Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm
Traxxas 59076-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Red.
Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Di....
Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran
Traxxas 59073-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Blue.
Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body D....
Yahboom Digital Servo Full Metal Gear High Torque Servo Motor for RC Model DIY Waterproof Control Angle 180° DS3218MG 20kg servo
Super Large Torque - Maximum torque of servo is 6.0V up to 24 kg f / cm，Very strong, excellent range of motion, and includes a metal horn..
Excellent Quality - DS3218MG Servo Motor not only has gears undergoing hard oxidation treatment, but also has an aluminum alloy case with good heat....
High Precision - Metal servo using dual ball bearings design and advanced potentiometer to make sure the high linearity and accuracy of the servo.
Standard Size Wide Range of Applications - 1.58x0.79x1.60inch (40x20x40.5mm), Weight: 2.4oz（68.2g）Perfect for most RC cars, robot joints, 1 / 8 RC....
Professional After-sales Guidance - Yahboom provides excellent after-sales service. If you have any product problems, you can contact Yahboom for help.
WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)
25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
TecUnite 20 Pieces 3-Pin Extension Cable Cord Female to Male Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(4 Sizes)
Servo extension cord sizes: have 4 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch and 50 cm/ 19.7 inch, each length has 5 pieces servo extension cords.
Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
Package includes: 20 pieces of female to male servo extension cable wires with 4 different lengths, enough for you to use on different occasions.
CYS 36g/3.9kg/ .16sec Standard Servo S3003 2X bearing
CYS 36g/3.9kg/ .16sec Standard Servo S3003 2X bearing.
0.12 sec/60° @ 6V Torque: 3.9kg-cm @ 4.8V.
3.3kg-cm @ 6V Weight: 36g / 0.94oz Power Supply: 4.8V/ 6V Connector type: JR/Futaba compatible It will work with Futaba J, Hitec S, JR, and Airtronics-Z radio systems..
LAFEINA Aluminum Alloy 25T Adjustable Damping Servo Arm for 1/10 RC Crawler Car Traxxas TRX4 TRX6 Upgrade Parts (Titanium)
25 Teeth Spline Steering Arm is CNC machined, and Spline Steering Arm Server Rocker makes it precise in size and stable in performance..
25 Teeth Spline Steering Arm is compatible with Futaba Savox Emax HSP Power HD Xcore & Other popular prand servos motor, and 25T Servo Horn does not fit for Hitec and JR Servos..
25 Teeth Spline Steering Arm is a great replacement part, and 25T Servo Horn fits for 1/8 1/10 RC Car Crawler..
25 Teeth Spline Steering Arm includes a distance from hole center to hole center: 15mm, 18mm, and 25T Servo Horn 25 Teeth Spline Steering Arm is made of Aluminum alloy, strong and durable..
Package of 25 Teeth Spline Steering Arm includes: 1 x 25T Metal Servo Arm, Red, Spline Steering Arm Server Rocker, 25T Servo Horn 1 x 25T Metal Servo Arm, Black, 25T Servo Horn, 25T Servo Horn 25 Teeth Spline Steering Arm.
Tecunite 20 Pieces 3-pin Servo Extension Cable Wire Cord Female to Male RC Servo Extension Cord Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(5 Sizes)
Servo extension cord sizes: have 5 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 4 pieces servo extension cords.
Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
Package includes: 20 pieces of female to male servo extension cable wires with 5 different lengths, enough for you to use on different occasions.
