Automotive

  • Tinned copper PVC Single Strand wire kit.
  • Rated voltage: max. 300 volts (0 ~ 300 V, 3V 4.5V 9V 12V 24V 110V and other voltage less then 300V).
  • Cable length: 32 Feet/10 meters per Spool.
  • For Indoor and Outdoor, used as assorted wire, automotive wire, boat wire, car electrical wire, door bell wire, guitar wire, hobby wire,hook up wire, insulated wire, lamp/LED Light wire, low voltage wire, PCB wire and other devices.
Check Stock

35mm Piezo Transducer with Soldered Wire (Pack of 20)

  • Piezo pickup plate diameter 35mm, thickness 0.4mm, wire length 2 1/8 inch..
  • Resonant frequency 2.6 +/- 0.5 KHz, Resonant Impedance ≤250Ω, Static Capacity: 35,000±30%PF..
Check Stock

Mallory SC616NP TRANSDUCER, PIEZO, 2.9KHZ, 95DBA, 16VDC

  • Piezo pickup plate diameter 20mm, thickness 0.3mm, wire length 1 3/4 inch..
  • Resonant frequency 5.5+/-0.5 kHz, Resonant Impedance ≤300Ω, Static Capacity: 15,000±30%PF, Allowable Input Volt: 1.5-30V..
Check Stock

Alpinetech PLB12M 12mm 1/2" 120V AC LED Metal Signal Indicator Pilot Dash Light (Green)

  • Mount Hole Diameter: 0.31 inch / 8mm (drill an appropriate sized hole around 8 mm) Wire Detail:24awg, Length: 7.9inch / 20cm.
  • Led Overview: 5 Single Color each 2 pcs Total 10 pieces,Including Colour White Red Green Blue Yellow, Viewing Angle: 30 Degrees, Colored Round 5 mm Small Lens.
  • Voltage: 12 V(5V 6V 9V 12vdc for Different Brightness), Current: 20mA, Wattage: 0.24W( 0.25W ), Polarity: Anode "+" (Orange Wire) | Cathode "-" (Black Wire) leddiode.
  • Resistor: 560 Ω ohms, 1/4W 0.25W (discrepancy: ±1%), Resistor Leg Width: 0.5mm, Pre Soldered Wired with Cable.
  • Compatible with: Panelmount Dash Board Indicator,Car Lighting,Footwell,grill,Brake Light,Turn Signal Light,Boats,Architectural Lighting,DIY Hobby,Replacement Bezel Clip Holder,.
Check Stock

Brushtech 2-Inch Diameter 14-Inch Long Tube Cylinder Brush,Black

  • (Wire Diameter: 1/4", 5/16", 3/8", 1/2", 3/5'', 3/4" ) 6-Piece Brass brushes + 6-Piece Stainless Steel brushes.
  • Bristle Brush Length:80mm-120mm/3.15''-4.72''.
  • Wire Tube Brush is very flexible use, wire brush go into a small round opening like a bolt hole to remove rust etc..
  • Wire brush Ideal for tubes, cylinders or narrow clean up requirements.
Check Stock

220 Pieces French Earring Hooks Ear Wire Ball Dots in Silver with 220 Pieces Clear Earring Backs Kit for Jewelry Making Bag Gift (Gold,Sliver,Rose Gold,Bronze)

  • Anti-sensitive French earring hooks: come with 220 pieces silver French wire hooks and 220 pieces clear earring backs, enough for you to use and replace, simple but delicate, suitable for most occasions.
  • - and : made of brass without , and , French earring hooks are anti-sensitive and safe to wear, and earring backs are made of clear silicone, featuring pliable, they can help you to secure earrings.
  • Add charm and elegant: wire earring hooks are simple but will add charming and elegant in your appearance, easy to match with your suits.
  • You also can dangle small pendants to create your own styles to match different occasions.
  • Simple DIY accessories: French hook earring wires are suitable for jewelry making, ideal for wearing to office, parties, traveling, go shopping and so on, easy to make you eye-catching.
  • They are also good gifts to share with families and friends, especially people who likes DIY.
Check Stock

420pcs Non-Insulated Ring Terminals & Fork Connector Kit 22-16/16-14/12-10 Gauge Wire Lugs Battery Cable Terminals Wire Crimp Connectors High Temperature T2 Pure Non-Insulated Copper Connector

  • Ring Terminal & Fork Connector Kit Material: T2(99.9% Purity) Copper.As a wire crimp connector, it has strong conductivity and is not easy to corrode.
  • ELECALL selects 18 types of wire connector. Group by ring and fork with three suitable wire type. Model OTA-B: "A" means the wire square(mm²) that this ring terminal or fork connector can hold, "B" means the inner diameter of the ring or fork for screw..
  • Non insulated ring terminals high quality gurantee: producted under UL standard;High corrosion resistance;silver welding wire thickness: Comply with international standard,High temperature battery terminal connectors resistant heavy ring connector.Copper content ≥ 99%, conductivity ≥ 96%, high conductivity, ductility and corrosion resistance,It's a good helper for wire connection.
  • Fork Connector(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Fork Connector (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Fork Connector (AWG12-10)-0.2" -15pcs (AWG12-10)-0.25" ----- 15pcs.
  • Ring terminal(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Ring terminal (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Ring terminal....
Check Stock

OIIKI 5 PCS HT-NTC 100K Temperature Thermistor 3D Printer Parts Sensor High Temperature +260 Degrees 2 Pins Thermistor for Reprap 3D Printer MK3 Extruder Heater Block

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

CHPOWER CR-10 hotend Assembly MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W

  • This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • 100% original and high quality 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence..
Check Stock