Best 2 Table 8 Spindle

Grizzly G0704 Drill Mill with Stand

Spindle speed: Continuously variable between 100 and 2,500 rpm with belt-driven spindle.
Table size: 16 inches wide x 3-3/4 inches deep, 110lbs.
Column angle: tilts from -45 degrees to +45 degrees.
Motor: 500 watt (0.67hp) brushless DC, operates from standard 120v AC outlet.
Overall size: 30 inches high x 20 inches deep x 20 inches wide, 110 lbs.

Spindle speed: Continuously variable between 100 and 2,500 rpm with belt-driven spindle.
Table size: 16 inches wide x 3-3/4 inches deep, 110lbs.
Column angle: tilts from -45 degrees to +45 degrees.
Motor: 500 watt (0.67hp) brushless DC, operates from standard 120v AC outlet.
Overall size: 30 inches high x 20 inches deep x 20 inches wide, 110 lbs.

Trailer Bearing Repair Kit for 1-3/8 to 1-1/16 Inch Tapered #84 Spindle (3.5k capacity) - Includes E-Z Lube Cap with Plug 1 Set Included.
L-68149 inner bearing- (1-3/8" inside dimension) / L-44649 outer bearing- (1-1/16" inside dimension).
L-68111 inner race- (2.362" outside dimension) / L-44610 outer race- (1.98" outside dimension).
Grease seal - (2.56" O.D - 1.72" I.D) EZ Lube Dust cap - (1.98" outside dimension).
This kit is for axles with a 1-3/8" to 1-1/16" tapered #84 spindle..

Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.

Features a 5-amp induction motor, a 10-inch swing, and a 2-inch spindle travel.
Adjust the mechanical variable speed anywhere from 530 to 3100 RPM.
Digital speed readout displays current RPM of the machine for maximum precision.
Includes a laser, adjustable depth stop, beveling 8 by 7.5-inch work table, 1/2-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty.
Measures in at 13.2 by 19.3 by 33.9 inches in size with a weight of 57 pounds.

Outer spindle acts on the clamping jaws – inner spindle applies pressure to the front edge.
Two large non-slip, opposing, gentle jaws for positive grip.
Large swivel pressure plate with protective plastic cap.
Lightweight, corrosion-resistant aluminum housing designed for high static stress load.

Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM.
Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums..

POWERFUL 6.2A MOTOR: Equipped with a powerful 6.2A induction motor (most 12-IN drill press motors are only 5A), provide you constant power to drill through all kinds of material.
PROFESSIONAL DRILL PRESS: 1/32" - 5/8" Keyed chuck, 12" swing, 3-1/8" spindle travel, and overall height of 39" (2" high than other 12" drill press).
VARIABLE SPEED: You can easily adjust the speed from 580 to 3200 RPM, satisfying your drill needs from wood to all kinds of metal. Digital speed readout helps precisely control the speed.
FULLY ADJUSTABLE WORK TABLE: The flat work table can rotate 360° and bevel 45° left or right.
EXTRA SUPPORT: This drill press equips with a Class IIIA 2.5mW laser, work light, emergency stop switch, and no voltage release switch, help you work precisely and safely.