3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)
Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller
Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
Durable brazed side fitting allows system access for various A/C service procedures.
TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI
The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
The steel pressure washing ball valve kit is designed for pressure washer hose..
The max working pressure is 4000 PSI. The max working temperature is 158 F..
The ball valve is easy to turn on and off. It offers great leverage under high pressure..
OSOF 25Pcs Tyre Valve Stem Puller Tools Set - 10Pcs TR412 Snap-in Valve Stems with 10Pcs Valve Stem Cores, 1Pcs 4-Way Valve Tool, 1Pcs Dual & 1Pcs Single Head Valve Core Remover Installer Tool
【Function】25 In 1 Tyre valve stem puller tools set. For quick removal or installation of tyre valve inserts and repair tire.Works with any wheel that uses a standard 0.453" valve stem.With 10 replaceable Valve stems and multiple wrenches，meet your different needs..
【Material】- Durable plastic handle and robust steel shaft with a corrosion resistant plating these valve cores is copper nickel-plated valve cores .The nickel plating enhances the corrosion resistance of the valve core and valve stem. Rubber TR412 Valve Stem Cores ，more durable, safe and reliable..
【Widely Use】- Suitable for repair of tubeless tires for passenger cars, bicycle,motorcycles, ATVs, electric cars, off-road vehicles and trucks.Fit for all standard valve cores..
【Easy to Use】- Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems.The tool sets easy to carry and use..
【Package】1 Pcs Long Valve Stem Puller Installer Tool.
1Pcs Single Head Valve Core Remover, 1 Pcs Dual Single Head Valve Core Remover ,1 Pcs 4-Way Valve Tool, 1 x Tire Valve Stem Core Tool -- Total 25Pcs/Pack.
Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid
SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
This minimizes pressure loss through the valve.
9V-24V AC/DC- Works effectively over entire voltage range.
No power expended once fully open or fully closed.
3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank
...i, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valv....
Brady Prinzing Ball Valve Lockout, Small, for 1/2\-2-1/2\ Outside Pipe Diameter, Red - BS07A-RD
BALL VALVE LOCKOUT: Ball valve lockout device designed to lock pipes 0.5" to 2.5" in diameter.
DURABLE VALVE LOCKOUT: Made from ultra-tough polypropylene, this ball valve lock can resist temperatures from 0° to 175°F (-18° to 79°C).
VERSATILE VALVE LOCK: Ball valve lockout device can also be used to lock valves open on pipes 0.5" to 1.25" in diameter.
OSHA COMPLIANT LOCKS: Compliant with OSHA's Lockout Standard designed to address safety standards.
TRUSTED LOCKOUT TAGOUT: Brady is a world leader in lockout/tagout products and services offering industry expertise and a broad range of durable, easy-to-use lockout devices.
