FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm
The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..
Ultra-Small RPi GPIO Terminal Block Breakout Board Module, for Raspberry Pi
The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W..
Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper..
FR-4 fiber glass PCB, dual copper layers..
2x20 positions header connect to Raspberry Pi board..
Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board)..
Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)
This is Gateron PCB Mount Screw In Crystal Stabilizer，.
Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
If your keyboard is 96 or 104 108 layout,need to buy 2 set.
This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..
EPOMAKER Theory TH68 Pro 65% 67 Keys RGB Hot Swappable Programmable Bluetooth 5.0/2.4Ghz Wireless/USB-C Wired Triple Modes Mechanical Gaming Keyboard with Rotary Knob for Win/Mac (Gateron Pro Yellow)
【Fully Upgraded Software for More Possibilities】The EPOMAKER TH68 PRO mechanical keyboard features the upgraded EPOMAKER software and chip that can automatically check Win/Mac mode, battery status (FN+B), keyboard mode and programmable Fn layers (FN+BACKSPACE). It also comes with a range of standard RGB effects, which you can easily switch between using simple shortcuts..
【Bluetooth 5.0/2.4GHz/Type-C Wired Triple Modes Available】EPOMAKER Theory TH68 65% mechanical keyboard features multi-modes connection to provide free switch between different devices. No more plug in and out processes. Bluetooth 5.0 and 2.4GHz offer fast and stable transmission without latency while included Type-C cable provides solid connection as a backup when the battery is out. It’s compatible with Mac/Win/Android system. It is N-key rollover in all modes, limitless as expected.
【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】TH68 keyboard is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mecha....
Asus Intel 8th Gen DDR4 HDMI VGA Micro ATX Motherboards (Prime H310M-E R2.0)
Designed exclusively for 8th generation Intel Core processors to maximize connectivity and speed with an integrated M.2 slot.
5x Protection III Hardware-level safeguards provide component longevity and reliability.
Fan pert delivers advanced fan controls for dynamic cooling.
Asus optimized improves memory stability and performance by improving trace isolation between PCB layers to maintain signal integrity even at higher frequencies.
Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board
MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
