TecUnite 20 Pieces 3-Pin Extension Cable Cord Female to Male Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(4 Sizes)
Servo extension cord sizes: have 4 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch and 50 cm/ 19.7 inch, each length has 5 pieces servo extension cords.
Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
Package includes: 20 pieces of female to male servo extension cable wires with 4 different lengths, enough for you to use on different occasions.
Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs
【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
FURITEK Iguana 20A/40A Brushed ESC for AXIAL SCX24 with Bluetooth Combo
The FURITEK IGUANA esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers..
Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response..
And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps..
The difference between this IGUANA esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the IGUANA does not have. The IGUANA also has smaller BEC than the TEGU..
- Support sensorless brushless DC and brushed DC motor (config via app, default is brushed).
☆【QUALITY METAL GEAR】：Using high-quality hard alloy materials, equipped with metal gears, the RC gear servo kit has high precision and is not easy to jam.
☆【HIGH-STRENGTH ALUMINUM FRAME】：Using high-quality all-aluminum frame, and after precision processing, the RC gear servo kit is strong and not easily deformed.
☆【HIGH OPERATING EFFECIENCY】：The RC gear servo kit has high operating efficiency, low noise, low power consumption, and is easy to install and disassemble.
☆【WITHSTAND HIGHER LOADS】：RC gear servo can withstand higher loads and ensure the normal operation of the server, effectively improving the performance of RC cars.
☆【5 SIZE SERVO ARMS】：There are 5 different servo arms in the RC gear servo kit package, which can meet your different needs, suitable for 1/10 1/12 remote control car RC off-road vehicle.
BETU 2Set 25KG (7.4V/2S) High Torque RC Digital Servo，Waterproof Full Metal Gear Servo with 25T Servo Horn（180°）
【Super Large Torque 25kg Servo】Super Large Torque， Maximum torque is up to 25 kg/cm (280.5 oz/in)@7.4V(2s). Very strong, excellent range of motion, and includes a 25T metal horn..
【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arms.
【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
【Metal Servo Servo Standard Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
Tecunite 20 Pieces 3-pin Servo Extension Cable Wire Cord Female to Male RC Servo Extension Cord Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(5 Sizes)
Servo extension cord sizes: have 5 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 4 pieces servo extension cords.
Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
Package includes: 20 pieces of female to male servo extension cable wires with 5 different lengths, enough for you to use on different occasions.
MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard
...tep that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User method, please check the links from the following description).
Fielect Shaft Coupling 12mm to 15mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor
【Dimension】 - Shaft usage:12mm to 15mm/0.47" to 0.59".
【Material】 -The coupling is made of aluminum alloy, the surface is oxidized, and the type isthread holding tight.
【Features】- Connector is wear-resistant, high hardness, good responsiveness, super elastic torque can absorb vibration, suitable for large torque transmission.
【Function】 -The Flexible Coupler Joint transmits torque while suppressing system vibration and adapting to misalignment to protect other components from damage.
【Application】 -The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
LAFEINA Aluminum Alloy 25T Adjustable Damping Servo Arm for 1/10 RC Crawler Car Traxxas TRX4 TRX6 Upgrade Parts (Titanium)
25 Teeth Spline Steering Arm is CNC machined, and Spline Steering Arm Server Rocker makes it precise in size and stable in performance..
25 Teeth Spline Steering Arm is compatible with Futaba Savox Emax HSP Power HD Xcore & Other popular prand servos motor, and 25T Servo Horn does not fit for Hitec and JR Servos..
25 Teeth Spline Steering Arm is a great replacement part, and 25T Servo Horn fits for 1/8 1/10 RC Car Crawler..
25 Teeth Spline Steering Arm includes a distance from hole center to hole center: 15mm, 18mm, and 25T Servo Horn 25 Teeth Spline Steering Arm is made of Aluminum alloy, strong and durable..
Package of 25 Teeth Spline Steering Arm includes: 1 x 25T Metal Servo Arm, Red, Spline Steering Arm Server Rocker, 25T Servo Horn 1 x 25T Metal Servo Arm, Black, 25T Servo Horn, 25T Servo Horn 25 Teeth Spline Steering Arm.
FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More
BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..
