Best 20mm Nozzle

Hakka Sausage Stuffer 7 Lb/3 L Stainless Steel Vertical Meat Filler color Orange

  • Metal gears be used more quick and smoothly.
  • All parts that contact food directly are reach up SGS food hygiene standard.
  • 4 different plastic nozzle: 1/2" inch(10 mm), 5/8" inch(20 mm), 1-1/4" inch(30 mm) and 1-2/3" inch(40 mm).
Check Stock

homenote 10 Pack Brass Misting Nozzles for Outdoor Misting Cooling System, Suit for 1/4” Tubing

  • Quantity: 40PCS Brass Misting Nozzles For Outdoor Cooling System.
  • The misting nozzle is made of a sturdy brass with stainless steel orifice.
  • Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min..
  • Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle..
Check Stock

Megaforce

  • 1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
  • 1x True Micrometer Air Regulator with Gauge.
  • This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting..
  • It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications.
  • Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
  • Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..
Check Stock

BIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts

  • ⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
  • ⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
  • ⭐【Package Including】: 2 * 4mm PTFE Tube.
  • Compatible with 100K NTC 3950 thermistors.
  • Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
  • ⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
  • ⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..
Check Stock

2 Pack Travel Bidet Bottle,Upside Down Peri Bottle for Postpartum Care,Portable Handheld 300ml Bidet Sprayer,Travel Bag Pointed Nozzle for Personal Hygiene Care,Perineal Recovery,Outdoor-Green Bottle

  • MADE FOR BLAUX PORTABLE BIDET FOR TRAVEL - Experience a gentler, more complete clean with our replacement nozzles, designed for Blaux handheld bidet sprayer for toilet (not included). These premium portable bidet for women and men nozzles can be adjusted to face forwards or backwards and are super easy to wash and maintain. Experience superior personal cleanliness and reduce your toilet paper consumption with hand held toilet bidet replacement nozzles from Blaux..
  • HAND BIDET TRAVEL NOZZLE TURNS 180° FOR ERGONOMIC USE - The Blaux bidet travel sprayer is like no other bidet bottle or diaper sprayer. Each replacement toilet shower nozzle is designed to maneuver 180 degrees, to ensure the maximum amount of surface area is covered for a more complete clean. Adjust the handheld personal bidet's nozzle manually to face forwards or backwards and make cleaning your undercarriage a comfortable and easy experience..
  • EASY TO INSTALL REPLACEMENT NOZZLE FOR BLAUX PERSONAL BIDET - In a matter of minutes, you can have a bidet shower with warm or cold water set up and ready to go! To install, simply slide the existing bidet spray attachment off and replace it with a new electric portable bidet nozzle. It's that easy!.
  • PACK OF TWO BLAUX BIDET PORTABLE REPLACEMENT N....
Check Stock

uxcell 1/4PT Thread Dia Adjustable Magnetic Base Coolant Oil Water Hose Pipe

  • Product Name : Magnetic Base Coolant Pipe.
  • Connector Diamter : 8mm / 0.31″ (Approx.).
  • Flat Nozzle Width : 20mm / 0.8″ (Approx.).
  • Package Content : 1 x Magnetic Base Coolant Pipe.
Check Stock

HATCHBOX ABS 3D Printer Filament Dimensional Accuracy +/- 0.03 mm 1 kg Spool 1.75 mm Yellow

  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended.
  • Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".
Check Stock

HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 3.00 mm, Black

  • 3.00mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended.
  • Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".
Check Stock

HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended.
  • Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".
Check Stock

Weldy 1600W Professional Hot Air Equipment Hot Blast Torch Overlap Air Welding Gun Welder Pistol Tool Hot Air Gun 120 Voltage and flat nozzle

  • WELDY energy HT1600 is a compact and robust hot air hand tool for an endless range of professional applications. This hot-air-tool convinces with its....
  • Accessories:Wide slot nozzle 20 mm,Wide slot nozzle 40 mm,Silicone pressure roller 40 mm.
  • (Weldy AG Switzerland) All Weldy products are manufactured according to Swiss technology and engineering and its proximity to the key markets is a....
  • One year warranty (not include heat element). Operation Notice:Knob the temperature to zero point after use,cold airing a few minutes to cool down....
  • Industry standard and reliable ,Adjustable hot air from 100f-1290f / 40 °C to 700 °C ,Long lifetime ,Heating tube protection for more security.
Check Stock