Best 185mm Nozzle

G830 2.0 Gelcoat Spray Gun

  • 【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
  • 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
  • 2 x 1000ml Plastic Cup (with metal cup cover).
  • 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
  • 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
  • Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
  • Hold thehandle and hold the gun. The air is ejected from the air jet..
  • 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other materials such as parting films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced gelcoats, adhesives and paints..
Check Stock

Nanoxia Hydra 120mm 4200rpm High Speed Fan for GPU Mining Rig Servers, 3 Pack

  • Powerful computer case fan where high airflow is primary objective and loud noise is tolerable (58.7 dBA)..
  • Fan size is ultra thick at 38 mm, uses 4 pin Molex connector, and requires 16.8 Watts ([email protected]) of power..
  • 185.87 CFM and 12.15 mmH²O pushes a lot of air through high density GPU servers to cool your heatsink and radiator..
  • Industrial grade ball bearing for long lasting core even when stressed at high temperatures and high speeds..
  • Package includes three 120x120x38mm fans rated at 4200rpm, 58.7dBA, 185.87CFM, 12.15mmH2O, 12V, 1.40A..
Check Stock

GIBTOOL Universal Vacuum Attachments Accessories Cleaning Kit Brush Nozzle Crevice Tool for 1 1/4 inch& 1 3/8 inch Standard Hose 6pcs

  • 1 1/4” Wet or dry vacuum crevices tool for cleaning tight spaces. 1 1/4” utility nozzle with plastic brush, the brush can be removed, for floor cleaning.
  • 1 1/4” horsehair bristles round brush, for cleaning and dusting tables and counter tops, air and heating vents, mini and vertical blinds.
  • 1-1/4” Nozzle Combination Tool, designed to clean the crevice and dust the board..
  • 1 1/4” upholstery tool, ideal attachment for domestic cleaning. Anti-static Prfect for cleaning sofa, stairs and small areas. 1-3/8”(35mm) to 1-1/4”(32mm) Hose Adapter, use 1-3/8-inch1 hose with 1/2-inch accessories..
  • 6 pieces vacuum cleaner attachements accessory kit includes crevice tool, horsehair bristles round brush, utility nozzle with brush, upholstery tool, brush & nozzle combination tool, and 35mm(1 3/8inch) to 32mm (1 1/4 inch) adapter, The kit is only for vacuums accepting 35mm or 32mm inner diameter attachents. Please measure and confirm your vacuum attachments inner diameter before purchasing..
Check Stock

7Penn Vertical Meat Stuffer – 3L Sausage Stuffer Machine with Vertical Stuffer Nozzles, Manual Sausage Press Machine

  • ...wild game sausages, hotdogs, and rope bratwurst.
  • EASILY LOAD AND CLEAN: Summer sausage stuffer cylinder tilts out when compression plate is withdrawn completely.
  • 8-inch (20.3cm) tall stainless steel sausage stuffer barrel features a 5.5-inch (14cm) diameter and holds up to 3 liters (7 pounds) of ground meat.
  • Piston, nozzle retainer, sausage filler barrel, and plastic sausage stuffer nozzles are removable for easy cleaning.
  • VARIOUS SIZED NOZZLES: 4 plastic nozzles are included to allow versatility with your sausage making supplies.
  • 15mm (.6 inch) nozzle works well for mini smokies, while the 20mm (.79 inch) nozzle is designed for snack sticks and breakfast sausages.
  • Make hotdogs and rope sausage with the 32mm (1.25 inch) nozzle or bologna and pepperoni rings with the 40mm (1.57 inch) nozzle.
  • Each 7-inch (17.8cm) long nozzle attaches to your meat sausage stuffer machine with the steel nozzle retainer.
  • BUILT TO LAST: Stainless steel gears provide durability and longevity to your new sausage casing stuffer sausage machine.
  • Piston compression plate features air valve to release air pressure and improve ease of use.
  • Always lubricate threaded rod between uses to avoid stripping.
  • Compliant with LFGB and SGS food safety standards.
Check Stock

