Best 16 Ton Lifting Capacity

Floor Jack,2 Ton Heavy Duty car jack,Lifting Range 5-1/8" to 13",Hydraulic Low Profile Trolley Service Floor Jack,4,000 lb Capacity,Blue(AA051)

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

Cat 4 Ton All-in-One Truck Jack, Bottle Jack and Stand in One, Car Lift Equipment for Repair - 240342

  • INNOVATIVE DESIGN: All in one truck jack is just a portable jack designed to not only lift but safely hold higher vehicles like trucks, SUVs, or offroad vehicles.
  • eliminates the need for extra jack stands.
  • will lift and hold both body on frame and unibody vehicles.
  • PATENTED: The genius of this jack's design is it allows both easy and safe lifting of higher vehicles while making holding them trouble free as well.
  • the auto safety lock and riser retaining pin hold vehicle at height, eliminates the need for additional jack stands.
  • LIFT RANGE: Jack has a lift range from 11 inches to 21 inches.
  • CAPACITY: Jack has a 4 ton (8,000 lbs) lifting and holding capacity.
  • TRUSTED BRAND: If you are a fan of the big yellow and black machines, you will love the Cat branded 4 Ton All-in-One Truck Jack.
Check Stock

AFF Heavy Duty 10 Ton Air Lift, 200-PSI, 12' Lift Travel, Diameter Rubber Tread Wheels, 3400A

  • Lift: Designed for lifting or lowering the entire front/rear of a vehicle, this model includes a heavy duty air valve that offers accurate lift control with a 12" lift travel.
  • Capacity: This model has a 10 ton capacity achieved at 200 PSI.
  • An air valve provides speed control when lifting or lowering a load.
  • Features: The removable “T” handle allows for easy storage with extension tubes that offer multiple lifting points and locking positions.
  • Large diameter rubber tread wheels allow for easy maneuverability and portability.
Check Stock

Torin T83006W Blackjack Hydraulic Trolley Service/Floor Jack (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Black

  • Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster.
  • Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-11/16" and a maximum height of 20-7/8".
  • Ideal for most cars, trucks, vans, and SUVs.
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Single piston quick lift pump allows you to easily raise the jack to the desired height.
  • Safety bypass system prevents over-loading and ensures safe operation.
  • 360-degree rotational handle allows for easier access and better angles for lifting.
  • Includes a limited 1 year manufacturer warranty.
Check Stock

Stark USA 2 Ton Engine Hoist Stand Cherry Picker Ship Crane Folding Lift Garage Workshop Auto Repair Foldable Stand, Red

  • Useful Lift Equipment - The hydraulic engine hoist is the perfect choice for everyday vertical lifting & support in automotive and ag repair shops. It also excels in situations where a combination of sleek design & superior strength is required. From engines to differentials to transmissions and other heavy loads, this hoist gets the job done..
  • 360' Swiveling Wheels - There are six durable wheels on the lift, which can be rolled around & swung in any direction. It provides maximum maneuverability & it is a good choice for moving heavy parts.
  • Heavy Gauge Structural Steel - The engine hoist is made of heavy duty structural steel, durable & sturdy to keep its shape and also very safe when use. With the solid steel construction, it has 4000 lb closed boom capacity & 1000 lb extended boom capacity.
  • Powder Coated Finish - It is painted with glossy corrosion-resistant & anti-rust paint, which can be used both indoors & outdoors. With this feature, it is also very easy to clean.
  • Adjustable Positions & Easy Storage - 4 adjustable positions for your different work needs: 0.5Ton , 1-Ton, 1.5-Ton and 2-Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. The foldable design is good if you are looking for an easy cranes to store.
Check Stock

Omega Pro Hydraulic Long Ram Jack - 4 Ton Capacity with Flat Base for Auto Garage Shop, Green (OP400S)

  • 4 TON LONG LASTING - Omega Pro OP400S Long Ram Jack features 4 Ton lifting capacity and fabricated from hard-cast steel with heat-treated critical stress areas for long lasting..
  • VERSITILE – Omega Pro Long Jack has the heat-treated chrome cylinder for added strength and give you the ability to Lift from 19 7/8" to 35 1/4" to allow you to use for almost anything needing to be raised..
  • DURABLE PERFORMANCE - Hydraulic system is protected from internal damage by a patented by-pass mechanism. Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance..
  • EASY TO USE – Handle includes a rubber grip & jack uses a large hydraulic release handle. Perfect for lifting (not supporting) auto engines, trailers, RV, patios, decks, ATVs and more..
  • WARRANTY - 4 ton long jack features a wide rugged base (5-18" x 4 1/2") to allow you with the ability to easily position and provide the stability and strength. It covers with 1 year manufacture warranty from the date of the purchase..
Check Stock

1 Ton Vertical Locking Plate Lifting Clamp 2200 LBS Capacity

  • Capacity : 2,200 lbs (1 Ton), the clamp will lock in close as well as the open position..
  • This strong lifting clamp is designed for lifting, turning and transporting steel plates..
  • The unique design of the shackle allows the flanges vertical so the plate can be easily stacked or positioned..
  • The Locking feature ensure that the clamp does not slip when lifting force is applied and when the load is being lowered..
  • Inspect prior to usage, never exceed working load limit, avoid shock loads.
Check Stock

BIG RED T46002A Torin Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, 1 Pair

  • Double locking jack stands help support vehicles after lifting with a jack.
  • Handles a wide range of vehicles including small cars, ATV's, UTV's, and more.
  • Features a lifting range of 15-3/8" to 23-13/16" with a 6 ton (12,000 lb) load capacity.
  • Saddle has a large surface area that provides better contact with the load being supported.
  • Constructed with heavy-duty steel and is industrial welded for quality and long term durability.
  • Removable locking support pin provides added security that increases safety by 200%.
  • Wide pyramid style foot base provides added strength.
  • Large foot base delivers additional stability and measures 10.6" x 9.3".
  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place.
  • Includes a limited 1-year manufacturer warranty.
Check Stock

BIG RED T80501 Torin Hydraulic Heavy Duty Long Frame Service/Floor Jack with Foot Pedal 5 Ton 10,000 lb Capacity Red

  • Hydraulic floor jack is ideal for lifting heavy trucks, buses, agriculture and construction equipment.
  • Long frame extends past the overhang of commercial vehicles.
  • Foot pedal control provides quick set-up and rise.
  • Features a 5 ton (10,000 lb) capacity and a lift range between 5-15/16" to 22".
  • Wide stance provides added stability under load.
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Features a built-in safety overload system prevents use beyond load capacity.
Check Stock

WOLF 48\ Ratcheting Off Road Utility Farm Jack, 3 Ton (6,000 lb) Capacity, Black

  • Features a lifting range of 5.12" to 40" and a 3 ton (6,000 lb) load capacity.
  • Utility farm jack is ideal for any application that deals with lifting, pulling, clamping, winching, and spreading.
  • Multi-directional jack is designed to be used vertically and horizontally.
  • Fast lifting mechanism ensures lifting speed and safety.
  • Adjustable top clamp clevis can be moved to any position for clamping purposes.
  • Great for off-road and rough environments, farm-related applications, and as an emergency fire and rescue tool.
Check Stock