Best 1 4 Drill Chuck

COMOWARE Hammer Drills for Concrete, 1/2 In. Corded Drill, Hammer Drill, Variable Speed 0-3000RPM, Max 48000BPM, Hammer & Drill 2-in-1 Concrete Drill, 6.5 Amp Power Hammer Drills with 10 Masonry Bits

  • POWERFUL MOTOR & PROFESSIONAL DESIGN- Equipped with powerful 750w motor, COMOWARE corded hammer drill delivers up to 48,000 bpm to quickly drill through hard materials like concrete, stone, and brick. The 6.5 amp power hammer drill is designed with 5ft extension power cable which helps for wider operating space..
  • 2-IN-1 MULTI-FUNCTION - Dual-mode selector easily converts the hammer drill from rotation-only to hammer drilling. Hammer function provides greater impact up to 48,000 bpm, allowing the masonry drill bits deliver aggressive drilling performance on brick wall and concrete. Please note that this power hammer drill is not suitable for reinforced concrete walls. Drill mode is suitable for titanium bits or cobalt drill bits drilling on wood, plastic and ceramic tile..
  • PRECISE SPEED ADJUSTMENT & SAFE OPERATION - Variable-speed trigger with rotary dial allows you to control the drilling speed at 0 - 3000 RPM according to your needs. Use the rotary dial to set the speed, then press the trigger to start the drill at the selected speed. It helps the corded hammer drill generate accurate bit starting when removing fasteners or bound bits..
  • 1/2 IN. KEYED METAL CHUCK - This concrete drill is equipped with sturdy and durable metal chuck. The 1/2 in. thr....
Check Stock

HD Chuck HEAVY DUTY 5/8' (16mm) Magnetic Drill Chuck with 3/4' Weldon Shank Adapter by BLUEROCK Tools

  • 5/8" Heavy Duty Chuck for Magnetic Drill Press.
  • 3/4" Weldon Shank adapter (The jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank).
  • Please confirm your drill is compatible with a 3/4" Weldon Shank.
  • 51mm WIDE x 86mm Long (Jaws Extended) 69mm (Jaws Receded).
Check Stock

BlueNatHxRPR SDS 1/2"/13mm Drill Chuck with Quick Change Drive and Wrench to Drill

  • Production Name: 1/2" Drill Chuck for Impact Driver(1.5-13MM),Fits Bit: 1/16" - 1/2"(1.5-13mm),Suit for: Standard Impact Driver.
  • Very Convient: With installed 1/2" Drive by SDS adapter, very easily transform power impact wrench to a drill,save your time and energy.
  • Durable: With high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating,it is very durable.
  • Widely used for heavy duty drill work as to hard material such as drill hole on wall or stone.
  • Include: 1 drill chuck with adapter, 1 drill lock key.
Check Stock

NEIKO 30275A Impact Wrench Adapter | 1/2 Drive Female to 1/4 Hex Converter | Quick Release | Quick Change Chuck | Square to Hex Bit Adapter| Impact Rated Cr-Mo Steel for Ratchet Wrenches Drivers

  • CONVERSION: Each hex to square to hex adapter /converter has duo ends. Female 1/2 inch adapter on one end and a 1/4 inch female hex-adapter on other....
  • PREMIUM QUALITY: Each impact to hex chuck adapter is made with a heavy-duty chrome molybdenum steel construction for durability and allows for the....
  • MULTI-FUNCTIONING: This impact chuck adapter converts any air or power impact wrench into a drill or ratcheting wrench into a driver or impact....
  • QUICK-CHANGE: The 1/2” drive quick-release mechanism in the chuck allows for easy, one-handed swapping between impact driver bits while working.....
  • 1/4” FIT: This impact hex adapter securely holds any standard screwdriver bits in a 1/4" hex-shank bit (including insert drill bits) to eliminate....
Check Stock

LaBear Drill Chuck Keyless Mini 3-Jaw Adapter with Quick-change 1/4\ Hex Shank to Hold 1.5-6mm Alloy Black Drill Bits Milling Cutters

  • 【Chuck Adapter】Turns any ¼” cordless power screwdriver into a drill or grinder to quickly switch tasks and keep the job moving.
  • 【Specifications】- 1/4 inch ( 6.35 mm ) Hex shank, 3-Jaw Drill Chuck Adapter.
  • 【How to Use】- Keyless chuck converter easy ON and OFF for driving to drilling in seconds..
Check Stock

