Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)
[Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
[High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
[High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
[Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....
MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle
100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
AKISEKTR HVLP Spray Gun Set Newest Automotive Spray Paint Gun with Pressure Gauge 3 Nozzles 1.4/1.7/2mm Nozzle and 600cc Cups Clear Spray Cup with Scale for Car Primer Furniture Surface Spraying
...oy, The latest style of spray cup is transparent with a scale, which can help you clearly see the amount left in the spray cup, lightweight and compact for easy to carry. HVLP technology helps to reduce the waste of residual material in the color cup.
The package includes: 1 x Spray Gun, 1 x Pressure gauge,1 x 1.4mm Nozzle, 1 x 1.7mm Nozzle, 1 x 2.0mm Nozzle, 1 X 600cc Cup, 1 X Brush, 1 X Upper Pot Filter,1 X Cup Sealing Plugs,1 X Spanner, 1 X Disposable Lids,1x Instruction Manual..
Adjustable: 1.4/1.7/2.0mm 3 size nozzles, easier to control. Adjust the spray cap to control the nozzle direction 360° direction controllable. Air spray gun 1.4mm tip with replaceable 1.7mm 2.0mm nozzle needle cap, wrenchr, nut, filter, connector and brush, which can fully meet your requirements.
Our Advantages: This spray gun makes the spraying softer easily controlled and less overspray. Ideal for spraying basecoats, clearcoats and other high viscosity coatings also suitable for domestic and industrial primer, topcoat and detailing for automotive industry, equipment and furniture paint applications..
Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle
ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Vacmaster VBV1210 12-Gallon* 5 Peak HP** Wet/Dry Shop Vacuum with Detachable Blower Blue
Easily Convert from Wet/Dry Vacuum to 210 MPH Handheld Blower.
19-Foot Cleaning Reach with Hose and Power Cord.
Extra Large Drain Port. Power Cord Length- 12 feet.
INCLUDED ACCESSORIES: 7' x 2-1/2" Secure Fit Hose, (2) Extension Wands, Utility Nozzle, Crevice Tool, Car Nozzle, Concentrator Nozzle, Blower Adapter, Air/Noise Diffuser, Standard Cartridge Filter and Foam Wet Filter..
10 Pieces Airbrush Nozzle Needle Nozzle Cap Kit with Wrench Airbrush Replacement Parts for Spray Gun Sprayer Accessories 0.2 mm 0.3 mm 0.5 mm
What you will receive: package comes with 3 pieces airbrush nozzle in 0.2 mm, 0.3 mm, 0.5 mm, 3 pieces 0.2 mm, 0.3 mm, 0.5 mm airbrush needle, 3....
Quality material: all airbrush replacement parts are made of quality metal, sturdy and not east to break or deform, durable for long time use and not....
Measurements: airbrush nozzle and needle is suitable for 0.2 mm/ 0.3 mm/ 0. 5 mm airbrush, they are suitable for professional airbrush sprayer and....
Easy to use: with this wrench, you can quickly replace airbrushes, the replacement nozzles and caps fit almost all ordinary airbrush, save you much....
Suitable for: airbrush nozzle replacement kits are suitable for professional airbrush sprayer, easy to install.
Tool Daily Short Pressure Washer Gun with Foam Cannon, 1/4 Inch Quick Connector, with 5 Pressure Washer Nozzle Tips, 1 Liter
...de diameter, please connect the gun to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
Adjustable Snow Foam Lance with 1/4" quick disconnection fitting. Container Capacity: 1 Liter / 0.22 Gallon. Specification: 1000 PSI to 3000 PSI. Adjustable nozzle for accurate mixing and foam generation. Turn the top knob right (-) to get the thickest mixture, adjust the nozzle to get a proper sprinkle pattern, and let it loose..
5 Nozzle Tips have different angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to the actual need. Such as watering flowers and plants, washing car. They also can be attached to a Quick-Connect Wand for swifter application and more..
Application: ideal for Motorcycle, Car Washing.
floors, Windows washing, it is best product for Detailing Trucks or SUVs..
25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/Ender 5 Pro, Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer
Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing..
Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box..
Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier..
High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging..
Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D prin....
3D Printer Nozzles 26PCS Hardened Steel and Brass MK8 Nozzles 0.4MM with Cleaning Tool Kit for Makerbot Creality CR-10/ Ender 3/5 Compatible with All 1.75mm PLA ABS 3D Printer
MK8 nozzle Parameter: Input diameter 1.75mm.
Wide compatibility :0.4mm nozzlethe input diameter is 1.75mm, m6 thread, suitable Compatible with 3D printer Makerbot Anet A8, MK8 Reprap Prusa I3,....
Value for money: package comes with 4 pieces of hardened steel nozzles, 12 pieces brass nozzles, 5 nozzle cleaning needles, 1 Nozzle Spanner , 1 Box....
Premium material : MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material is....
Cleaning needles ,wrench : 5 Flexible stainless steel needles with a of are used to clean 3D printer extruder hot end nozzle clogs and other hard to....
ESKONI Hand Crank Aluminum Rotary Gas Oil Fuel Hand Pump 10 Gpm Self Priming Dispenser
[ TRANSFER RATES ] Transfers up to 2.4 Gallons per Minute with Flow Control Nozzle. Control the flow by squeezing the nozzle lever, Lower Level Tigger Position is great for refueling gas, diesel and more & Upper lever trigger position is great for watering sessions. Nozzle can also be locked for longer watering or fueling sessions.
[ RECOMMENDED ] Suitable for Gasoline, diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils - Discharge Hose of 120-inch ( 10ft ) for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle.
[ TELESCOPIC TUBE ] Suction Tube length of about 15-inch to 20-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can, to 5-Gallon Pails & up to 20-Gallon Drum Barrels - Suction end Outer Diameter: 1.2-inch - Swivel Nut Nozzle prevents hose from tangling with 360 degree rotation.
[ BATTERY POWERED ] Powered with Two (D) Battery Powered, Sold Separately - Big Slide Switch: Big On/Off Switch - Works great with farm equipment, Industrial Vehicles and in Automotive Shops - U-Shaped battery compartment: U-shaped hook for easier storage.
