Vincita Imitation Sheepskin Bicycle Seat Cover & Gel Padding - for Wide Seat Spin Bike, Cruiser Exerciser - Imitation Wool/Fleece/Fur Cushion Cover & Removable Gel Insert (Dark Grey, Extra Large)
[MADE FROM IMITATION SHEEPSKIN] - Available in white and black colors. The cushioned cover also keeps your bike's seat protected from worn out..
[COMFORTABLE SEAT COVER WITH GEL PADDING] - to reduce riding pain and fatique . The saddle cover is washable by hand and durable. The gel insert is removable, please remove the gel padding before washing..
[WIDER SIZES TO FIT LARGE BIKE SEATS] - including cruiser bikes, stationary bikes , fan bikes and exercise bikes, etc. Available in 2 sizes: Large size (10.2"x10.2") and Extra Large size (12"x12")..
[EASY TO INSTALL ] - The cushion bike seat cover has drawstring around the edge on the bottom and cinch closing at the end. It is adjustable and can be tighten for exact fitting..
[ ENGINEERED TO ENDURE ] - The cover is made of durable fabric that can last through all your biking conditions..
Vincita Rack Mount Seatpost Clamp - for Bike Without Rear Rack Threaded Hole Fixation - Suitable with Seatpost Diameter 31.8 mm (Seatpost Tube 34.9 mm) - Lightweight -Mountain, Road, Folding Bicycle.
[ SOLUTION FOR BIKE WITHOUT REAR RACK THREADED EYELETS ] : You can now mount a rear carrier with any bikes with Vincita seatpost clamp with rack mounts. It adds two M5 rear threaded eyelets to the seatpost. These eyelets can be fixation point for bike rear carrier..
[ MEASURE DIAMETER OF SEATPOST (NOT SEAT TUBE) BEFORE PURCHASE] : Our bike seatpost adapter is available in 2 seatpost sizes. Seatpost Diameter 27.2 mm ( Seatpost Tube 31.8 mm) and Seatpost Diameter 31.8 mm ( Seatpost Tube 34.9 mm) . *** Please measure your seatpost and seat tube before purchasing***.
[ EASY INSTALLATION ] : Simply use an allen wrench to replace your old seatpost clamp with this bicycle clamp. There are three mounting screws included..
[ LIGHTWEIGHT, HEAVY-DUTY ] : The seatpost collar only weights less than 50 grams. But once installed, it will tighten securely around your seatpost without slipping..
[ ENGINEERED TO ENDURE ] : This clamps are made of alloy and have been engineered for durability. It can take the daily conditions of biking..
Topbuti Bike Seatpost 350mm 25.4mm Bike Seat Post Aluminum Alloy Bicycle Seat Post Mountain Bike Seatpost for BMX MTB Road Bike
Note: Random delivery, you will got 1 piece bicycle seatpost with tick marks printed on the surface, or got 1 pieces seatpost without tick marks printed on the surface, if you mind, please purchasing carefully..
Note: Bicycle seatpost size is 350mm x 25.4mm. Please measure the actual required diameter before purchasing. package is not include the saddle clamp, thank you. bicycle seat post diameter is about 25.4mm/ 1 inch, and the thickness of the tube is about 2mm/ 0.08 inch..
Material: The seat pole for a bicycle is made of aluminum alloy, durable and polished anodized finish, stronger inside design will improve the load-bearing of seat post..
Application: The saddle pole bike seatpost seat tube is used for most old style bike, and the bike saddle with clamp. such as mountain road bike, fixed gear Bicycle, downhill bikes, track bikes, MTB, BMX, etc..
Package Include: 1 piece bike seat post, black color, saddle clamp is not include. easy to install, and there is a safe line mark on the aluminum alloy pole seat tube, please insert at least above the minimum safety line..
