MaxLine Rapid Air 45 Degree 1/2' NPT Pipe Thread Brass Street Elbow Fitting 50131
This is a solid brass street elbow that features 1/2" male NPT threads on one side as well as 1/2" female NPT on the opposite side..
This part is produced by RapidAir for the 3/4" MaxLine air piping systems outlets to install an air coupler at a 45 degree angle, but can be used for other applications as well..
1/2" Threads Measure about 3/4" in diameter if measured with a tape measure..
DERNORD 2 Pack Stainless Steel Hose Barb 3 Way Tee T Shape Barbed 3/4” Union Home Brew Fitting 3/4”Barb x 3/4”Barb x 3/4”
Size: 3/4”Barb x 3/4”Barb x 3/4”Barb (19mm).
Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
YOTOO Recoil Air Hose Kit with Tire Inflator Gauge, 1/4' Industrial Quick Coupler and Plug
...ble. Flexible even at -40 to 150 dgree F. Max working pressure 150PSI. Installed quick coupler and plug for easily and Quickly to connect air supply and air tools..
HEAVY DUTY TIRE INFLATOR WITH GAUGE: Built of high quality, heavy duty components that provide lasting performance.
Included ¼" NPT Quick- Connect male fitting and high-quality brass air chuck.
Battery free design removes complications to get the job done faster.
3-IN-1 MULTIFUNCTION TIRE INFALTOR GAUGE: The no-guess gauge displays the PSI measurements clearly, even if it is not connected to an air compressor.
Bleed Valve releases excess air without removing the chuck from the tire’s valve stem.
Inflator connects to any ¼" NPT air compressors outputs to quickly fill tires to optimal pressure.
UNIVERSAL COMPATIBILITY TIRE INFLATOR: Compatible with cars, trucks, SUVs, motorcycles, bicycles, or anything else that utilizes a schrader valve.
Easy to read 3" glow-in-the-dark dial makes everything easier as well.
WARRANTY&SUPPORT: FREE 100% Lifetime Satisfaction Guarantee when you order today, so click "Add to Cart" with confidence.. Any problem, please feel free to contact us..
Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP
25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
DERNORD 2 Pack Stainless Steel Hose Barb, 3 Way Tee T Shape Barbed 3/8” Union Home Brew Fitting (3/8”Barb x 3/8”Barb x 3/8”Barb)
Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP
42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP
20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
JACO Dually Tire Air Chuck – 1/4″ NPT | Dual Head Straight Foot (Closed Flow)
Dual Head – this straight, extended dually tire air chuck features dual heads designed for use on both inner and outer facing tire valve stems on dual wheel setups such as dually trucks, semi trucks, trailers, RV, motorhomes, and campers..
Extended Reach – this straight dual air chuck measures 6.7 inches long, making it easier to access hard-to-reach tire valve stems. Built to last from solid steel & trusted by mechanics and truck drivers everywhere..
1/4 inch Fitting – the end of the tire chuck features a precisely machined 1/4 inch F-NPT (female) threaded fitting, making it compatible with most air compressor hoses & accessories..
Lifetime Warranty – all JACO tools come backed by a 100% Lifetime Warranty that covers all performance and manufacturing issues, so air up your dually tires with confidence using a quality JACO air tool!.
Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
featuring a 2-stage rotary vane design, 7.4 ounce oil capacity, and non-skid feet.
1/4 HP, 115V/60Hz thermally protected motor.
Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch ACME adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Brivic Indoor Air Conditioner Cover AC Cover for Inside Window Unit 25 x 17 x 3.5 inches L x H x D ,Black
Applicable Dimension:Inner size 25” x 17” x 3.5” (L x H x D), fitting most of 10000BTU to 12000BTU window air conditioners or indoor AC unit....
Reduce heating costs:The indoor air conditioner cover with embedded cotton blocks warm air escaping and cold air getting through in AC.Prevent heat....
Innovative design: The inner lining near the air conditioner is made of water-resistant fabric.Block humid air entering to keep your equipment safe.....
Remain in place:Adjustable straps on both sides and elastic cords around allows you to achieve a snug fit.Provide customized fit..
Premium AC cover for inside:Combining convenience and practicality.No tools required. Simply slip the cover over your air conditioner..