YingEnter Professional Plastic Hair Dryer Nozzle Diffuser Hair Dryer Nozzle Comb Attachment Concentrator Replacement Blow Flat Hairdressing Salon Styling Tools,Type A
[Package]: You'll get 2 pcs Black Plastic Hair Dryer Narrow Concentrator Nozzle, One size: 50x60x68 mm/1.96x2.44x2.67 inch The other size: 50x74x75 mm/1.96x2.91x2.95 inch.
[High temperature resistant nylon material]: Our hair Dryer Narrow Concentrator Nozzle is made of high temperature resistant nylon material, high temperature, deformation. It can work well under 150 degrees for a short time.
[Good experience]: With the influence of the nozzles, it can help the air flow gather and disperse, reduce impact for your hair. If your hair dryer diameter below 4.5cm, please use with sponge rubber pad together. New black high-temperature resistant plastic black Hair Dryer Nozzle can make your hair drier lighter, more durable, and more powerful..
[Easy install]: Take off the old air nozzle and put the new air nozzle on the air outlet of the hair dryer, you'll get it.
[warm Tip]: The following three situations cannot be used: 1. Diameter is less than 42mm ,or more than 46mm 2.Metal material hair dryer cannot use 3.Foadable hair dryer cannot use it.
The nozzle is made of quality brass material, corrosion resistant and durable, long service lifespan, beautiful brass golden color, high-grade looking..
This is a small to large injector nozzle generates a lively full water pattern and offers oxygen enrichment. With injector effect, water and air are suctioned in, mixed intensively and accelerated into the air by the injector jet as an impressive soft flowing fountain..
Applicable in the courtyard, garden, kitchen garden and another small area of agricultural spray irrigation.
lawn, green belts, gardens and another small area of gardening sprinkler.
sprinkler irrigation and industry, and another small area of cool roofs..
The nozzle can be adjusted towards different directions. Fan-shaped fountain nozzle to form a fan-shaped water column, which is pretty attractive when illuminated by underwater colorful lights at night..
Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)
[Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
[High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
[High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
[Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....
MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle
100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
AUXO Modern Single Handle Single Hole Deck Mount Kitchen Sink Faucet with 360 Rotating Nozzle, Commercial Retractable Pot Filler Kitchen Faucet in Brushed Nickel, Stainless Steel
✦【Material】AUXO retractable deck mounted kitchen faucet is constructed from stainless steel and finished in brushed nickel, scratches and tarnish resistant..
✦【Features】17.32''/440mm spout reach with a 360-degree swivelling nozzle is able to reach any corner of your under-mount sink, perfect for pot filling..
✦【Specifications】Easy to install with single hole deck mounting. Installation hole diameter: 1.26"-1.49" / 32-38mm (1.38" / 35mm recommended). Faucet Height: 13.74" / 349mm. Minimum Clearance to Wall: 4''/101.6mm.
✦【All Hardware Included】Faucet, Ceramic Valve, all mounting hardware and hot/cold waterlines are included..
✦【Warranty & Service】30 days hassle-free return and replacement. Lifetime Limited Warranty(residential), 5 Years Limited (commercial). Please feel free to contact us with any issues related to the item or its mounting..
HOW TO USE: Begin by Massaging a Small Amount of Oil onto Ear Lobe and Then Slowly Insert the Small End of Taper. Wax Will Thicken Lobes While Assisting in Maintaining Healthy, Hydrated Skin. Please Remember to Be Patient with Your Body as It Recovers..
NATURAL: Jojoba Oil is a Premium Skin Piercing Care Wax to Maintain Healthy Skin. No Added Essential Oils or Fragrances, Natural Mild Nutty Scent. BENEFITS: Jojoba Oil Moisturizes Skin by Forming an Oily Layer on the Top of the Skin that Traps Water in the Skin..
UNIQUE DESIGN: New And Unused, Our Product is Proudly Designed in the USA. We Work Hard on Advancing Our Production Processes and Quality Levels Under Strict Quality Control Measures. SATISFACTION: Product is Covered with 90 Day Money Back Guarantee..
AKISEKTR HVLP Spray Gun Set Newest Automotive Spray Paint Gun with Pressure Gauge 3 Nozzles 1.4/1.7/2mm Nozzle and 600cc Cups Clear Spray Cup with Scale for Car Primer Furniture Surface Spraying
...oy, The latest style of spray cup is transparent with a scale, which can help you clearly see the amount left in the spray cup, lightweight and compact for easy to carry. HVLP technology helps to reduce the waste of residual material in the color cup.
The package includes: 1 x Spray Gun, 1 x Pressure gauge,1 x 1.4mm Nozzle, 1 x 1.7mm Nozzle, 1 x 2.0mm Nozzle, 1 X 600cc Cup, 1 X Brush, 1 X Upper Pot Filter,1 X Cup Sealing Plugs,1 X Spanner, 1 X Disposable Lids,1x Instruction Manual..
Adjustable: 1.4/1.7/2.0mm 3 size nozzles, easier to control. Adjust the spray cap to control the nozzle direction 360° direction controllable. Air spray gun 1.4mm tip with replaceable 1.7mm 2.0mm nozzle needle cap, wrenchr, nut, filter, connector and brush, which can fully meet your requirements.
Our Advantages: This spray gun makes the spraying softer easily controlled and less overspray. Ideal for spraying basecoats, clearcoats and other high viscosity coatings also suitable for domestic and industrial primer, topcoat and detailing for automotive industry, equipment and furniture paint applications..
Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle
ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
10 Pieces Airbrush Nozzle Needle Nozzle Cap Kit with Wrench Airbrush Replacement Parts for Spray Gun Sprayer Accessories 0.2 mm 0.3 mm 0.5 mm
What you will receive: package comes with 3 pieces airbrush nozzle in 0.2 mm, 0.3 mm, 0.5 mm, 3 pieces 0.2 mm, 0.3 mm, 0.5 mm airbrush needle, 3....
Quality material: all airbrush replacement parts are made of quality metal, sturdy and not east to break or deform, durable for long time use and not....
Measurements: airbrush nozzle and needle is suitable for 0.2 mm/ 0.3 mm/ 0. 5 mm airbrush, they are suitable for professional airbrush sprayer and....
Easy to use: with this wrench, you can quickly replace airbrushes, the replacement nozzles and caps fit almost all ordinary airbrush, save you much....
Suitable for: airbrush nozzle replacement kits are suitable for professional airbrush sprayer, easy to install.