SOSSUSVLEI Bike Storage Rack, Floor Bike Parking Storage Stand, Thru Axle Aluminum Alloy Bicycle Stand for Indoor & Outdoor Parking, Garage Parking, and Repair, Max Capacity 44lbs (Black)
【Unique & Stylish Tree-Fork Design】 Inspired by nature, this tree-fork designated bike stand looks stylish and delivers the pursuit of an eco-friendly life. Meanwhile, its unique design takes up small places and provides stable support.
【44lbs Max Weight Capacity】 Enhanced by the aluminum alloy material and tree-fork structure, our bike storage rack features superior durability and stability, thus it can easily bear bicycles of weight up to 44lbs, making it your ideal bike parking tool whether indoors or outdoors.
【Built with Fine Craftsmanship】 With anodized tech, this thru-axle bike stand looks awesome in color, texture, and it endures daily use without corrosion. Each tube of the bike stand was caped with strong plastic caps, protecting your hands or bike from scratches of the sharp metal.
【Easy Assembly, Easy in Use】 Taking just about 2 minutes to assemble: stick the tubes through the holes according to the instructions and the assemble is done. Using it would be much easier, just stick the tube through the axle of your bike, that’s all the work, simple and fast.
【Compatible for Most Thru-Axle Bikes】 The parking tube weighs 0.8 inches in diameter and 11 inches in length, supporting most thru-axle bikes for cyclists. After usage,....
【Size】This bike tire tube fits 700c tires with 35mm to 43mm diameter. So, this tube can fit 700x38c and 700x40c bike tube.
【High Quality】 Our bike inner tubes are made of high quality butyl rubber material. Better air tightness, heat resistance, and durable. Suitable for most of bicycles wheels.
【NOTE】Make sure inner tube match with the size of tire.
Inflate a little air before installment, to avoid crack or damage during installment.
Install the valve correctly, which must be 90° with steel, and the nut must be well locked.
After installment, please check the tube is at the right position between steel and tire, make sure the tubes are not clamped by them.
Then inflate the air according to pressure standard of tire.
SLS3 Top Tube Bike Bag | Bicycle Fuel Aero Frame Bags | Pouch | Triathlon | Stable and Secure Phone Bike Bags | Low Profile Bike Stem Bag
ATTENTION: PLEASE SEE MEASUREMENTS IN THE PICTURES TO SEE IF THIS BIKE BAG IS BIG ENOUGH FOR YOUR NEEDS AND IF THE STRAPS FIT YOUR BIKE FRAME! The main compartment is 8.5" x 2" x 2". It fits SMALL essential items like a cell phone (up to iPhone 6), or a couple of gels. You can also store a C02 inflator and canister..
ULTIMATE STABILITY: We are using two micro-adjust rail systems and secure straps ( extra long for custom fit - 4 inches long - YOU CAN CUSTOM CUT THEM TO FIT YOUR FRAME ) to keep the bag in place (Anti-slip fabric under bag for better stability). The straps are long enough to snug it down tight against the front tube ( front tube straps are 4.5 inches - WILL NOT FIT BIKES WITH SMALL STEMS) and top tube. Your legs don't touch it at all while peddling (please make sure to cut any excess straps)..
EASY TO USE: The setup takes only a few minutes and the zipper is high quality and moves easily. PLEASE NOTE THAT THE UNIT WILL NOT FIT BIKES WITH SMALL STEMS. THE LENGHT OF THE STRIPS SHOULD BE CUSTOM CUT TO FIT YOUR BIKE FRAME!.
ULTIMATE AERODYNAMIC: We Designed this cycling top tube bag with a 15° angle to optimize aerodynamics and reduce drag caused by stem and headset spacers. AGAIN: This is NOT a very big unit - please see measurements..
FAST- DEER Carbon Fiber Seat Post MTB/Road Bicycle Seat Post 27.2/30.9/31.6×350/400mm Weight 160g (400, 30.9)
Ultralight Carbon Seat Post: Made of full 3K T800 carbon fiber — as known as “black gold” in the industry, Light weight, never rust..
