1.The PCE-G2S4 PCIE to 4-Ports NONE-RAID SATA III 6Gbps card will allow users add 4X SATA III ports on desktop PCs, servers, and NAS system for HDD/SSD storage expansion or boot use..
2.Based on ASMedia ASM1061SATA III (Serial ATA) advantage HCI controller and ASMedia ASM1093 SATA port multiplier. Provide 4X SATA III 6Gbps ports for PCs and Servers..
3.This model support Windows system only,install the driver before add the SSD/HDD in system...
4.Complies with Serial ATA Revision 3.0. Support SATA III speed 6Gbps, SATA II speed 3Gbps, SATA 1 speed 1.5Gbps. PCE-G2S4 was set default mode on AHCI, it also supports IDE mode or none boot mode. Users can push the mode selector on the mode they need..
5.PCIE Gen 2 X1 interface design, will works on PCIE X1, X2, X4, X8, X16 slot. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase..
SinLoon 2.5 Hard Disk Drive SATA 22Pin to eSATA Data USB Powered Cable Adapter for Optimized for SSD Support UASP SATA IIIEC-SSHD Black
USB A Male(usb is only suppy power 5V) + eSATA male to SATA 22pin HDD 2.5" Driver.
External SATA 6 Gbps Shielded cable brings the high performance of External Serial Advanced Technology Attachment (eSATA) from your computer or DVR to....
Our cable Supports all 2.5 SATA HDD, SSD, BLU-RAY DVD, CD-ROM, DVD-ROM, CD-RW, DVD-RW and DVD+RW combo devices.
The USB + eSATA male plug in your PC at the same time, it can reach the speed of power eSATA.
If you use it with your 3.5 or 5.5" HDD, then please make sure that your USB devices offer 12V Power.
Reletech 2.5\ External Hard Drive Enclosure, SATA to USB 3.1 Tool-Free Clear for 2.5 Inch SSD & HDD 9.5mm 7mm External Hard Drive Case Supports UASP SATA
2.5" External Hard Drive Enclousre: Easily connects your 2.5 inch SSD & HDD to PC, laptop, PS4, Xbox for data transfer or expanding storage. It protects the hard disk from outside scratches and makes SATA hard drive portable for data store. It is awsome for booting up old hdd/ssd and recovering important files of broken PC..
Universal Compatibility: Supports Windows, LINUX, Mac OS 8.0 and above systems. Designed for 2.5 inch 7mm/9.5mm SATA HDD & SSD up to 2TB..
Easy Installation: Tool free installation. Plug & Play, No driver needed for this SATA enclosure. Just push out the cover, plug in the drive, close the cover and go. Hot-swap supported. No request for extra power supply.（ Note: Some 2.5-inch HDD require 12v voltage input, this product only supports 5v output to the HDD, please check before using.）.
5Gbps UASP Fast Speed: The Reletech ssd/hdd drive enclosure is design with SATA to USB3.0 protocol with the maximum transfer rate can reach up to 5Gbps, at the same time, the external hdd enclosure can support UASP accelerated transmission protocol to greatly improving the storage or backup efficiency of the devices..
Package included: 1*2.5 inch hard drive enclosure, 1* micro B to usb 3.0 cable..
Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches
SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies.
Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection.
Upgrade cost saver SATA power splitter cable spares the expense of upgrading an existing power supply to connect new SATA drives.
Cost-effective 2-pack provides a spare power cable for new installations or repairs.
Keep a spare in your IT toolkit or at the test bench.
DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals.
Provides sufficient length for internal cable management to minimize airflow impact in most configurations.
Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Applicable to 2.5 /3.5 HDD/SSD with 12V/2A Power Supply SA03001
Universal USB to SATA/IDE Adapter: Supports 2.5"/3.5" SATA HDD and SSD, 2.5"/3.5" IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVD+RW Optical Drive,two IDE....
Works with up to 3 HDDs: This USB 3.0 to IDE and SATA adapter is equipped with a SATA III connector and 2 IDE connectors (one 2.5" and one 3.5"). It....
