Best 10mm Hollow Bolt

E-outstanding 6pcs Galvanized Carbon Steel Expansion Bolt Toggle Bolt and Wing Nut 1/8\ x 2\ for Precast Slab Hollow Brick

Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M12x80mm 4pcs

  • Package Content: 2 x Car Repair Expansion Bolt.
  • Thread Size: M10 x 30mm/0.4" x 1.2"(D*L).
  • Flat Washer Size: 20 x 2mm/0.8" x 0.08"(D*T).
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M8x100mm 6pcs

  • Package Content: 4pcs x Car Repair Expansion Bolt.
  • Thread Size: M10 x 40mm/0.4" x 1.6"(D*L).
  • Flat Washer Size: 22 x 2mm/0.87" x 0.08"(D*T).
Check Stock

uxcell 12Pcs 12mm x 60mm Plastic Expand Expansion Nails Wall Expandable Tube Connector Screws Bolts

  • With elastic wings for fixing and distributing the weight of the fixed object to a larger area.
  • Can be used for hollow brick, gypsum board, cement fiberboard, board, etc.
  • The installation is simple and quick with a common screwdriver.
  • Made of high quality galvanized carbon steel, rust proof, corrosion resistant, uniform coating, strong adhesion and long service life. It is suitable for the installation of lamps, curtains, photo frames, coat racks, power switches, etc.
Check Stock

Wake MTB Stem 31.8 110mm 60 Degree Adjustable Bike Stem Mountain Bike Stem Short Handlebar Stem for Most Bicycle, Road Bike, MTB, BMX, Fixie Gear, Cycling (Alloy, Lightweight, Black)

  • Stereer Tube diameter: 28.6mm (1-1/8"), Handlebar Diameter: 31.8mm (1-1/4"), Length: 110mm, Weight: 290g, Degree: 0-60° Adjustable.
  • Four bolt bar clamp holds bar securely in position..
  • Easy installation, just connect up the original front fork stem..
  • Universal short handle bar stem suitable for most road bike, fixed gear bicycle, mountain bikes, etc.
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

Bonost 48 Pcs Toggle Bolts - 1/4 3/16 1/8 Inch Butterfly Toggle Anchors for Drywall - Toggle Bolt Assortment Kit with Matching Wing Nuts Hex Nuts Washers

  • 【What You Get】: 48pcs toggle bolts and wing nut kit, including 1/4-inch: 12pcs, 3/16-inch: 16pcs, 1/8-inch: 20pcs. We also provide matching hex nuts and washers, making it easier for you to hang mirrors or pictures..
  • 【High-quality Material】: Made of premium carbon steel, these toggle bolts for drywall are corrosion resistant, durable enough to meet different occasions. Zinc coatings make the toggle bolts have a longer service time..
  • 【Easy to Install】: 1. Drill a hole required for installation.
  • 3. Place wing unit on toggle bolt. Thread the bolt to a depth of about four or five threads.
  • 4. Install your toggle bolt and then tighten the fastener clockwise..
  • 【Wide Applications】: Butterfly anchors for drywall have spring-loaded wings that open inside the hollow wall, dispersing the weight of the secured item over a larger area. Widely used in hollow block, gypsum wallboard and more..
  • 【Durable & Sturdy Case】: Comes with no-mix compartments and carrying handle, the case is easy to carry and store toggle anchors. Made of durable construction and heavy duty material, the case offers long-lasting usage..
Check Stock

MEISCHE Upgraded 50mm Stem Mountain Bike, CNC MTB Short Stem Red 31.8 or 35mm Bars Riser, 3D Forged Enduro MTB Bar Clamp

  • Enduro Stem is made of 3D Forged high strength 6061 T6 VioGi Aluminum Alloy, heat treated and CNC hollow.Light weight: around 150g..
  • Angle: 0 Degree, handlebar diameter is 31.8mm(1.25”) or 35mm(1.38”),front fork stem diameter 28.6mm(1-1/8”),Length:50mm(Center distance of the two holes)..
  • Discipline: XC AM Enduro DH,the burly 31.8 bar clamp zone is chamfered to reduce stress and increase fatigue life in handlebars..
  • Super-short only 50mm length, with an minimal stack height, the Enduro Stem brings style and confidence to riders..
  • Easy installation, just connect up the original front fork stem. Four bolt bar clamp holds bar securely in position.It’s a great mountain bike stem for downhill, enduro, trail and XC riders..
Check Stock

MEISCHE Upgraded 50mm Stem Mountain Bike, CNC MTB Short Stem Black 31.8 or 35mm Bars Riser, 3D Forged Enduro MTB Bar Clamp

  • Enduro Stem is made of 3D Forged high strength 6061 T6 VioGi Aluminum Alloy, heat treated and CNC hollow.Light weight: around 150g..
  • Angle: 0 Degree, handlebar diameter is 31.8mm(1.25”) or 35mm(1.38”),front fork stem diameter 28.6mm(1-1/8”),Length:50mm(Center distance of the two holes)..
  • Discipline: XC AM Enduro DH,the burly 31.8 bar clamp zone is chamfered to reduce stress and increase fatigue life in handlebars..
  • Super-short only 50mm length, with an minimal stack height, the Enduro Stem brings style and confidence to riders..
  • Easy installation, just connect up the original front fork stem. Four bolt bar clamp holds bar securely in position.It’s a great mountain bike stem for downhill, enduro, trail and XC riders..
Check Stock