Best 3 8 inch Chuck

DEWALT 12V MAX* Cordless Drill / Driver Kit 3/8-Inch DCD710S2

  • DCD701 12V MAX* Brushless 3/8 inch drill/driver has 32% more power**.
  • DCD701 12V MAX* Brushless 3/80-inch drill/ cordless impact driver is 20% shorter**.
  • Brushless motor for maximum runtime and durability.
  • The drill/driver has a 3/8 inch ratcheting chuck for a wide variety of bits.
  • The drill/driver has a high speed transmission with 2-speed settings and 15 clutch settings.
Check Stock

Fulton 6 inch Long Forstner Bit Extension For Adding Over 5-5/8 inches of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction

  • ...on gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screw....
Check Stock

TecUnite 2 Pack Air Chuck 2-in-1 Dual Head Tire Chuck for Inflator Gauge Compressor Accessories

  • Many uses: with 1/ 4 inch female national pipe threads, the air chuck can be applied for trucks, buses, cars, motorcycles, bicycles, etc..
  • Easy operation: the tire chuck adopts a push-in chuck design.
  • No need to thread the chuck onto valve stems, just push the chuck onto the valve for a....
  • Multi function: 2-in-1 dual head tire chuck has the function of checking pressure and inflation.
  • The 1/ 4 inch NPT threads make this gauge fit for....
  • Good quality: made of chrome-plated iron and zinc alloy, can be applied repeatedly for many times.
  • There is no need to worry about rusting, tarnishing....
  • Quantity: each package come with 2 packs air chucks measuring 16.5 x 3 cm/ 6.5 x 1.2 inches.
  • Small size allows for easy carrying and storage, can meet....
Check Stock

Drill Chuck, Drill Chuck, Drill Tool 0.3-3.4mm 1/8 Inch Universal Drill Chuck Electric Chuck Set Chuck Set Spare Piece for Home

  • Comes with a handy hex key wrench that you can use to tighten or loosen conveniently.
  • This drill chuck would be a great replacement chunk for your old or broken one.
  • Made from high quality brass and aluminum alloy for durability and long service life.
  • Universal 1/8 inch chuck can be connected to many electric drills, cordless drills, etc.
  • Three-jaw head design chuck with a wide grasp capacity from 0.3mm to 3.4mm.
Check Stock

Shop Fox M1099 10 by 26" Bench athe, Metal, Large

  • ...extra 21 tooth change gear (included) you can create every American Standard Metric thread from 0.3 to 8.0 mm pitch..
  • Included contents: 32 full page Mini Lathe Users Guide (complete with operation examples, maintenance guidelines, parts diagram, wiring diagram, etc.), Precision 3" (80 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench, Tailstock (13mm) drill chuck with shank and a 6mm drill bit, 8 mm Brazed Carbide RH Turning Tool, MT2 dead center, An 11-gear change gear set that includes a 21 tooth gear for accurate metric threading, Two open end wrenches, Four hex (Allen) wrenches..
  • About Us - LittleMachineShop.com is small U.S. business and the premier source of tooling parts and accessories for bench top machinists. We have a direct relationship with the Manufacturer, and we offer full technical support for the machine plus all replacement parts, upgrades and accessories to keep it running for years of service. The 1014 lathe is manufactured by a world leader in lathes and mills and makes metalworking machines for some of the biggest tool brands in the world..
Check Stock

7Pcs Drill Adapter Impact Grade Power Hand Tools 1/4in Magnetic Socket Hex Shank Extension Rod Drill Adapter

  • Excellent Material: super heat-treated chrome vanadium steel, suitable for ordinary and impact drives, easy to use, light in weight, and can be quickly connected to standard hex nut drivers, impact hole saws, spade bits, etc..
  • Good Conversion Accessories: 3 different utility tools for installing hexagonal tools, such as pneumatic screwdrivers, electric screwdrivers, pneumatic drills and manual screwdrivers..
  • Compatible with Quick-change: 105°angle 1/4in hex bit adapter is compatible with quick-change, suitable for most electric drills, cordless drills, manual wrenches and screwdriver chucks..
  • Quick Release Rod: 1/4in hex handle magnetic extension chuck adapter quick release rod hex socket screwdriver drill chuck suitable for electric and pneumatic screwdrivers and other electric tools..
  • Color Adapter Kit: 3 pieces of color socket adapter impact kit includes 1/4 inch drive adapter, 3/8 inch drive adapter, 1/2 inch drive adapter..
Check Stock

6 Pieces Tire Accessories Set Including Brass Air Chucks Closed Flow Straight Tire Chucks Tire Chuck Lock-on Clips Tire Air Chuck Adapters and Tyre Valve Stems for Bus Car Motorcycle

  • Package included: you will be provided with 6 pieces air chucks, including 2 pieces brass air chucks, 2 pieces closed flow straight tire chucks and 2 pieces tyre valve stems, sufficient quantity and sensible combination will satisfy your different demands.
  • Quality material: the tire inflator accessories set is made of brass material, sturdy and durable, not easy to deform and break, corrosion and rust resistant, which can serve you for a long time.
  • Dimension information: the tyre chuck measures approx. 5.83 x 1.18 inch/14.8 x 3.0 cm, the closed ball air chuck measures approx. 1.22 x 0.83 inch/3.1 x 2.1 cm, and the air chuck adapter measures approx. 1.69 x 1.34 inch/4.3 x 3.4 cm, detailed dimension information for you to know.
  • Easy to use: the air chuck with clip can be easily fixed to the valve stem, and the screw tire chuck can also tightly hold the tire valve to ensure sealing, the former can directly clip your car’s tank valve, and the latter need to be put on the valve and then swirl the chuck, simple operation without taking much time.
  • Wide application: the tire air chuck set can be applied for air pump and compressor accessories, and also can be applied for trucks, buses, cars, bicycles, motorcycles and more, bring convenience to your life.
Check Stock

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • ...on gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screw....
Check Stock

GODESON Air Chuck, Screw on Tire Inflator Nozzle for Tire Inflator Gauge Compressor Accessories, Twist-on Chucks(Pack 2pcs)

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with locking on make the tire air chucks durable and Reliable..
  • 2. INTER SCREW TIRE CHUCK - including 2 packs Twist-on chuck(thread on) in 1 package. Twist-on chuck can tightly hold the tire valve of bicycles,motorcycles,cars, buses and trucks..
  • 3.TIRE INFLATOR CHUCKS with thread can make it bite on the tire valve stem tightly when inflating.
  • 4.UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction Guarantee..
Check Stock

WEN 4211 3.2-Amp 10-Inch 5-Speed Cast Iron Benchtop Drill Press with Laser and Keyless Chuck

  • Features a 3.2A induction motor, a 10-inch swing, and a 2-1/2-inch spindle travel.
  • Includes a 1/2-inch keyless chuck for easy bit changes.
  • Operates at 5 different speeds: 600, 1100, 1700, 2400, or 3100 RPM.
  • Includes a laser, adjustable depth stop, beveling 7-5/8 by 7-5/8-inch height-adjustable worktable, and a two-year warranty.
  • Measures in at 26-1/2 inches tall with a 13-1/8 by 8-1/8-inch base.
Check Stock