Best 13kg Servo

Yahboom Digital Servo Full Metal Gear High Torque Servo Motor for RC Model DIY Waterproof Control Angle 180° DS3218MG 20kg servo

  • Super Large Torque - Maximum torque of servo is 6.0V up to 24 kg f / cm，Very strong, excellent range of motion, and includes a metal horn..
  • Excellent Quality - DS3218MG Servo Motor not only has gears undergoing hard oxidation treatment, but also has an aluminum alloy case with good heat....
  • High Precision - Metal servo using dual ball bearings design and advanced potentiometer to make sure the high linearity and accuracy of the servo.
  • Standard Size Wide Range of Applications - 1.58x0.79x1.60inch (40x20x40.5mm), Weight: 2.4oz（68.2g）Perfect for most RC cars, robot joints, 1 / 8 RC....
  • Professional After-sales Guidance - Yahboom provides excellent after-sales service. If you have any product problems, you can contact Yahboom for help.
Check Stock

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

PINGPING Channel 2 rc Radio 2CH RC Micro Mini Aircraft  Control Remote Helicopter Helicopter The Mad Womens Ball Red One Size

  • 100% new brand, high-quality SG90 servo motor, compatible with remote control helicopters, micro robots, robotic arms and ships. Support various....
  • None Load operating speed：0.12 seconds/60 degrees (4.8V).
  • Using temperature: -30~+60 degrees Celsius.
  • Dead zone setting: 4 microseconds Working voltage: 3.5V~6V.
Check Stock

CYS 36g/3.9kg/ .16sec Standard Servo S3003 2X bearing

  • CYS 36g/3.9kg/ .16sec Standard Servo S3003 2X bearing.
  • 0.12 sec/60° @ 6V Torque: 3.9kg-cm @ 4.8V.
  • 3.3kg-cm @ 6V Weight: 36g / 0.94oz Power Supply: 4.8V/ 6V Connector type: JR/Futaba compatible It will work with Futaba J, Hitec S, JR, and Airtronics-Z radio systems..
Check Stock

5pcs K-Power 3.7g / 4.3g Plastic Gear Micro Mini Servo for rc Airplane car DIY arduino Robot (4.3g Micro servo)

  • [4.3g Micro servo,Super light-weigh] 100% Brand New and Sub-Micro Airplane Servo 4.3g.Dimension:20.8*8.2*19.3mm / 0.8*0.3*0.8in.
  • [Strict production and quality control] of plastic components ensure happy and safety use.
  • [Coreless Motor] Provides high speed, incredible efficiency, and low power consumption.Torque:0.8kg-cm/4.8V.
  • [Analog circuit design for high precision and high efficiency] Fine workmanship,good performance and easy to install..
  • [Application] Suitable for use in RC Airplane and Fixed Wing Glider.
Check Stock

Servo SG90，Micro Steering Gear Motor kit Suitable for Remote Control Robot Helicopter Airplane Control car Ship (90 Degrees to 180 Degrees (Universal))

  • 100% new brand, high-quality SG90 servo motor, compatible with remote control helicopters, micro robots, robotic arms and ships. Support various remote control toys.
  • None Load operating speed：0.12 seconds/60 degrees (4.8V).
  • Using temperature: -30~+60 degrees Celsius.
  • Dead zone setting: 4 microseconds Working voltage: 3.5V~6V.
Check Stock

Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm

  • Traxxas 59076-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Red.
  • Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Di....
Check Stock

Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran

  • Traxxas 59073-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Blue.
  • Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body D....
Check Stock

4 X DS3218 Waterproof Digital Servo with 25T Servo Arm, High Torque 20KG Full Metal Gear DS Servo for 1/8 1/10 1/12 DIY RC Toys Model TRX 4 RC Crawler Boat Truck (Control Angel 270°)

  • ✨ Upgraded Version - Advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof..
  • ✨ Large Torque - Maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V.
  • Stall Torque (5V): 19 kg/cm (263.8oz/in)..
  • ✨ High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell..
  • ✨ Well-controlled, 270 degree rotation. Perfect for 1/8, 1/10, 1/12 Scale Crawler Truck, RC Car,robot,Boat,mechanical arms, climbing cars and remote control models..
  • ✨ 4 X DS3218MG Digital Servo, 4 X 25T Servo Arm. 4X Accessories. Any problem please contact us feel free..
Check Stock

ANNIMOS 20KG RC Servo Digital High Torque Full Metal Gear Waterproof,180° Control Angle

  • ✔High-precision digital servo upgraded version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
  • ✔Durable - equipped with strong copper & aluminum gears, CNC aluminium middle Shell,to ensure long service life.
  • ✔Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V,with 25T Adjustable metal servo arm.
  • ✔High Rotation - well-controlled,180 degree rotation.
  • 360 degree rotation when power-off, perfect for robot joint activities.
  • ✔Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm).
Check Stock