【HIGH QUALITY MATERIAL】Made of high quality stainless steel, which offers good corrosion resistance, they also have superior rust resistance and the excellent of oxidation resistance. High hardness for long time service, the hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
【ELASTIC DESIGN】Deep thread, not easy to slick, because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength.
【ANTI-LOOSE】The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device, used for frequent disassembly, it can greatly improve the life of thread.
【7 SiZE ASSORTED HELICOIL KIT】The kit contains 7 kinds of size: M3(10pcs), M4(10pcs), M5(10pcs), M6(10pcs), M8(10pcs), M10(5pcs), M12(5pcs). Totally 60 piece. Package into a plastic grids case and each size sorted a grid separately, widely used in daily life,mainly used in various low strength mate....
8Pcs Screw Extractor Set, Easy Out Damaged Screw Extractor Kit, Bolt Water Pipe Remover Set, with Storage Case.
8 piece Screw Extractor -can Easy Out Damaged Bolt Extractor Kit Stripped Broken Screw Remover Set, different sizes of screw extractor to meet different needs..
Screw Extractor Kit Made from carbon steel and are tempered twice for extra hardness and durability. Screw Extractor Works on wood and machine screws, as well as flat, hex, or painted over screws..
Remove Damaged Screws Bolts And Water Pipes – These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes..
Screw Extractor can remove some of the common screwdriver can not be disassembled, damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings..
Screw extractor size includes #1 for 1/8″-5/32″ , #2 for 5/32″-3/16″, #3 for 3/16″-1/4″, #4 for 1/4″-5/16″, #5 for 5/16″-7/16″, #6 for 7/16″-9/16″, 7# for9/16″-3/4″, 8# for 3/4″-1″..
156 Pieces Rubber End Caps Rubber Caps for Screws Rubber Caps for Bolts Rubber Screw Covers Bolt Caps Vinyl Caps Rubber Screw Caps in 9 Sizes from 2/25 to 4/5 Inch (Black)
...need to cut the protective cover to the proper length, then open the opening of it, finally adjust the protective cover to the appropriate position, which is very convenient to use and can serve you well.
Wide application: this rubber cap protector is suitable for fence railings, forged iron cover, bolt replacement, screw or nut safety, which can cover any scratches or burrs that may occur during the cutting process.
In addition, it can provide protection against injury by pointed rod and tubing edges.
AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)
...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
ISO9001 certified for strength and durability.
ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
Install the base plate on a stable concrete slab under the area you wish to support.
Use the mounting holes on top and bottom plates to bolt jack to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
Always grease threads before use (grease not included).
10Pcs Screw Extractor and Left Hand Drill Bits Set, Bolt Remover Reverse Cobalt HSS Steel Drill Bit for Remove Stripped Screws and Broken Bolts
Save Time and Effort: Broken bolt extractor kit are used to remove stuck, broken or screwed tools. The stripping bolt remover and extractor easily removes damaged screws, studs, bolts and other accessories..
Unique Design: ez out bolt extractor set is designed with a 135°angle, which makes it easier to cut into the workpiece and has less axial resistance. This design can not only increase the working length of the cutting edge, but also reduce the thickness of the cutting layer, which making the cutting effect better and without damaging other working areas..
Multi-Purpose: Simple drill extractor is multipurpose on your life. Bolt extractors that remove broken screws, whether working on wood or metal, are ideal for construction, automotive, home DIY projects or for industrial use.These extractors are excellent if you are working in a production environment and using screw head bolts..
High and Durable Material: The left hand drills are made from cobalt fortified HSS material, which increases durability and service life.This screw extractor has strong wear resistance and clear chip removal. HSS is harder, tougher and easier....
Stalye Nut and Bolt Thread Checker – High Speed Steel Thread Checker Standard and Metric – Complete SAE Male Female Gauge – Accurate Measurements
... excellent choice for construction, engineering, technical schools and more!.
【Heavy Duty Construction】: This standard and metric thread gauge is made using premium quality high speed steel, a rustproof material which doesn’t bend or break, designed to withstand the test of time..
【Wire Loop Assembly】: This screw size and thread gauge features a smart wire loop design which makes it easy to store or hang, at the same time preventing losing the smaller pieces..
【Engraved Measurements】: Say goodbye to the hassle and guesswork that consumes your time, with the Stalye thread gauge SAE and metric, featuring permanently engraved thread sizes for easy and accurate identification..
SBDs (Pack of 10): 1/2\- 9/16\ Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 0.5 Inch Pipe Post Tubing Rod OD Protective Cover. (10, 1\ Inside Height)
SBDs (Pack of 10): 1/2"- 9/16" Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 0.5 Inch Pipe Post Tubing Rod OD Cover - 1" inside Height..
These caps are for a tube/thread with OD 1/2" only. These are strechable by 1/16" without tearing off.Please check the Out Side (OD) Diameter of the pipe / Screw you are using for to match the ID 1/2" of the plug listed. These caps have 1/2" Inside Diameter and are suitable for screws / pipes with 1/2" Out Side Diameter..
These caps are manufactured by ISO 9001 certified molding company "CAP0LUGS. USA YOU CAN TURST FOR THE QUALITY AND ACCURACY IN PRODUCTG MEASUREMENTS..
