Best 3 8 Cap Nuts

One Electric Trailer Brake Assembly Dexter 10\ x 2-1/4\ Left Side

  • DRUM KITS - M-Parts Trailer Drum Kits 5 on 5.5' for 3,500 lbs Axle.
  • BOLT PATTERN - 5 on 5.5' bolt pattern brake drum with 1/2'-20 studs and bearing races installed.
  • HARDWARE - Lug nuts (1/2'-20)/ Cotter Pin, L-68149 inner bearing- (1-3/8 inch inside dimension) / L-44649 outer bearing- (1-1/16 inch inside dimension), Grease seal - (56 inch O.D - 1.72 inch I.D)/ EZ Lube Dust cap - (1.98 inch outside dimension).
  • M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials.
Check Stock

Big Foot Toilet Bolts - No Spin Toilet Flange Bolts - 5/16\ Threading X 2.5\ Length

  • Push nuts are designed for permanent placement without the use of specific removal tools.
  • Push nuts are designed to offer simple, tool-free, push-in installation.
  • Included parts are zinc-plated for improved corrosion resistance.
  • These cap nuts are designed to push into place on a 3/4" diameter axle.
Check Stock

Steel Hex Nut, Zinc Plated Finish, Class 6, DIN 934, Metric, M2.5-0.45 Thread Size, 5 mm Width Across Flats, 2 mm Thick (Pack of 100)

  • Finished nuts are six sided nuts of standard thickness vs heavy duty hex nuts.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Use with washers to help distribute the load (not included).
Check Stock

LIBRA New 12\ x 2\ Trailer Hydraulic Free Backing Marine Brake Assembly Pair Set - 21020

  • SPECIFICATIONS - M-Parts Trailer Drum Kits 5 on 4.5” with 10” x 2-1/4” Electric Brakes for 3,500 lbs Axle.
  • BOLT PATTERN - 5 on 4.5” with 10” x 2-1/4”.
  • HARDWARE - Lug nuts (1/2”-20)/ Cotter Pin, L-68149 inner bearing- (1-3/8" inside dimension) / L-44649 outer bearing- (1-1/16" inside dimension), Grease seal - (56" O.D - 1.72" I.D)/ EZ Lube Dust cap - (1.98" outside dimension).
  • M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials.
Check Stock

Gutimore Allen Wrenches Sets Pack of 26,Metric and SAE Long Arm Ball End Hex Keys, with Magnetic Tray

  • The hex key is forged from high quality CR-V,Heat-treated, good toughness,rugged and durable..
  • 26 pieces of Hex Key Wrenches.Includes 13-pc Inch: 3/64, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in..
  • 13-pc metric: 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6,8, 10 mm..
  • This allen key set has precisely size.Ball end design to access socket cap screws up to a 25 degree entry angle,allowing easier access to those hard-to-reach places and making it easy for adjusting in all angles..
  • This allen wrench sets is easy to use.Long arm provides extened reach and enhanced leverage and torque..
  • The allen wrenches are great for working on bicycles, furniture, motorcycles, RC cars, machinery, vehicles and equipment..
  • The magnetic tray is made of stainless steel with powerful magnets that can sticks to any ferrous metal surface.Keeps nuts and bolts, parts, and small tools within reach of work area..
  • This hex keys and tray set keep your workspace organized..
Check Stock

PitsMaster Replacment Pellet Grill Smoke Stack for Traeger Pit Boss Camp Chef etc.

  • ⭐【Function】WADEO pellet grill smoke stack increases the circulation of air inside the smoker to heat food more evenly, adding more smoky flavor....
  • ⭐【Upgraded Material】The chimney surface is made of black powder coated steel, which can withstand high temperature of up to 300℃. With the....
  • ⭐【Adjustable Cap】The height of the smoke stack cap can be adjusted via the threaded hole to adjust the air circulation. Please ensure the cap....
  • ⭐【Compatibility】Suitable for Traeger, Pit Boss, Camp Chef and other pellet grills smokers. You can also perforate holes and install it if your....
  • ⭐【Package】1*Chimney Gasket, 1*Black Chimney Cap, 1*Smokestack Flue Pipe, 3*Screws, 3* Washers, 3* Nuts. Comes with everything you need and takes....
Check Stock

TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017

  • ...tock exhaust on '08-'16 FXDF, '09-'10 FXDFSE, '10-'16 FXDWG or '14-'16 FXDL. As a guideline, we suggest the Standard Controls, P/N 9063, for riders with a 33" or shorter inseam.
  • Parts Included: (1) Shift Assembly, Extended Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

binifiMux 100pcs M3x0.5mm Acorn Cap Nuts, 304 Stainless Steel / 18-8 / A2-70, Plain Finish, DIN1587

  • [✔] Package: 100pcs * M3 Acorn Cap Nuts.
  • [✔] Features: anti-rust, corrosion proof.
  • [✔] Material: 18-8 / 304 Stainless Steel；.
  • [✔] Used at where the end of the bolt needs to be covered..
Check Stock

iExcell 1275 Pcs Metric M4 x 5/6/8/10/12/14/16/18/20/25/30 Stainless Steel 304 Hex Socket Head Cap Screws Bolts Nuts Washers Assortment Kit

  • ✔ Includes 425 Pcs, 11 Sizes, Thread Pitch 0.7 mm, Thread Size( Diameter) 4mm, Thread Length From 5 mm to 30 mm, Hex Socket Head Cap Screws: M4 x 5, M4 x 6, M4 x 8, M4 x 10, M4 x 12, M4 x 14, M4 x 16, M4 x 18, M4 x 20, M4 x 25, M4 x 30.
  • Material of Screws: Stainless Steel 304, High Strength and Anti-corrosion in Various Environments.
  • ✔ Includes 425 Pcs Thread Pitch 0.7mm M4 Nuts to Meet Different Applications.
  • Material of Nuts: Stainless Steel 304, High Strength and Anti-corrosion in Various Environments.
  • ✔ Includes 425 Pcs Φ4 Washers: Add More Touch Area to Meet Special Condition In Some Cases and Protect Parts from Being Damaged.
  • Material of Washers: Stainless Steel 304, High Strength and Anti-corrosion in Various Environments.
  • ✔ Includes 1 Pcs Hex Key, Hex Size: 3.0 mm, to Drive These Screws Conveniently and Easily.
  • Material of Hex Key: Chrome-Vanadium Steel, Nickel Plated.
  • ✔ Package: These Screws, Nuts, Washers and Hex Key Packed In a Sturdy Easy-use Plastic Storage Case, Organized Conveniently and Easily.
Check Stock

TEKTON 3/4 Inch Drive Deep 6-Point Impact Socket Set, 7-Piece (13/16-1-1/2 in.) | 4890

  • Includes 6-pc. 3/4 in. drive deep 6-pt. impact sockets: 15/16, 1, 1-1/16, 1-1/8, 1-1/4, 1-1/2 in..
  • 1-pc. 3/4 in. drive deep square impact socket (for inner cap nuts): 13/16 in..
  • High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off.
  • High-contrast permanent laser etched size markings are easy to read, even in low light.
  • Premium chrome vanadium steel construction with corrosion-resistant black phosphate finish.
Check Stock