Best 3 Air Coupler

PneumaticPlus SAR400T-N04BG Compressed Air Regulator 1/2\ NPT, T-Handle, Gauge & Bracket

  • 3/8" NPT Air Regulator w/Gauge - Precise Pressure Regulation.
  • Zinc Alloy Body- Higher Hardness and More Compression Resistance than Aluminum Alloy and Plastic Materials..
  • Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage..
  • Operating Pressure: 0-10 Bar (0-145 psi).
  • Flow Rate: 88 SCFM @ 90 psi (2500 L /Minute @ 6 Bar).
  • Temperature Range: 41-140°F(5-60℃)..
  • Includes 0-150 psi Gauge & Metal Bracket, a pair of 3/8" NPT Brass Air Coupler& Plug Kit, 2 x 3/8" NPT Fittings, 1 x Thread Seal Tape..
Check Stock

Portable Air Conditioner Universal Exhaust Hose 5 Inch Diameter 59' Long Clockwise Thread Room Airconditioner AC Vent Replacement Tube

  • 【EXPANDABLE HOSE】The shortened length of the hose is 12.6 inches. You can extend the hose up to 59 inches..
  • 【EASY INSTALLATION】 Fully expand the end of the hose, align with the coupler, and rotate the coupler counter-clockwise to twist onto the hose. Repeat on the other end of the hose to attach to the second coupler..
  • 【UNIVERSAL SIZE】Exhaust hose fits various portable air conditioner models as long as you are using the same hose its connector has 5 inches / 13 cm (outer edge to outer edge) in diameter..
  • 【DURABLE AND PORTABLE】 The air exhaust hose is made of polypropylene with good flexibility, which is a good replacement when the essential vent hose has cracked..
  • 【Application】 Our hose fits the most popular portable AC models that use a 5-inch diameter hose, such as Honeywell, Toshiba, Delonghi, Haier, Whirlpool and more..
Check Stock

Shocker Air Equalizer & Round Bar Weight Distribution Hitch, Fits 3" Hitch 5" Rise 4" Drop

  • ...tongue weight capacity plus 7" or 9" of Adjustment (5" of rise to 2" drop or choose 5" rise to 4" drop). Fine tune for your towing weight. Just add air for heavier loads. Designed for 6,000 to 11,500 lbs gtw camper trailers..
  • For 2-5/16" Couplers & Made Fits Pickup Trucks Only: The Air Equalizer is designed for pulling with a Pickup Truck ? it will not work with SUV/CUV with coil over springs in the rear. Comes with 2-5/16" hitch ball. If you have a 2" coupler you will need to change the ball. (2" ball not included). Available for 2",  2 1/2" & 3" receiver hitch tubes: Works great on pickup trucks..
  • Kit includes: Air Equalizer, XR Ball Mount Base frame and two-handled hitch pins w/clips & round bar weight distribution hitch with 2-5/16" hitch ball..
  • Safety Notice: The Shocker Hitch is a heavy-duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the truck that is mounted on, the trailer coupler rating and the ratings of....
Check Stock

LIVTE 2 Pack 5 Inch Air Conditioner Hose Extention Coupler Exhaust Hose Coupler, AC Exhaust Vent Hose Coupler Connector, Fit Both Clockwise and Counter Clockwise AC Hose Threads

  • 【2 Pack & Size】This ac exhaust hose coupler is designed to securely fit on 5-inch tubes with no leak, Compatible with outer diameter 130mm and inner diameter 5 inch. Please check the diameter before buying..
  • 【Thick ABS Made】This ac exhaust hose connectors is made of hardened ABS, providing a tight seal to the air conditioning unit tube to avoid any leakage, improving cooling or heating effect, saving power consumption..
  • 【Extent You Hose to any Length】Easily use this AC hose coupler extender to connect the hoses through the wall or windows. Meeting your needs of lengthening the exhaust pipe and replacing the connector..
  • 【Easy Installation】simply screw on and no tools needed, the portable air conditioner exhaust hose connector is designed to universal fits both clockwise and counter-clockwise thread hose..
  • 【100% Money Back】For these air conditioner exhaust hose coupler, you will get a 100% customer support. Any quality problems, a replacement or a full refund will be assured..
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Measuring Meter 1/4" Fittings Can Tap Quick Coupler, 42" Long

