Best 2 Inch J bolts

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

CTA Tools 9030 Fluted Screw Extractor Set 5-Piece

  • Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
  • Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
  • Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.
Check Stock

Signature Fitness SF-3 1,500 Pound Capacity 3” x 3” Power Cage Squat Rack Includes J-Hooks and Safety Straps Other Optional Accessories Red

  • Dimensions: 83.46" Height, 51.18" Width, 38.78" Depth.
  • Fully adjustable J-Hook and Safety Strap position - 47 vertical holes and "westside" spacing on bottom half of each upright pole allowing for the....
  • Built with 3"x3" 11-gauge steel - maximum stability and durability, holds up to 1,500lbs.
  • Includes multi-grip pull up bar along with bolts and instructions to bolt rack into the ground or floor.
  • Includes UHMW-coated J-Hooks and safety straps - 200 dollar value, free.
  • many additional accessories available for purchase.
Check Stock

Yes4All J-Hooks Barbell Holder for Power Rack - J Hook Weight Rack / Fitness Racks J Hook - Fit 2x2 inch Square Tube Pair

  • FIT MOST 2-INCH X 2-INCH POWER RACKS (BUT NOT ALL – PLEASE CHECK YOUR RACK DIMENSIONS BEFORE PURCHASING TO AVOID ANY UNWANTED RETURN): Yes4All 2x2"....
  • 6MM THICK STEEL CONSTRUCTION: Constructed of 6mm thick steel plate and covered with black paint coating finish, our Power Rack J-Hook stands for years....
  • HEAVY CAPACITY LOAD: Due to the strong construction, each J-Hook can withstand 500lbs, for the total weight capacity of the two Hooks up to 1000 lbs.....
  • 8MM THICK RUBBER PAD INCLUDED: The J-Hook is fully equipped with a thick padded rubber layer to reduce noise during your workout session and protect....
  • EASY HEIGHT ADJUSTMENT: Yes4All J-Hook comes with 1-inch bar to lock on and off the rack for height adjustment in a breeze, while the shortened design....
Check Stock

CyclingDeal Compatible with WTB KOM i25 Mountain Bike Novatec Boost Hubs Ikon TR Skinwall Tires Wheelset 11s 29'

  • Rim: WTB KOM LIGHT i25 Disc Brake only Black Tubeless Compatible System. Wheel Size: 29". Inner Width: 25 mm. Spokes: 32 Stainless Steel.
  • Type: Disc 6 bolts. Material: Alloy. Front Hubs: Novatec Boost Hub D791SB-B15, 32H x 14G, weight 153g, Alloy Disc J-Hook, 2 Sealed bearing, M15 x 110mm, P.C.D 58mm, Offset 7.2mm.
  • Rear Hub: Novatec Boost Hub D462SB-SL-B12, 32H x 14G, weight 330g, Alloy Disc J-Hook, 4 Sealed bearing, M12 x 148mm, P.C.D 58mm, Offset 7.5mm, 5 Pawls, 9 10 11 Speed compatible. Tire: IKON Foldable Skinwall 29" x 2.2.
  • Ikon TR Skinwall: Tyre TPI: 60. Tyre PSI: 35-60. Inner Tube: FV48 Tubes.
  • Weight: 3720g/set = 8.2ibs0 Package: Front and Rear Wheels with Tyres, Tubes, and Hubs. Warranty: One Year.
Check Stock

Nidec AST165 1.65 Horsepower 56J C-Flange Replacement Swimming Pool Pump Motor

  • Replacement 1.65 Total Horsepower (THP) swimming pool pump motor.
  • Standard 56J-Frame, C-Flange motor with threaded shaft.
  • Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
  • Designed to replace a 1.5-HP Up-Rated or 1-HP Full-Rated motor and compatible with 115/230 volts.
  • Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.
Check Stock

QFX J-114U Portable Radio Shortwave World Receiver (AM/FM/SW 1-9) World Receiver with Dual 2' Speakers, Headphone Output, USB/SD Inputs

  • Explosive Sound: Don’t let the 2-inch speaker size fool you! The QFX J-114U is equipped with two 2-inch speakers that provide you with impeccable sound quality. You will also be able to customize and optimize the sound by utilizing the world receiver..
  • Great reception: Signal reception is the single most important feature for a portable radio. The QFX J-114U features a telescopic antenna for increased range and signal so you never have to worry about being without reception while listening to your favorite station. With many radio bands supported (AM, FM, SW1-9) you will have a plethora of listening options!.
  • Portable: The QFX J-114U is a convenient gadget you can easily transport with you anywhere you go. Equipped with a swivel handle and weighing in at under 3lbs you can easily carry the QFX J-114U with you..
  • Bluetooth and Multiple Inputs Supported: The QFX J-114U is equipped with all of your input needs. You will have USB/SD Card Ports at your disposal as well as headphone output to maximize which tunes you listen to..
  • Recording Capabilities: The QFX J-114U is equipped with USB/SD recording capabilities. You can utilize this feature by inserting a USB or SD Card into the device, then press the “REC/DEL” button to start recording. The REC/MP....
Check Stock

Del Ozone MCD-50U-13 MCD-50 High Output CD Spa Ozone Generator

  • Dimension: 8.6 Inch Height x 6.1 Inch Width x 2.8 Inch Depth.
Check Stock

3/4\ J-Bolt with Plate J Bolt Hinges for Large Heavy Driveway Gates, Steel, Iron, Wood or Aluminum Mounts on a 4\ X 4\ Post

  • Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated.
  • Hinge has a 3/8" X 11/2" welded plate with 2 holes to attach to an existing structure.
  • This hinge will swing a full 180 degree if installed without a stop.
  • The J-Bolt arm which attaches to the gate frame and is adjustible. Price is per Pair.
  • Threaded Bolt 7" Over all lenght,Sold in Pairs,Includes Grease fitting,Will fit on a 4" X 4" Post.
Check Stock