90W AC DC Adapter Charger Replacement for Resmed S10 Series, Fit for ResMed Airsense 10 Air Sense S10 AirCurve 10 Series CPAP and BiPAP Machines Power Supply Cord
⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
Juried Engineering LM319N LM319 High Speed Dual Comparator Breadboard-Friendly (Pack of 5)
Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
High Frequency Transducer, Bandwidth Mixing Board Mixer Module -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver
【Important Data】: SSB noise figure (NF) of 9.75 dB--Input IP3: 28.5 dBm--Input P1dB: 13.3 dBm--Typical LO drive: 0 dBm--Power conversion gain of 1.8 dB.
【Wild Used】: This 5V double balance up and down frequency mixer module is widely used for cellular base station receivers, Radio link down converters, Broadband block conversion, Instrumentation.
【Low Power】: Our 130mA 50 Ohms Balun coil coupling frequency conversion mixer features adjustable bias for low power operation, so you can trust and use this RF mixer inverter with confidence.
【Wonderful Components】: This 5V ADL5801 double balance up and down frequency mixer module is equipped with exposed paddle, 4mm x 4mm, 24-lead LFCSP package, so it will be an ideal choice for you.
【Size】: Power supply: DC+5V@80mA(anti-reverse connection protection.)--RF_IN/RF_LO input frequency range: 10-6000Mhz--Input and output impedance: 50 ohm--Type:Input Balun coupling, Input/output Balun coupling(Optional)--Weight: Approx.15g/0.5oz.
ONIZZBAND Transfer Case Rebuild Bearing and Chain Kit Fits Jeep 231 NP231J 1994-on 16mm, Multi, xL
Transfer case rebuild bearing kit & chain for Jeep NP 231J (EXCEPT JEEP LIBERTY MODELS). The NP231J case may have either the 1" wide chain or the 1.25" wide chain. This kit includes the 1" Wide Chain. 62 Pitches / Round Pin..
Onyehn 2pcs LTC1871 DC-DC Boost Step-up Voltage Converter Module 100W High Power Adjustable Output 3.5-35V Power Regulator Board with LED Voltage Meter
No user/operator instructions or data sheets.Find the download data by yourself, please make sure you consider whether you know the operation before buying. Size: 68x42x14mm, LTC1871 IC with External MOSFET..
Conversion Efficiency: Up to 96%. Low input voltage or a large difference between input and output voltage will degrade the current capacity and efficiency..
Boost voltage to a stable regulated output. Useful for a wide range of applications, such as powering 5V USB devices from a 3.7V lithium cell, powering higher powered electronics from a 12V battery, and a wide range of automotive and electronic projects. Constant voltage regulation, not for raw LEDs..
Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage.
The nixie tube can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the nixie tube display input voltage value, "OUT" LED bright display is the output voltage value)..
Output voltage must be greater than input voltage, do not apply reverse polarity voltage, voltmeter works only when input is >= 4V..
Douk Audio VU22 Dual Analog VU Meter Display DB Panel MIC+LINE Sound Level Meter
Wired and wireless audio inputs: with stereo RCA/3.5mm AUX audio input and microphone pick up, work well with most audio devices such as phone, computer, CD players, or speakers etc., very suitable for home/office/studio to dynamically decorate your auditory feast..
Excellent sound and free settings: with 100K high-impedance input circuit, ensuring clean sound without any audio rendering when using line inputs. The color and light level of backlight also can be adjusted freely, perfectly match with different styles of audio device and environments..
Advanced AGC algorithm and better display: AGC ensures ideal visual effects even the input signal is in a small to large range, avoid that no display when input low signal and display in full screen when input high. With gain adjustment even can set the swing range of pointer, easily to control most input signals and achieve better beating effects..
Attractive looking and powerful design: all metal case with CNC machined panel, solid stepless adjustment knob, all interfaces are gold-plated to ensure the tight connection, ensures the smooth transmission of the original audio signal and minimizes the loss of the signal during transmission..
Buck Converter 12v to 5v, DROK 5A USB Voltage Regulator DC 9V-36V Step Down to DC 5V-5.3V 5.2V 3.5-6A Volt Transformer Power Supply Module for Phone Fast Charging
DROK buck converter input voltage is DC 9v-36v, output voltage is 5.2V (5V-5.3V available according to your input voltage)..
The step down regulator adopts synchronous rectification scheme to provide wide voltage range, large current and high efficiency..
Our buck voltage regulator is user-friendly, accompany with DC interface and connecting terminals, make it easier to be connected to different devices..
The voltage reducer is with USB interface and quick charge identifying chip, and is compatible with Android and Apple..
Note: Input different voltage will output different power: input DC 9-24V, output 5.2V/6A/30W.
Juried Engineering TL072CP IC Dual Low-Noise JFET-Input Operational Amplifier & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)
The TL072 JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient..
Low Power Consumption, Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% (Typical), Low Noise Vn = 18 nV/√Hz (Typical) at f = 1 kHz.
High-Input Impedance: JFET Input Stage, Internal Frequency Compensation, Latch-Up-Free Operation.
High Slew Rate: 13 V/µs (Typical), Common-Mode Input Voltage Range Includes VCC+, Example Applications: Motor Integrated Systems: UPS, Drives and Control Solutions: AC Inverter and VF Drives, Renewables: Solar Inverters, Pro Audio Mixers, DLP Front Projection System, Oscilloscopes.
Power Amplifier Board, Audio Amplifier Board, 2.1 Channel 100W Subwoofer Output for Speaker Impedance are 4/6/8 Ohm
It supports many audio input ways including Bluetooth, USB, TF card and audio input jack.
Applicable speaker impedance are 4/6/8 ohm, great for turning normal speaker into Bluetooth speaker.
Sound quality is very good by using this audio power amplifier module.
Digital amplifier has a higher overload capacity than analog amplifier, and it won't cause crossover distortion, transient inter modulation distortion and you don't have to worry about the loudspeaker internal resistance.
Dual channel of 50W+50W power output, 100W subwoofer output and a wide input voltage range from 12V to 26V DC.
Rockville BluTube LED 70W Bluetooth Tube Amplifier/Home Stereo Receiver with Blue Illumination, Optical Input, Sub Output
Rockville BluTube LED 70W Bluetooth tube amplifier/home stereo receiver with blue Illumination, optical input, Sub output.
Rockville blutubeled audiophile grade tube amplifier with Bluetooth. Black Color with blue illuminated tubes and blue illuminated knobs. 25 watts x 2 RMS @ 8 ohm. 35 Watts x 2 RMS @ 4 ohm. (1) set of RCA inputs to connect to any audio device like a TV, laptop, or MP3 player, etc. Optical input..
Coaxial input. Sub output. Tube Amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power! . Built in Bluetooth with 33 foot range. Built-in preamplifier. Headphone output. Vu meter. Adjustable bass and treble (2 band equalizer)..
Usb input for music files from USB thumb drive. Rear speaker terminals: banana Plug/ binding post outputs for 2 speakers. Frequency response (3dB): 22hz-20khz. Input impedance: 47Ko. Input sensitivity: 300mV. Output Impendence: 4-8ohm..
Total Harmonic distortion): ≤0. 02%. Signal-to-Noise ratio(s/n): ≥86dB. Bluetooth: 2. 1+Edr. Usb: Supports WAV/MP3/WMA/APE/FLAC. 110V. Unit weight: 6. 6 lbs. Unit dimension: 10. 6"X10. 2"X5. 1".
