NOYITO CD74HC4067 CMOS 16-Channel Digital Analog Multiplexer Breakout Module
Function: Use 16 ADCs to collect 16 analog signals.003cbr003e.
Use the CD74HC4067 16-channel analog signal switch.
Analog signal input: C0-C15 16 channels.003cbr003e.
This is a breakout board for the very handy 16-Channel Analog / Digital Multiplexer / Demultiplexer CD74HC4067.003cbr003e.
This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction.003cbr003e.
HiLetgo CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino
Function: Use 16 ADCs to collect 16 analog signals..
Use the CD74HC4067 16-channel analog signal switch.
Analog signal input: C0-C15 16 channels..
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction..
Evertech 4 Channel Analog Color Quad Processor CCTV Security Camera System Video Splitter
Compatible with all Traditional ANALOG Cameras, NOT Compatible with 720P/1080P AHD / TVI / CVI / HD-SDI Cameras.
This is 4 Channel Digital Color Quad Processor with Remote Control and a standard 12V DC power supply adapter. It is useful in video surveillance systems that have complex monitor display requirements. Great for those who only wants to view their camera and do not need to record..
Multi display mode : Full screen, electronic amplification, 4 picture, Picture in Picture, Auto switch display mode.
NTSC: 720x480. The image quality of 8 camera multiplexer is adjustable, and it has digital zoom function, auto sequential switching, and multi channel freezing function and so on.
Rear View Safety RVS-770613-213 Backup Camera System with Quick Connect Kit for Fifth Wheels, Trailers, Travel Trailers and Semi-Trucks
7 INCH DIGITAL LED DISPLAY - with swivel head mount and three channel multiplexer to connect an additional two cameras.
130 DEGREE VIEWING ANGLE - backup camera provides super wide view to capture complete view of the road.
EXCELLENT NIGHT VISION - 18 infra-red lights provide a perfect view at night - enable automatically when it's dark.
COMPLETELY WATERPROOF - backup camera and all cabling is completely waterproof with an IP69K rating.
QUICK CONNECT KIT - for easy mounting on trailers - cabling runs 26 feet through tow vehicle and 66 feet through trailer with 12 foot pigtail that runs between the vehicles - easily connect and disconnect trailer with camera installed.
AllAboutAdapters Composite S-Video to Component Video RGB Sync On Green Converter
Dual-purpose composite RCA video and S-video to YUV/RGB converter with selectable component video output and 15Khz RGsB output. Selectable composite video/s-video input via manual push button..
Selectable video output format between 15Khz RGsB and interlaced YCbCr. Converting standard composite video or S-Video signal into interlaced component YCbCr video output at 480i/576i for TV or projector display..
Converting standard composite video or S-Video signal into RGB at 15.625Khz/50Hz or 15.734Khz/60Hz ouput for RGB monitor display. Restores analog video feed to component/RGB type video with all the vibrant and rich color information accurately presented again..
Crisp and clean output with full color depth via component/RGB format. Great video adapter for connecting CCTV video surveillance camera system or DVR, quad processor or video multiplexer to component video or RGB video for large screen display..
Premium SOG video sync adapter for monitors requiring RGB sync on green type for the input. Automatic video input system detection for NTSC/PAL/SECAM devices. Supports worldwide video system including NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N and SECAM..
Arducam 16MP Autofocus Quad-Camera Kit for Raspberry Pi, 16MP IMX519 Autofocus Synchronized Raspberry Pi Camera, Compatible with Nvidia Jetson Nano/Xavier NX
...rocessing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Raspberry Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware..
Please note: The cameras in the set are specifically designed to share clocks with the HAT for frame-level synchronization.
however, they cannot be used as standard camera modules on their own. ABS Case for raspberry pi camera: B09TNG4V55/B09TKYXZFG..
Kiro&Seeu 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board CD74HC4067 Precise Module Compatible with Ar-duino DIY D74HC4067-16CH-2P
Use the CD74HC4067 16-channel analog signal switch.
Analog signal input: C0-C15 16 channels..
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction..
To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!.
Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For Arduino
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)..
It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction..
To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!.
Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prev....
