BulletProof Mining Graphics Card PCIe Riser VER 009S 16x to 1x Powered Riser Adapter Card w/ USB 3.0 Extension Cable & 6-Pin PCI-E to SATA Power Cable | Bitcoin | Ethereum Mining
Mine Bitcoin, Etherium, Dogecoin, Shiba Inu coin! The crypto revolution is now!.
Version 009S riser kits are the top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined alt-coin).
4 High Quality Solid Capacitors, Voltage Regulation, and.
60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Overcurrent Protection. Gold plated contacts for flawless connectivity and a long lifespan..
6-pin PCI-E power to 15-pin SATA power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compatibility with your power supply..
MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD
8 GPU Ports - The mining rig come with 8 GPU interfaces, the GPU interface spacing is 65mm. 8 GPUs can be installed on the motherboard at the same time. Compatible with AMD/NVIDIA GPUs..
2500W PSU - Our EHT miner is equipped with a 2500W professional Low Decibel mining power supply (176V to 264V), with ultra-high work efficiency, and is equipped with multiple power protections..
Complete Mining Rig- Include 2500W PSU, B75 MB, CPU G2030, 128G SSD, 4G RAM, eight 4500 rpm fans, 8 pin cables, and screws. Compatible with Windows or OS, but need to install the system yourself..
Upgrade Material - MLLIQUEA mining GPU frame case is made of high-quality steel, which is sturdy and durable. Can fully protect your GPU and electronic equipment from damage and saves your use cost..
Effective Heat Dissipation - Upgraded version of the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purc....
Mining Rig Frame - 6 GPU, Steel Open Air Crypto Mining Frame Rig Case with Switch Cable & Gloves, Support Long & Short Size GPU, for ETH/ETC/ZEC/BTC/Bitcoin/Ethereum/Dogecoin (6GPU)
PROFESSIONAL MINING RIG FRAME: 6/8 GPU Mining Rig Frame, crypto mining frame for ETH/ETC/ZEC/BTC/DOGE. Used to protect GPU and electronic equipment, can keep all cables clean and organized, along with everything in your mining machine..
COMPATIBLE SUPPORT: The Crypto Mining Frame support 6~8 graphics cards, supports all standard ATX/BTX/FLEX/ITX/MicroATX motherboards, supports the largest motherboard size 305*245mm.
supports 1 ATX power supply(Supports up to 260mm length), supports 4*12CM fans, support 1 HDD+2 SSD installation positions..
EASY INSTALLATION: The Open Air Mining Frame has precise screw holes and easy installation. You can quickly complete the layout of the Mining Rig. Product size 19.7x11.2x8.9inch (50x28.5x22.5cm)..
RUGGED AND DURABLE: The mining rig case is made of thickened 1.0mm steel plate. It is durable that can use for many years. Fully Protecting Your GPU and Electronic Device. Open Air Mine Frame Design + 6 Graphics card spacing 81.28mm(8 Graphics card spacing 60.96mm) bring you the ultimate heat dissipation performance..
IMPROVEMENTS & UPGRADE: We learned that the first generation of products has the defect of weak support for short graphics cards. Now, we're rolling out our new Mining Rig Frame! The addition of the middle s....
SOONTECH Complete Mining Rig System for Ethereum Coin with Windows 10 Mining Motherboard Including CPU,SSD RAM,PSU Open-Pit Mining Machine,Frame Mining Machine EXCLUDING GPU/1 Layer Mining RIG
OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....
6 Pack PCI-E Riser GPU Risers Card 10 Capacitors,16x to 1x Pcie Express Powered Adapter Card for Bitcoin Litecoin ETH Coin Mining with RGB Colorful LED Light & 60cm USB 3.0 Extension Cable
✅ 【Latest Upgrade Pcie Riser Mining】 Our 1x to 16x pcie riser design with 10 solid capacitors, 5 colorful RGB lights, dual chip voltage and upgrade large-size integrated inductor which providing sufficient power, keeping your mining devices away from overheating and over voltage, make sure the PCI-E extension card more effective..
✅ 【Superior RGB Alternate Lights 】 5 kinds of colorful LED Christmas atmosphere RGB lights that with switch control, alternate LED lights display working state, you can turn off the light according to your preference..
✅ 【Upgraded 10 Solid Capacitors】 This high quality pcie to gpu adapter is equipped 10 capacitors make sure the graphics card power supply more stable and safer, protect your GPU and investment. It is the latest and most advanced solution for setting up GPU mining equipment on the market..
✅ 【Stable Input Interfaces】 Our gpu risers have 3 groups of power input Interfaces ( 6 PIN+4PIN Molex +SATA15 Pin) to reduce the burden on the connection between the motherboard and graphics cards. The Gold-plated contact ensures perfect connectivity and extend service life and provide faster data transmission speed..
✅【WIDELY APPLICABLE】 Our pcie to gpu adapter with a fixed buckle that make sure th....
8 GPU Mining Rig 68mm Slots, Crypto Ethereum Miner Frame with Barebone Motherboard for ETH/ZEC, Cryptocurrency Machine System Case with SSD/RAM (Without GPU/PSU)
【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
【4 Fans Support】 The mining rig case is equipped with 4pcs 3000rpm cooling fans, which can provide airflow allowing for assistive GPU cooling..
【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please feel free to contact me and we will provide you with technical support..
【Mining rig case package】 Including: motherboard, Intel CPU, 12....
8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD
【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....
Connectors: One end is 24-Pin (20+4)pin male connector, plugs into the ATX power port on the motherboard. The other two ends are 24-Pin female connectors, connect to two PSU..
Low Cost: Allows you to connect two PSU to your ATX motherboard (both 24 pin and 20 pin), and save overall hardware costs of big and expensive power supply..
More Efficient: Use the power on/off switch on your motherboard to power both power supply units simultaneously to run on a single motherboard..
Applications: Great for 6+ GPU mining rigs that need extra power, applied to intense Gaming, BitCoin, Ethereum, Zcash, Litecoin..
PXY-ELEC Complete Mining rig System. BTC-X79-5 Mining Motherboard 5 PCI-E 3.0 Graphics Card Slots, Including CPU, SSD,(8G) RAM, PSU, Support 3060GPU Full Speed ETH Miner (Without GPU 8G RAM)
BTC-X79-5 card mining machine is optimized for 3060 LHR v1, and the single card computing power of 3060 graphics card is as high as 48MH/s or more. The noise during operation is around 55db. It runs very quiet, very suitable for home use ，X79-5 card mining machine motherboardsupports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards.
This is a complete set of miners (note no GPU), it already contains: x79 motherboard, intel 2609 v2 CPU, 8GB RAM, 128GB SSD, 1800w power supply, 6 PIN cable to (6+8) Pin*5pcs, 3 Fan, metal frame. Lifting kit, only need to prepare graphics card, monitor, mouse, keyboard to run..
X79-5 card mining machine main board adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. Note the width of the graphics card. When using hiveos to start, enter the BIOS to set the U disk to start, wait 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
If you want to use other CPUs, please use CPUs below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2, etc. You can also install additional layers, each miner is equipped with parts.
Michal Tech Hobby Mining GPU Hanger for Wire Rack Pack of 6
HOBBY VARIATION - Heat resistant for complete open air system only. High heat tolerant variation for enclosed systems NOW FOR SALE: PROFESSIONAL GPU....
SIMPLE and CONVENIENT - Compatible with almost all wire racks.
EASY TO INSTALL - This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on....
Full kit includes set of 6 screws and 6 hangers..
NOTICE - GPU's with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU,....
