Le Lematec Sandblaster Long Nozzle Attachment, Sandblasting Nozzle Tip for Portable Sandblaster, Sandblasting Accessory for Spot Blasting
Heavy-duty Sandblasting Long Nozzle made of steel and aluminium that is very suitable for tough working environments and high-speed sandblasting operations..
Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste..
Clean hard-to-reach areas, tight spaces, and small and complex objects easily with our long nozzle sandblaster tip (sandblaster gun sold separately). Easy to install and replace, switch from a short nozzle to this long nozzle..
Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm.
Compatible with all Le Lematec sandblasters and support various media. Refer to our media guide for a complete list of abrasives and sizes..
YingEnter Professional Plastic Hair Dryer Nozzle Diffuser Hair Dryer Nozzle Comb Attachment Concentrator Replacement Blow Flat Hairdressing Salon Styling Tools,Type A
[Package]: You'll get 2 pcs Black Plastic Hair Dryer Narrow Concentrator Nozzle, One size: 50x60x68 mm/1.96x2.44x2.67 inch The other size: 50x74x75 mm/1.96x2.91x2.95 inch.
[High temperature resistant nylon material]: Our hair Dryer Narrow Concentrator Nozzle is made of high temperature resistant nylon material, high temperature, deformation. It can work well under 150 degrees for a short time.
[Good experience]: With the influence of the nozzles, it can help the air flow gather and disperse, reduce impact for your hair. If your hair dryer diameter below 4.5cm, please use with sponge rubber pad together. New black high-temperature resistant plastic black Hair Dryer Nozzle can make your hair drier lighter, more durable, and more powerful..
[Easy install]: Take off the old air nozzle and put the new air nozzle on the air outlet of the hair dryer, you'll get it.
[warm Tip]: The following three situations cannot be used: 1. Diameter is less than 42mm ,or more than 46mm 2.Metal material hair dryer cannot use 3.Foadable hair dryer cannot use it.
The nozzle is made of quality brass material, corrosion resistant and durable, long service lifespan, beautiful brass golden color, high-grade looking..
This is a small to large injector nozzle generates a lively full water pattern and offers oxygen enrichment. With injector effect, water and air are suctioned in, mixed intensively and accelerated into the air by the injector jet as an impressive soft flowing fountain..
Applicable in the courtyard, garden, kitchen garden and another small area of agricultural spray irrigation.
lawn, green belts, gardens and another small area of gardening sprinkler.
sprinkler irrigation and industry, and another small area of cool roofs..
The nozzle can be adjusted towards different directions. Fan-shaped fountain nozzle to form a fan-shaped water column, which is pretty attractive when illuminated by underwater colorful lights at night..
WINSINN 50mm 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)
✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place..
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm.
✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products..
Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)
[Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
[High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
[High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
[Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....
MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle
100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
AKISEKTR HVLP Spray Gun Set Newest Automotive Spray Paint Gun with Pressure Gauge 3 Nozzles 1.4/1.7/2mm Nozzle and 600cc Cups Clear Spray Cup with Scale for Car Primer Furniture Surface Spraying
...oy, The latest style of spray cup is transparent with a scale, which can help you clearly see the amount left in the spray cup, lightweight and compact for easy to carry. HVLP technology helps to reduce the waste of residual material in the color cup.
The package includes: 1 x Spray Gun, 1 x Pressure gauge,1 x 1.4mm Nozzle, 1 x 1.7mm Nozzle, 1 x 2.0mm Nozzle, 1 X 600cc Cup, 1 X Brush, 1 X Upper Pot Filter,1 X Cup Sealing Plugs,1 X Spanner, 1 X Disposable Lids,1x Instruction Manual..
Adjustable: 1.4/1.7/2.0mm 3 size nozzles, easier to control. Adjust the spray cap to control the nozzle direction 360° direction controllable. Air spray gun 1.4mm tip with replaceable 1.7mm 2.0mm nozzle needle cap, wrenchr, nut, filter, connector and brush, which can fully meet your requirements.
Our Advantages: This spray gun makes the spraying softer easily controlled and less overspray. Ideal for spraying basecoats, clearcoats and other high viscosity coatings also suitable for domestic and industrial primer, topcoat and detailing for automotive industry, equipment and furniture paint applications..
Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle
ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
