Best 2 8 Inch Qvga

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

  • ...sor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
  • Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes.
  • Remove and install parts on most domestic and some international vehicles.
  • USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (driver tools not included).
  • Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included).
  • BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
  • Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion.
  • CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8” x 50mm, 3/8 inch dr x 7/8” x 6PT x 80mm, 3/8 inch dr x 7/8” x 6PT x 90mm, 3/8 inch dr x 7/8” x 30mm, and 3/8 inch dr x 1” and 1-1/6” x ....
Check Stock

Global Door Controls GLC-5110B-626 Commercial Passage Ball Knob in Brushed Chrome

  • Door thickness: adjustable 1 3/8-inch-1 7/8-Inch: backset: 2 3/4-inch: strike: ANSI 1 1/4-inch x 4 7/8-Inch curved lip.
  • Keying: Schlage 5 pin keyed: key: 2 five pin Nickel plated.
  • Construction: steel, zinc Dichromate resists corrosion, heavy duty spring cage reinforced for knob return.
  • Latch: 1/2-inch projection stainless steel.
  • bore: 2 1/8-Inch hole retrofits all grade 2 cylindrical locksets.
  • Easy installation - minimum working parts.
Check Stock

B&P Lamp 5 1/4 Inch Modern Shallow Steel Canopy Kit with Hardware, Black

  • 1/8 IP slip center hole and bar holes measure 2 3/4 inch center to center.
  • Includes 4 inch offset crossbar with ground screw, 6.75 inch long ground wire with 8 rings on each end, black cord grip busing, 2 pieces of 1.5 inch long 8/32 screws, 2 pieces of 1 inch long 8/32 screws and 2 matching color acorn cap nuts.
Check Stock

CJ Online Shop V-Die Block Press Brake Sold Steel 6 Inch 4-Way 2-3/8 Inch x 2-3/8 Inch 7.5 Pounds Perfect Accessory

  • V-Die Block Press Brake Sold Steel 6 Inch 4-Way 2-3/8 Inch x 2-3/8 Inch.
  • This 4-Way V-die Is The Perfect Accessory For Bending Thin Material.
  • Heavy Duty Solid Steel Block. This Die Is Precision Machined And Designed To Last.
  • Block Size: 6 Inch x 2-3/8 Inch x 2-3/8 Inch.
  • Dimension: 6 in L x 2-3/8 in W x 2-3/8 in H *Rough Estimation* Weight: 7.5 Pounds *Rough Estimation*.
Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

  • PERFECTLY MATCHED MULTIPLES: The DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16” to 1” Inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates.
  • COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches).
  • Fits 1/4-inch and thinner template material.
  • Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID.
  • IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
  • When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
  • These solid brass bushings will prevent damage to the bit and the bushings themselves.
  • EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded....
Check Stock

Bostitch Air Compressor Combo Kit, 3-Tool (BTFP3KIT) 21.1 x 19.5 x 18 inches

  • SB-1850BN 18 GA brad nailer in the air compressor combo kit drives 18GA brad nails from 5/8-inch to 2-inch.
  • SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4-inch to 2-1/2-inch.
  • BTFP71875 heavy-duty 3/8-inch crown stapler drives 3/8-inch crown staples from 1/4-inch to 9/16-inch and 18GA brad nails from 1/2-inch to 5/8-inch.
  • 1/4-inch x 15' PVC air hose includes fittings.
Check Stock

ATD 7430 1000 lbs Telescopic Transmission Jack

  • The minimum height is 37-7/8 inch and maximum height is 77-5/8 inch.
  • It has a saddle base of 8-7/8 inch x 7-1/8 inch and an expandable area of 11-1/2 inch to 21 inch.
  • Patented built in by-pass device mechanism.
  • Meets ASME/ANSI-PALD safety standards.Saddle Area Min.: 11.4 inch x 11.4 inch.
Check Stock

MCMASKE #2-56#4-40#6-32#8-32#10-24 1/4 -20 5/16 -18 UNC 304 Stainless Steel Socket Head Cap Screws Assortment Kit

  • They are coarse thread.Screws Thread Diameter: #2,Thread Pitch: 56 Per Inch.
  • #6,Thread Pitch: 32 Per Inch.#8,Thread Pitch: 32 Per InchThread.
  • 304 stainless steel have good chemical resistance and may be mildly magnetic.
  • The assortments contain the following sizes:#2-56x3/16"(20PCS).
  • The #2-56 to 5/16"-18 UNC 304 Stainless Steel Socket Head Cap Screws Kit are includes most common SAE standard sizes so you can easily replace a lost screw.
  • Packed in a plastic box,Easy to install and durable to use.
Check Stock

13pcs Set 1pc Mini Wet Bag + 12pcs Charcoal Bamboo Mama Cloth/ Menstrual Pads/ Reusable Sanitary Pads

  • It is a recommended solution of cloth menstrual pads for your period ..
  • 13PCS/set:4 pieces 7 inch pantyliner for thongs + 3 pieces 8 inch pantyliner + 3 pieces 10 inch regular flow + 2 pieces 16 inch overnight charcoal menstrual pad and 1 piece mini wet bag for the storage of the pad..
  • Size: 1)7 inch: 7 inch X 3.5 inch (without wings). 2)8 inch: 8 inch X 2.5 inch (without wings).3)10 inch:10 inch x 2.5 inch (without wing). 4)16 inch:16 inch X 7 inch (without wings). 5)Mini wet bag: 18 X 14 cm, approx 7 inch X 5.5 inch , holds up to 4 to 5 10 inch cloth pads..
  • Composition: 1)7 inch and 8 inch pads:comprised of 3 layers,It is equivalent to a light flow or panty liner absorbency pad. 2)10 inch pads:comprised of 4 layers,It is equivalent to a regular flow absorbency pad. 3)16 inch pads:comprised of 4 layers,It is equivalent to a overnight or post partum absorbency pad..
  • The wet bag also can be used to store baby’s dirty bibs, hankies cloth wipes etc..
Check Stock

Neiko 02446A 1/2\ Drive Master Impact Socket Set, 35 Piece Deep Socket Assortment | Standard SAE (Inch) and Metric Sizes | Includes Ratchet Handle and Extension Bars | Cr-V Steel

  • ...ur tool collection at your automotive shop..
  • [CONVENIENT]: This automotive tool set utilizes high contrast laser etched markings on all pieces for the easy identification of sizes to keep you working at home or the garage on your car or vehicle..
  • [INCLUDES]: This complete set comes with the following pieces: (28) 1/2-inch drive sockets SAE: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1-inch, 1-1/16-inch, 1-1/8-inch, 1-1/4-inch METRIC: 10, 11, 12, 13, 14, 15, 17, 19, 21, 22, 24, 27, 30, 32mm, (3) 1/2-inch drive extension bars: 3, 5, 10-inch, (1) 1/2-inch drive 10-inch quick-release ratchet handle, (1) 1/2-inch drive impact universal joint, (1) 1/2 to 3/8-inch drive impact reducer, (1) 3/8 to 1/2-inch drive impact adapter..
Check Stock