Best 2 8 10x40

Husky 15-in-1 Screwdriver/Nut Driver

  • 7 PHILLIPS HEADS: 2 x #0 (1.5”, 2.5” shank), 1 x #1 (3” shank), 3 x #2 (4”, 6”, 8” shank), 1 x #3 (6” shank).
  • 8 SLOTTED HEADS: 1 x 1/8“ (2.5” shank), 3 x 3/16” (4”, 6”, 8” shank), 2 x 1/4“ (4”, 6” shank) 2 x 5/16” (6”, 8” shank).
  • IDENTIFICATION MARKINGS are molded into the handles, so you’ll be able to quickly pull the correct tool from your bag or belt.
  • DUAL MATERIAL HANDLE allows for an easy grip. The textured material will give you precise handling, even in slippery conditions.
  • HEAT TREATED STEEL ALLOY prevents cam out when tightening fasteners on the jobsite.
Check Stock

Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

TEKTON 1/2 Inch Drive 6-Point Socket and Ratchet Set, 58-Piece (3/8-1 in., 10-24 mm) | SKT25301

  • Complete set has every size from 3/8 to 1 inch and 10 to 24 mm in both deep and standard lengths.
  • 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
  • Finely geared 90-tooth ratchet needs only a 4-degree working swing arc.
  • Includes tools not found in most sets like a universal joint and extensions.
  • Strong, resilient storage case with built-in parts tray keeps everything organized.
  • Includes (11) 1/2 in. drive 6-pt. inch sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in., (11) 1/2 in. drive deep 6-pt. inch sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in., (15) 1/2 in. drive 6-pt. metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm, (15) 1/2 in. drive deep 6-pt. metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm, (1) 1/2 in. drive 90-tooth quick-release ratchet: 10.5 in., (1) 1/2 in. drive breaker bar: 18 in., (2) 1/2 in. drive extension bars: 3, 10 in., (1) universal joint: 1/2 in. drive, and (1) storage case.
Check Stock

3 Armour Etch Over N Over Reusable Glass Etching Stencils Set | Nautical Theme | Paradise, Seashore, Under The Sea

  • Both letter stencils: narrowest letter- 1/8-inch wide, widest letter- 1/2-inch wide, all letters- 5/8-inch high.
  • Berry Floral: Upper left- 2 1/2-inch w by 2 1/2-inch h. Center left- 1 1/8-inch w by 1-inch h. Bottom left- 2 1/2-inch w by 2 7/8-inch h. Top & bottom right- 1 1/4-inch w by 1 1/4-inch h. Right centers- 3/4-inch w by 1 7/8-inch h..
Check Stock

Drillco 2000R Series 63 Piece High-Speed Steel Tap and Carbon Steel Round Adjustable Die Set, Uncoated (Bright) Finish, UNC and UNF Thread

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Set includes : 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4″-20, 1/4″-28, 5/16″-18, 5/16″-24, 3/8″-16, 3/8″-24, 7/16″-14, 7/16″-20, 1/2″-13, 1/2″-20, 9/16″-12, 9/16″-18, 5/8″-11, 5/8″-18, 3/4″-10, 3/4″-16, 7/8″-9, 7/8″-14, 1″-8, 1″-12, and 1/8″-27, 1/4″-18.
  • Comes with 1-inches & 2-inches round die stock, #7 to 1/2-inches & 1/4-inches to 1-inches adjustable tap wrench, #0 to 3/8-inches t-handle tap wrench and 2 screwdrivers.
  • Comes in an attractive, hand made, wooden case.
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Check Stock