Garden Auger Drill Adapter, SDS Plus to 1/2-Inch(M13 x 15mm) Thread Keyless Drill Chuck Adapter Round Shank for Impact Driver,Drive Hammer Drill

  • Compatibility: Fit 10mm dia round shank to 1/2" thread adapter for drill chuck..
  • Material: Garden Auger Power Drill Adapter is made of durable steel with 4 flats on the 0.36 inch shank to match up with the chuck teeth on your hammer drill..
  • Note: If the adapter need to work with a thread locker when there for a reverse motion, you can always use a thread locker on the screw holding the two pieces together to resolve this problem..
  • Size: Overall Length: 4.1 inches, Body Diameter: 0.77 inch..
  • Application: Adaptor connects drill to Earth Augers..
Check Stock

PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2 2MT

  • Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
  • This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • The #2MT Arbor accepts 1/4" x 20tpi draw bolt.
  • Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
Check Stock

Auger Power Drill Adapter, 4.1Inch Length Thread Keyless Drill Chuck Adapter Round Shank for Impact Driver (Type A)

  • ★Good Design: It with 2 flats on the 0.31 inch shank to match up with the chuck teeth on your cordless drill..
  • ★Compatibility: Fit 10mm dia round shank to 1/2" thread adapter for drill chuck..
  • ★Size Overall Length: 4.1 inches, Body Diameter: 0.77 inch..
  • ★Premium Material: The is made of durable steel, it provides a longer life, sturdy and durable..
  • ★Application: The adaptor connects drill to Earth Augers..
Check Stock

Flexible Drill Bit Extension Set, Includes 105° Right Angle Drill, Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, 3pcs Drill Bit Holder, Screwdriver Bit Kit

  • 【Complete Collocation】Package included 1pcs bendable drill bit extension, 1pcs 105° right angle drill extension, 3pcs 1/4 3/8 1/2" universal socket adapter set, 3pcs Drill Bit Holders, 10pcs screwdriver bit set. These extension kit work great, when you have limited access..
  • 【1/4" 105° Right Angle Drill Attachment】105° Angle 1/4 inch Hex Drill Bit Screwdriver Socket Holder Adaptor,which is quick change compatible and fits most power drill, rechargeable drill, manual wrench and driver chucks..
  • 【Impact Driver Bit Set】1/4 Hex Shank Socket Adapter Impact Set Square Nut Driver Drill Bit 1/4" 3/8" 1/2" ,connect to the standard hex nut drivers, impact hole saws, spade bits and more..
  • 【Drill Bit Holders】1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • 【Flexible Shaft Drill Bit Extension】Length: 29cm/11.42" (Approx.).
  • Features: for Electronic Drill, Connecting Link, Flexible..
Check Stock

jar-owl Powerful Brushless Motor 21V Cordless Drill Set, 319 in-lb Torque, 0-1350RMP Variable Speed, 10MM 3/8'' Keyless Chuck, 25+1 Clutch, 1.5Ah Li-Ion Battery & Charger for Home Tool Kit

  • ‍Practical Father's Day Gifts ‍- 21V Cordless Drill Set! ❤3 Year Warranty❤.
  • ✍️【Tips】 Rotating the black chuck in front of the machine makes the chuck jaws come out for changing bits..
  • Brushless Motor 36N.mCompared with the brushed motor, the life of the Brushless Drill Driver increases 10 times and the operating time increases by 50%. 25 + 1 Clutch, 2 Speed Shift & 319In-lb Torque,Equipped with 2 in 1 working mode-drive and drilling, 21V drilling / driver is your good partner for work. 25 adjustable clutch settings with variable pressure trigger (2 speed: 0-350RPM, 0-1350RPM) help to accurately complete various applications..
  • Copper Motor, 3/8Metal Chuck & Forward/Reserve ControlFeatures a Copper Motor, the drill can provide stable operations and is much lighter, cooler than aluminum motor drill drivers,The power drill tool kit is pretty easy and straightforward to use. The adjustable metal chuck can be inserted into a drill or screwdriver with a diameter of up to 3/8 "(10mm) and has excellent accessory compatibility. The forward / backward switch allows you to tighten or replace / remove the dr....
Check Stock