Size: Φ31.6 × 350mm (apx. 240g/pc), Total length: 350mm, Tube Length: 325mm, Head Length: 25mm. Strength: maxium of 580lbs.
Setback: 0mm. Adjust tube length of 0 to 320mm..
How to Choose Yours: You need to either check your INTERNAL diameter or check the specs on your original bicycle seatpost or bike..
Adjustable Seatpost Angle: The seat tube angle is controlled by how the bolts are tensioned. You can probably get a pretty steep angle by loosing the rear bolt and tightening the front bolt of our bicycle seat pole. The recommended maximum torgue force would be 7 Nm, or else the cracks may occur..
Wide Application: Suitable for most mountain bikes, road bikes, fixed gear bicycle, downhill bikes, track bikes, MTB, BMX, DH, etc..
Tusk Racing Four 28x10-14 TERRABITE Heavy Duty 8-Ply Radial DOT UTV Tires mounted on Tusk UINTA Beadlock Wheels - For KAWASAKI TERYX 750 800 - 4/137 Bolt Pattern - Includes Lug Nuts (Gun Metal)
2.50-10” AND 2.75-10” DIRT BIKE TIRES AND INNER TUBES - Designed for dirt and pit bikes with 10-inch rims with 2.50-inch front tire widths, and 2.75-inch rear tire widths. They’re the industry standard tires and tubes for most 49cc, 50cc, and 70cc dirt and pit bikes, pocket bikes, and motocross bikes. Several 90cc and 110cc dirt bike models also use this front and rear tire size configuration..
2.50-10” FRONT TIRE AND TUBE WITH AGGRESSIVE TREAD PATTERN - This set includes a 2.50-10” front knobby tire and its complementary inner tube with a heavy-duty TR4 valve stem. The front tires feature a more aggressive tread pattern that enables better handling compared to stock tires..
2.75-10” REAR TIRE AND TUBE MADE WIDER FOR BETTER TRACTION AND HANDLING - This set includes a 2.50-10” rear knobby tire and its complementary inner tube with a heavy-duty TR4 valve stem. The extra thickness improves traction and handling enormously..
EXCELLENT UPGRADE TIRES AND TUBES FOR DIRT BIKES - Upgrade your stock tires and tubes with ones that offer excellent performance all around. See the instant difference in ease of handling, traction, and grip on your CRF50, TTR50 and PW50, JR50, and more!.
IMPORTANT NOTE: This replacement kit is an aftermarket product p....
TPard Carbon Bike Seat Post 27.2/31.6 Ultralight Carbon Fiber Bicycle Seatpost Bike Seat Tube for Mountain Road Bikes MTB BMX
Ultralight Carbon Seat Post: Made of full 3K T800 carbon fiber -- as known as "black gold" in the industry, Light weight, never rust..
Size: Φ27.2 × 350mm (apx. 220g/pc), Total length: 350mm, Tube Length: 325mm, Head Length: 25mm. Strength: maxium of 580lbs.
Setback: 0mm. Adjust tube length of 0 to 320mm..
How to Choose Yours: You need to either check your INTERNAL diameter or check the specs on your original bicycle seatpost or bike..
Adjustable Seatpost Angle: The seat tube angle is controlled by how the bolts are tensioned. You can probably get a pretty steep angle by loosing the rear bolt and tightening the front bolt of our bicycle seat pole. The recommended maximum torgue force would be 7 Nm, or else the cracks may occur..
Wide Application: Suitable for most mountain bikes, road bikes, fixed gear bicycle, downhill bikes, track bikes, MTB, BMX, DH, etc..
Schwarbe Pro One 11653977 Tube Type, 700 x 25C, Clincher, Kevlar Bead, Color: Black
HIGH-END TUBE TYPE: Combines speed and control at the highest level. Pro One is best road bike tire Schwalbe has ever developed..
The Tube Type tire is specially made for use with a tube and cannot be used tubeless. All Pro One road bike tires are clearly marked with additional labels "TLE“ for Tubeless Easy or "TUBE ONLY“..