WORKPRO Laminate Wood Flooring Installation Kit with Reinforced Double-Faced Mallet Heavy Duty Pull Bar Tapping Block and 30-Piece Spacers Included
✅Reinforced Mallet: Constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS. The double-faced solid PVC head delivers a softened, positive strike. The mallet head is 1-3/8 inch in diameter. The handle is made of American hickory which is lightweight but tough. The whole mallet is 10-3/4 inch long and weighs 1.036lb..
✅Enhanced Pull Bar: Made from premium A3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. The soft pads on the back can well protect the floor from scratch..
✅Solid Tapping Block: The tapping block made from polypropylene is designed solid, which is more sturdy and durable. The approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch..
✅30-Piece Spacers: The kit comes with 30 pieces plastic spacers which are designed with non-slip slots. The approximate size of the spacer 2-3/8 x 1-1/8 inch..
✅The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. You are always welcomed to contact us for warranty service whenever there is any problem with the product..
Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.
Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
ABN Adjustable Pry Bar Set Heavy Duty 11-Point Indexing Pry Bar Set Automotive Pry Bar 3pc Kit – 8in, 12in, 16in
Adjustable prybar tool set meets or exceeds ANSI specifications.
GRIP COMFORTABLY: Ergonomic thermoplastic rubber (TPR) handle on each auto pry bar allows for maximum grip and leverage with less user fatigue and more productivity.
EASY STORAGE: Heavy-duty 17.5” x 2.4” x 8.2” inch (44.5cm x 6.1cm x 20.8cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
PACKAGE CONTENTS: Pry bars heavy duty flat bar tool kit includes (3) adjustable and indexable angle pry bars (8”, 12”, 16” inch) and (1) carrying case.
Varied handle lengths allow for perfect reach and leverage for the space you are working in.
12 and 16 inch bars have 2.5” x 0.6” x 0.7” inch (64mm x 14mm x 18mm) head and 4.3” x 1” inch (109mm x 25mm) handles while the 8 inch bar has 1.5” x 0.5” x 0.6” inch (38mm x 13mm x 15mm) head and 3.6” x 0.9” inch (91mm x 23mm) handle.
ABN Torque Multiplier Wrench – Torque Multiplier 1 Inch Drive Lug Nut Wrench Torque Amplifier Lug Nut Remover
DURABLE TORQUE MULTIPLIER: Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
EASY TO USE: Remove lug nut caps and place correct socket on to the lug nut.
Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
Attach the handle and turn in the direction you wish to move the nut.
3 inch (75mm) extension bar helps to remove nuts quickly after being loosened.
Use the square socket for square duel lug studs.
PERFECT SIZE FOR YOUR NEEDS: Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
This labor saving wrench set fits your other 1 inch drive sockets.
Silicone Lollipop Gummy Brownies Hard Candy Edible leaf Mold Ice Cube Chocolate Soap Candle Tray Party maker (Brown (Mj_Smiley_Bar))
Verify Value Pack – Three silicone molds in one package for edible gummies.
Leaf, Happy Face and Break-apart Bar. Our Shaped and Happy Face Molds are Microwave, Oven, Refrigerator, Freezer and Dishwasher Safe. These molds Supports temperature from Oven to freezer (-40 to 440 Fahrenheit)..
DIY Treats - The leaf, Happy Face and Break-Apart Bar molds can be used in many varieties from edible, candy mold, Cake topper, gummies, chocolate mold, ice cube tray, cake decorating, hard candy to much more. No matter baking or freezing, our molds can withstand it..
Mold - leaf shaped mold measures 7.1 x 4.0 x 0.43 inches. Each Leaf has 6 Small Cavity and 6 Larger Cavity.
Small cavity measures 0.75 x 0.9 inch and 0.42 inch deep and larger cavity measures 1.65 x 1.35 inch and 0.42 inch deep..
Break-Apart Bar Mold - Break-Apart Bar silicone Mold measures 8.5 x 4.2 inches and 0.3 inch deep.
With 24 break-apart thin bars. Each break-apart bars measure 1” x 0.65” and 0.3 inch deep..
Happy Face Mold – Happy Smiley Face silicone Mold measures 8.2 x 4.2 inches and 0.5 inch deep.
With 15 Happy Smiley Face. Each Smiley Face measure 1.1 inch in diameter and 0.5 inch deep..
12'' Rise 1-1/4'' Batwing Ape Hanger HandleBar Fit Harley Sportster XL Softail FLST FXST Gloss Black
Fitments: Harley Dyna Softail Sportster XL 883 1200, Road Glide 1998-2013 & 1994-2023 Road King Model 1994-2020 (Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide, Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers)..
Gloss Black Material: Copper+Nickle+Power Coated Black,High Standard Rust-Proof plating.
Steel Pipe,much stronger than other Straight Seam Welded pipe..
Handle Bar Specifications: The handlebar end rise12'', Bar Diamete:1-1/4 inch,Clamp Area Width: 5.37 inch & Diameter: 1 inch.
Center Width: 10-1/2 inch, Grip Area Bar Diameter: 1 inch.Overall Width: 33 inch. Pullback/Sweep: 8 inch.
Easy Install: The Monkey Bagger Bar model with wiring holes, with Pre-Drilled, easy installation, it gives a wonderful driving experience..
Package include: 1x 12'' gloss black Ape Hangers Handlebar..
