Best 2 Wire Oxygen Sensor

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

Dianrui 2Pcs Stainless Steel Mounting Fitting with Holes including 2pcs Brass Gasket,35mm Mounting Fitting Accessories Straight Thread Connector Plug K1-035-1

  • These extensions are great for custom exhaust, moving the O2 sensor placement, or needing more slack for the O2 sensor wiring. These harnesses are a direct plug and play extension for the oxygen sensor and requires no splicing..
  • Compatible with Dodge Jeep Chrysler SRT RAM 1500 Charger.
  • O2 Sensors are not included, these are extension harnesses to allow a longer reach of the existing O2 sensor harness..
  • Each purchase will receive (4) Plug-and-Play oxygen sensor extension harnesses. (2) 24" and (2) 12" extensions are included..
  • Condition:100% new and tested before shipment..
Check Stock

Walker Products 350-34092 Oxygen Sensor Original Equipment Replacement O2 Sensor 1 Pack

  • Walker Products Oxygen Sensor Program is the Industry Leading OEM and Aftermarket Oxygen Sensor ( O2 Sensor ) Program.
  • Walker O2 Sensor is Manufactured to meet and exceed OE specifications.
  • increase fuel efficiency, decrease emissions,....
  • Backed by Walker Products buyer protection for worry free installation and performance.
  • Fitment: 1995-2019 Toyota Camry, Toyota Corolla, Lexus ES300, Lexus GS300, Lexus LS400, Lexus SC400, Toyota Solara.
  • Replacement: 234-4603, 15087 Oxygen Sensor.
Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool

  • PackageIncludes 2 7/8" 3/8 Inch Drive Vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket.
  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Usage Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Upstream Air Fuel Ratio Oxygen Sensor Compatible for 2013-2018 Nissan Altima 2.5L Federal Emission 2015-19 Versa Note 1.6L

  • Pre-Cat / Front Oxygen Sensor Compatible for 2013-2017 Nissan Altima 2.5L L4 2015-2019 Versa / Versa Note 1.6L.
  • Note: For 2.5L Altima Except California Emission Vehicles, Original Connector is Brown.
  • Parts No.: 22693-3TY0A, 211500-7590, 22693-3TY0B, 22693-VZ90A, 234-9133.
Check Stock

Apeixoto 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set 1/2in and 3/8in Sq Drive AP1060K

  • Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum swithces and fuel injections. These tools can be used most vehicles..
  • Packages: There are 10 pieces removers and sockets in the red case. The whole tool set comes in a solid red case which will protect the tools well during shpping and let you keep the tools well after usage..
  • Specifications: The specification for these 10 oxygen sensor sockets are : 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8 inch x 50mm, 3/8 inch dr x 7/8 inch x 6PT x 80mm, 3/8 inch dr x 7/8 inch x 6PT x 90mm, 3/8 inch dr x 7/8 inch x 30mm, and 3/8 inch dr x 1 inch and 1-1/6 inch x 74mm.
  • Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
  • Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..
Check Stock

Oxygen Sensor Bosch 15703 Replacement Upstream or Downstream for 2000-2003 Chevy Corvette Isuzu Express 1500 2500 3500 GMC Sierra Savana 1500 2500 3500

  • Fitments: The 15703 oxygen sensor is fit for the upstream or downstream poison sensor on 2000-2003 Chevrolet Corvette Isuzu Express 1500 2500 3500 GMC....
  • Replace OE #: The oxygen sensor is manufactured with formal OE standard. The interchange # are 15703 21006 234-4063 AFS75. Please double check if your....
  • Size: The overall size for the oxygen sensor is 13.78 inches. Please check if this is long enough or can be used on your vehicle..
  • Solid Quality: The Apeixto Oxygen sensor is manufactured with the double layers, aluminum oxide trap layer, PTFE filter and stainless steel housing.....
  • Warranty: 1-YEAR / 365-DAYS UNLIMITED MILEAGE WARRANTY..
Check Stock

ITEQ 7/8 Inch (22 mm) 6-Point by 1/2 Inch Drive Offset Oxygen Sensor Socket with Wide Side Cutout for Preventing Damage to Wires

  • Perfect tool for removing, inspecting, replacing and installing heated and non-heated oxygen sensors on most vehicles with computer-controlled engines.
  • The 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 1/2” drive and 7/8” ends can be used with both ratchet and torque wrench.
  • The oxygen sensor socket's special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Made of high-quality Chrome vanadium steel for extra strength and durability.
  • Suitable for oxygen sensors found on most modern vehicles.
Check Stock

8MILELAKE 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • 10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome.
  • Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2"".
  • Drive Ratchet Depending On The Size of The Socket 10Pc Oxygen Sensor & Diesel Injection Oil.
  • Pressure Unit Vacuum Switches Socket Set Heat Treated Chrome Vanadium & Chrome Molybdenu.
Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

  • REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
  • Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes.
  • Remove and install parts on most domestic and some international vehicles.
  • USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (driver tools not included).
  • Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included).
  • BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
  • Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion.
  • CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8” x 50mm, 3/8 inch dr x 7/8” x 6PT x 80mm, 3/8 inch dr x 7/8” x ....
Check Stock