(4) HC85 8\ 700 Watt Black In-Ceiling Home Theater Speakers+JBL Subwoofers

  • Package Includes: (2)Pair Rockville HC85 Black 8" 700 Watt In-Ceiling Home Theater Speakers 8-Ohm. (1) JBL CONTROL 19CS 8" 200 Watt In-Ceiling Home Subwoofers 8-Ohm Sub. Features: Pair Rockville HC85 Black 8" 700 Watt In-Ceiling Home Theater Speakers 8-Ohm. Peak Power Handling: 350 Watts (per speaker) / 700 Watts (per pair). RMS Power Handling: 120 Watts (per speaker) / 240 Watts (per pair). Polypropylene Cone. Rubber Surround. 8 Woofer. 1 Aluminum Voice Coil. Mylar Dome Tweeter.
  • 20 oz. Ferrite Magnet. High Quality Spring Loaded Push Terminals. Aim-ableSwivel Tweeter. Paintable Flush Mount Grills. Frequency Response: 40Hz 20KHz. Sensitivity: 89dB @ 1w / 1m. Impedance: 8 Ohms. Mounting Depth: 3.03. Cut-out Diameter: 9.3. Color: White (paintable). JBL CONTROL 19CS 8" 200 Watt In-Ceiling Home Subwoofers 8-Ohm Sub. Unique Nested Chamber design and Linear Dynamic Aperture port design delivers high output from a compact enclosure..
  • JBLs exclusive SonicGuard overload protection allows higher operational levels and improved. system reliability.. Component: Long excursion 200 mm (8 in) driver.. Packaged with grille, backcan and tile rails for fast installation and easy stocking.. Simple installation and wire connection method.. Frequency Range 42 Hz - 200 Hz. P....
Check Stock

Chain Link Fence Commercial Strong Arm Double Gate Latch for 1-5/8\ thru 2\ Gate Frames Pipe Sizes. Use this Double Gate Latch Where 2 Gates Swing Together.

  • Easy to install on standard gates, even on existing gates (on 2-3/8" Posts and 1-3/8" Gate Frames).
  • Meets Most Pool Codes. Will allow gate to swing both ways.
  • Pad-Lockable at easy 45 degree convenient angle.
  • Self-latching with spring closers. Latch for fits around 2-3/8" (2-1/2") Gate Posts Only.
  • Fits Round Gate Frame 1-3/8" X 2-3/8" Post. Works with Gate Spring Closer 1-3/8" X 2-3/8".
Check Stock

White Water Stainless Steel Gunwale-Mounted Removable Ladder

  • 4-Step A) Deployed Overall Length: 45-1/2″ , B) Center to Center 13″, C) Stowed Length: 28-3/8″, D) 14-3/8″, E) 7-1/8″, F) Standoff Length from boat: 8-1/2″,.
  • 5 Step – A) Deployed Overall Length: 55-3/4” B) Center to Center 13” C) Stowed Length: 38-1/4” D) 18-5/8” E) 7-3/8” F) 8-1/2″.
  • Weight Capacity: 400 lbs. , Meets ABYC H-41 requirements.
  • Gunwale Hook: 6-3/8″ , Overall Width 13-3/4″.
Check Stock

24 Piece Mechanics Tool Set - SAE & Metric

  • This 1/2-in drive mixed depth impact socket set contains 24 SAE and metric standard depth sockets, 24 SAE and metric deep sockets, 3 extensions, 3....
  • This set is intended for use with an impact tool to provide maximum installation of heavy duty fasteners.
  • Standard depth impact sockets include 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 and 27mm as well as 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16,....
  • Deep impact sockets include 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 and 27mm as well as 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1....
  • 1/2-in drive accessory tools include a 3 impact extensions measuring 3-in, 6-in and 10-in, a 1/2-in drive impact swivel adapter, a 3/8-in drive impact....
Check Stock

WoodRiver 6-Piece Carbide-Tipped Countersink Set with Brad Point Pilots

  • Includes: 7/64" x 3/8", 1/8" x 3/8", 9/64" x 3/8", 11/64" x 3/8", 13/64" x 1/2" and 1/4" x 1/2" Carbide-Tipped Countersinks in a wooden case.
  • Carbide-tipped countersink cuts extremely clean hole.
  • 3/8" dia. countersink 8mm shank, 1/2" dia. countersink 10mm shank.
  • Brad point drill bit is adjustable for screw length, bits range from 2-1/2" to 3-1/8" long - Countersink set is sized for #6 - #14 screws driven in hardwood.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock