Best 1 2 diethoxyethane

Diablo 6+2 pc SPEEDemon Spade Bit Set (6+2-Piece)

  • Optimized tip design reduces wear, minimizes breakage and prevents slippage.
  • Rust protection coating for superior wear and corrosion resistance.
  • Includes: (3) 2 in. #2 Phillips Drive Bits, (1) 2 in. #2 Square Drive Bits, (1) 2 in. #15 Torx Drive Bit, (3) 2 in. #20 Torx Drive Bits, (2) 2 in. #25 Torx Drive Bits, (1) 2 in. #30 Torx Drive Bit, (1) 2-3/8 in. Magnetic Drive Bit Holder, (1) 5/16 in. x 1-7/8 in. Magnetic Nut Setter, (1) 1/4 in. x 1-7/8 in. Magnetic Nut Setter.
Check Stock

TEKTON 1/2 Inch Drive 6-Point Impact Socket Set, 87-Piece (5/16-1-1/4 in, 8-32 mm) | SID92407

  • Includes 17-pc. 1/2 inch drive 6-point inch impact sockets: 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4 in..
  • 17-pc. 1/2 inch drive deep 6-point inch impact sockets: 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4 in..
  • 25-pc. 1/2 inch drive 6-point metric impact sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 mm.
  • 25-pc. 1/2 inch drive deep 6-point metric impact sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 mm.
  • 2-pc. 1/2 inch drive impact extensions: 3, 10 in..
  • 1-pc. impact universal joint: 1/2 in. drive.
  • Sizes are marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket openings provide an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME....
Check Stock

Fingerboard Ramp Starter Kit 1

  • Venice Manual Pad: Dimensions 9-7/8 x 5-1/2 x 1-1/4.
  • Kicker Ramp: Dimensions 5-1/2 x 3-1/2 x 1-3/8.
  • Santa Monica Rail: Dimensions 11-1/2 x 1-3/8 x 1.
  • Bench: Dimensions 11-3/4 x 1-1/2 x 1-5/8.
  • Stiffy Pad: Dimensions 9-3/4 x 2-3/8 x 1-3/4.
Check Stock

iSpring 14702 APR40 Pressure Regulator Filter Protection Valve with 1/4\ Quick Connect, 40 Psi, white

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" - 8" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as 13/16 inch..
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16"..
  • MARKING - Model: RV47L, Marking: 1/2 PSIG, Po 4" - 8". Inlet pressure 1/2 PSI. Adjustable outlet pressure 4" - 8" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-7/8” W x 2-1/4” D x 2-1/2” H. This is a small size regulator. Refer to pictures for detailed dimensions..
Check Stock

BMW Genuine LED Door Projectors 68mm Light Lamp 63312468386

  • Suitable For: 1' E81, 1' E82, 1' E87, 1' E87 LCI, 1' E88, 1' F20, 1' F20 LCI, 1' F21, 1' F21 LCI, 1' F52, 2' F22, 2' F22 LCI, 2' F23, 2' F23 LCI, 2' F45 Active Tourer, 2' F45 Active Tourer LCI, 2' F46 Gran Tourer, 2' F46 Gran Tourer LCI, 2' F87 M2, 2' F87 M2 LCI, 3' E90, 3' E90 LCI, 3' E91, 3' E91 LCI, 3' E92, 3' E92 LCI, 3' E93, 3' E93 LCI, 3' F30, 3' F30 LCI, 3' F31, 3' F31 LCI, 3' F34 GT, 3' F34 GT LCI, 3' F35, 3' F35 LCI, 3' F80 M3, 3' F80 M3 LCI, 4' F32, 4' F32 LCI, 4' F33, 4' F33 LCI, 4' F.
  • Represented by part number 1 in the diagram..
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

3 Armour Etch Over N Over Reusable Glass Etching Stencils Set | Nautical Theme | Paradise, Seashore, Under The Sea

  • Both letter stencils: narrowest letter- 1/8-inch wide, widest letter- 1/2-inch wide, all letters- 5/8-inch high.
  • Berry Floral: Upper left- 2 1/2-inch w by 2 1/2-inch h. Center left- 1 1/8-inch w by 1-inch h. Bottom left- 2 1/2-inch w by 2 7/8-inch h. Top & bottom right- 1 1/4-inch w by 1 1/4-inch h. Right centers- 3/4-inch w by 1 7/8-inch h..
Check Stock

216 Pieces Stainless Steel Self Tapping Sheet Metal Screw Assortment 34 Different Size of Oval and Pand Head for Fastening Wood Metal or Fiberglass

  • The sheet metal and machine screw kit offers 2 types of Screws for your fastening needs. Sheet metal Screws are self tapping, fully threaded and are used to fasten wood, metal or fiberglass while machine Screws fasten metal together, are fully threaded and have a blunt end..
  • Sheet Metal Screws for fastening wood, metal or fiberglass..
  • Machine Screws for fastening metal together..
  • Sturdy stainless steel construction and finish..
  • #6 x 1/2 #6 x 3/4 #6 x 1 #8 x 1/2 #8 x 3/4 #8 x 1 #8 x 1-1/4 #8 x 1-1/2 #10 x 1/2 #10 x 3/4 #10 x 1 #10 x 1-1/4 #10 x 1-1/2 #10 x 2 #12 x 3/4 #12 x 1 #12 x 1-1/2 #12 x 2.
Check Stock

Astro Pneumatic Tool 78835 Exhaust Pipe Stretcher Kit

  • Impact driven Heavy-Duty expander allows for fitting smaller exhaust piping and making exhaust seals.
  • 28mm size bolt head drives the tool and collet sets to expand pipes from 1-5/8" to 4-1/4".
  • Apply included grease to threads before use, impact wrenches rated for 800 ft-lbs tightening and above recommended to do most jobs.
  • Includes: Steel expander 1 5/8" - 2" Collet Steel expander 2" - 2 1/2" Collet 2 3/8"- 2 3/4" Collet 2 3/4" - 3 1/8" Collet 3 1/8" - 3 1/2" Collet 3 1/2" - 3 7/8" Collet 3 7/8" - 4 1/4" Collet.
Check Stock