Le Lematec Soda Blaster and Sandblaster Long Nozzle Attachment Bundle

  • Heavy-duty Soda Blaster with long nozzle attachment combo for spot sandblasting and detailing. Bring this bundle to any workshop or garage for quality and reliable performance to achieve quality results..
  • The AS118 Soda Blaster gives you a clean finish that's fast and easy. This powerful blaster removes paint, rust, grease, and much more. Use it on cars, trucks, farm equipment and tools - or simply give your grill a good cleaning. Steel Nozzle Allows Precise Blasting- With a range of 90-150 PSI..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste. Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm..
  • Perfect bundle for any blasting lets you configure nozzle attachments according to your blasting preference..
  • Add more power and flexibility to your sandblaster with the long nozzle attachment..
Check Stock

M MINGLE Foam Cannon for Pressure Washer, Foam Lance Kit for Cars or SUVs, Pressuer Washer Gun with 5 Nozzle Tips

  • Foam cannon kit includes a foam cannon, a pressure washer gun, 5 nozzle tips, a coupler (M22 15mm male to M22 14mm female), a micro fiber mitt and 5 micro fiber towels..
  • Pressure washer foam cannon has adjustable the knob on the top, provides desired foam level. The nozzle adjusts the sprinkle pattern. Foam Gun will disperse thick foam, remove dirt from your car quickly. Container Capacity: 1 Liter / 0.22 Gallon. Specification: 1000 PSI to 3000 PSI..
  • Soap dispenser for pressure washer is ideal for Motorcycle, Car Washing.
  • Floors, Windows washing. Best product for jet washing Detailing Trucks and SUVs..
  • Power washer gun not fits gardenhose and waterhose. If pressure washer hose has M22 14mm fitting with 14mm inside diameter, connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, connect the brass coupler between gun and hose..
  • 5 Spray Nozzle Tips: They have different spray angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to your needs. Such as watering flowers and plants, washing car..
Check Stock

VCT Pneumatic Air Texture Spray Gun 1.5 Gallon Hopper with Handle Includes 3 Additional Nozzles (4, 6, 8 mm)

  • *Easy grip handle make spray gun comfortable to hold.
  • Each parts can be detached easily.It is easy to clean..
  • *Adjustment knob allows a full trigger pull at any spray setting.
  • *Come with three types of nozzles meet your various needs:1x 4mm nozzle,1x 6mm nozzle, 1x 8mm nozzle..
  • *Made of anti-rust aluminium alloy spray gun and durable plastic hopper which supports up to 1.5 gallon. It’s lightweight but durable enough to use..
  • Interchangeable 4mm, 6mm, 8mm nozzles for spraying liquids of different viscosity.
  • spray angle allows for us on both walls and ceilings.
Check Stock

KUANMIN Chick Feeder & Water Kit, 3.3lb Chick Feeder & 1L Chick Waterer, Plastic Poultry Feeder (Red and White)

  • Sizes: Size of Feeder: approx. 185*185mm (7.28'' x 7.28''), can contain 3.3lb food.
  • Size of Waterer: 190*175mm (7.48'' x 6.9'')..
  • Easy to Use: Just fill up food from the top mount of the feeder. Wide application: Suitable for chicks, ducks, geese, pigeons, birds or any kinds of poultry feeding..
  • Design: Red would stimulate chicks to take food/ drink..
  • Made of Polypropyl Plastics: Thin & Light. Anti-aging, anti-corrosion, wear resistance..
  • If you have any question about the producets, please feel free to contact us. We are pleased to help you..
Check Stock

Le Lematec Sandblaster Long Nozzle Attachment, Sandblasting Nozzle Tip for Portable Sandblaster, Sandblasting Accessory for Spot Blasting

  • Heavy-duty Sandblasting Long Nozzle made of steel and aluminium that is very suitable for tough working environments and high-speed sandblasting operations..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste..
  • Clean hard-to-reach areas, tight spaces, and small and complex objects easily with our long nozzle sandblaster tip (sandblaster gun sold separately). Easy to install and replace, switch from a short nozzle to this long nozzle..
  • Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm.
  • Compatible with all Le Lematec sandblasters and support various media. Refer to our media guide for a complete list of abrasives and sizes..
Check Stock

CHPOWER CR-10 hotend Assembly MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W

  • This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • 100% original and high quality 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence..
Check Stock