High Speed Transfer: Data transfer speed reaches up to 5Gbps. Backward compatible with USB 2.0/1.1..
Support Systems: Windows 11/XP/Vista/7/8/10(32bit and 64bit).
on/off switch for HDD protection. Led light shows power and activity status..
StarTech.com 3.5" External Dual Hard Drive Enclosure Raid USB-C and USB-A SATA 6Gbps 2 Bay USB 3.1 SSD/HDD Enclosure (S352BU313R)
Create high performance external storage with a dual SATA HDD RAID array through USB 3.1 (10Gbps).
2-Bay 3.5" HDD Enclosure with RAID support, including RAID 0, RAID 1, JBOD and SPAN (BIG).
2-Bay hard drive enclosure supports SATA I/II/III (up to 6Gbps) and USB 3.1 Gen 2 (backward compatible with USB 3.0 / USB 2.0).
Dual 3.5" HDD/SSD/SSHD External Drive Enclosure provides high speed, high-capacity external data storage for your USB-C or USB-A laptop or computer (both USB-C and USB-A cables included).
Solid aluminum enclosure with metal hard-drive mounting tray and built-in fan to assist in heat dissipation / 2-drive 3.5" HDD/SSD RAID enclosure / 2-bay 3.5in enclosure / 2-bay 3.5" HDD RAID enclosure / 2-bay 3.5" SSD enclosure / Dual 3.5" HDD enclosure / Dual bay SATA enclosure / 2-bay 2.5" RAID enclosure.
HGST Ultrastar He8 Helium (HUH728080ALE601) 8TB 7200RPM 128MB Cache SATA 6.0Gb/s 3.5in Enterprise Hard Drive - 5 Year Warranty (Renewed)
NOTE: These HDD is used by Datacenter Servers for about 3 Years period. HDD was refurbished and data wiped with DoD standard. It’s fully tested & passed HGST factory diagnose software test. Since this is heavy duty enterprise HDD with a 2.5M-hour MTBF rating. We are confidence that to honor another 5 Years Warranty for these hard drives. Buy with confidence & worry free!.
8TB, 128MB Cache, 7200RPM, SATA III 6.0Gb/s – Designed for 24/7/365 Heavy Duty, 2.5M-hour MTBF.
Works for Any SATA Server, NAS (network storage), RAID, PC/Mac, CCTV DVR, Surveillance System, CCTV DVR.
Bare Drive Only, Single Pack, (No Screws, Cables or Accessories included) -Friendly Reminder- Please FORMAT HDD on system in order to be detected/shows on system..
5 Year Warranty from Reseller, Worry free Return! 100% Full Refund.
HOT New Hard Disk Drive 2 5' inch SATA 22Pin to eSATA Data USB Powered Cable Adapter 0.5M(1pack)
USB A Male + eSATA male to SATA 22pin HDD 2.5" Driver External SATA 6 Gbps Shielded cable brings the high performance of External Serial Advanced Technology Attachment (eSATA) from your computer or DVR to external storage devices with eSATA ports..
Replace or expand the internal hard drive of a DVR or Satellite receiver box. Connect to an external SSD docking station for swifter data transfer speeds than USB 3.0 for file backup and expanded storage..
Our cable Supports all 2.5 SATA HDD, SSD, BLU-RAY DVD, CD-ROM, DVD-ROM, CD-RW, DVD-RW and DVD+RW combo devices.
compatible with Windows XP/Vista/7/8/10 and Mac OS..
the USB + eSATA male plug in your PC at the same time, it can reach the speed of power eSATA.
If you use it with your 3.5 or 5.5" HDD, then please make sure that your USB devices offer 12V Power.
GeeekPi Raspberry Pi 4 SATA Storage, Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield (Only for Raspberry Pi 4B)
Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board.
X825 Case,please refer to ASIN: B093WYWVRX.
Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD ..
OS compatiable: All Raspberry Pi operating systems.
USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller.
Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack.
Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included.