  • ...th anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly.
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve).
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of piercing type refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp ....
Check Stock

Esco 10202 Pro Series Combination Bead Breaker Kit with 5 Quart Hydraulic Pump

  • Includes model #10101 Combi Hydraulic Bead Breaker.
  • 5 quart hydraulic pump with durable metal reservoir and aluminum air motor.
  • 8 ft. hydraulic hose with swivel fitting and coupler.
  • Kit includes air pressure regulator that regulates the inbound air pressure to 110 psi which prevents damage to the seals and hydraulic system.
  • Works on all single, two and three piece wheels.
Check Stock

NANPU 3/8\ NPT Compressed Air Filter Regulator Lubricator (FRL), 5 Micron Brass Element, 0-150 psi Gauge, Manual Drain, Metal Bracket

  • 3/8" NPT Air Filter Regulator Lubricator Combination- Cleans & Dry Air, Precise Pressure Regulation, Lubricate Your Equipment with Air (Recommend Lubricator Oil: ISO-VG32)..
  • Two-Way Installation: Air can be Input from the Left or Right, the Position of the Pressure Gauge and the Bracket can be Exchanged..
  • Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage.
  • 5 Micron Brass Filter Element - Excellent Filtering Performance, Much Longer Life and Reuse Feasibility..
  • Operating Pressure: 0-10 Bar (0-145 psi).
  • Flow Rate: 74 SCFM @ 90 psi (2100 L /Minute @ 6 Bar).
  • Temperature Range: 41-140°F(5-60℃)..
  • Includes Manual Drain & Polycarbonate Bowl with Plastic Guard, 0-150 psi Gauge & Metal Bracket, a pair of 3/8" NPT Brass Air Coupler& Plug Kit, 2 x 3/8" NPT Fitings, 1 x Thread Seal Tape..
Check Stock

WYNNsky Air Compressor Accessories Fittings, Universal Type Air Coupler with 1/4'' NPT Male Threads, 10 Pieces Air Tools Fittings

  • 1/4''MNPT heavy duty brass air coupler with sealant,Universal type..
  • 1/4'' basic flow size with Max working pressure of 300 PSI..
  • For switching quickly between different air tools and accessories with ease during applications..
  • Brass coupler features high corrosion resistance and long life..
  • The product comes with 1 year quality warranty..
Check Stock

DUOYI R1234YF to R134A Low Side Quick Coupler R12 to R134A Conversion Kit Car Air-Conditioning AC Charging Hose Adapter Fitting Connector R134A Adapter for A/C Hose

  • 【R1234YF/R12 to R134A Low Side Quick Coupler for Car Air-Conditioning】R1234YF to R134A Low Side Quick Coupler is suitable for AC charging of car....
  • 【R134A Adapter Fittings Model】R1234YF Low Side Quick Coupler: Low side R1234yf coupler 14 mm female x 1/4"SAE male. R12 to R134a Adapter....
  • 【R12 to R134A Conversion Kit is Made of High-quality Aluminum】This adapter is made of high-quality aluminum, with good sealing performance and....
  • 【R1234YF Low Side Quick Coupler with Push Lock Design】Push lock design, with automatic closing function, easier and more convenient to disassemble....
  • 【R12 to R134A Adapter Includes】A low-side R134A quick coupler, a R1234YF low side quick adapter and a blue service port cover..
Check Stock

20 Pieces Air Compressor Accessory Kit, 1/4″ x 25 Feet Hybrid Air Hose, 1/4″ NPT Air Tool Kit with Tire Inflator Gauge, Blow Gun and Air Hose Fittings

  • This air hose is blended rubber and pvc material for heavy duty, lightweight, flexibility, abrasion resistance and all weather use..
  • Equiped with 1/4″ industrial NPT fittings and quick coupler for directly connect to air compressor and air tools..
  • 1/4″ inner diameter by 25′ length, delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure..
  • 20 pieces air tool parts includes Tire Inflator with Gauge,blow gun,rubber tip,metal tip,inflation needle,tapered nozzle,safety nozzle,Air Clean Tool adapter,1/4″ MNPT industrial plug,1/4″ FNPT industrial coupler,1/4″-18NPT Male Connector,1/4″-18NPT Female Connector,Teflon Tape..
  • This Heavy Duty Air Compressor Accessory Kit is ideal for garage, shop, industry, home and many other uses..
Check Stock