Best 3 Way Manifolds

Exhaust Headers Manifold 1-5/8 in. Mild Steel for 2002-2013 Silverado Sierra Suburban Tahoe Yukon Escalade 4.8L 5.3L 6.0L 6.2L V8

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) cold roll flash mild steel.
  • Head flange laser-cut from 3/8-inch (9.5mm) thick steel plates and flattened by hydraulic press.
  • All joints TIG welded for great resistance against cracking and wearing.
  • Hi-temp paint that holds up to 500C or 932F.
Check Stock

SNIPER 870021 MAP Sensor 2.5-Bar EFI Fabricated Intake Manifolds

  • Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with LS1/LS2/LS6 cathedral port heads. Improves throttle response, torque and airflow..
  • Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow for tuning of power band..
  • The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency. The Lexar uses advanced polymer materials to cool intake temps for increase airflow and engine efficiency..
  • Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar features a sleek black finish, FAST logo with an option to add billet fuel rails. The Big Mouth Throttle Body features a slick natural billet aluminum finish..
Check Stock

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

Moxa Americas,Inc - MGATE MB3170 - 1 Port Modbus TCP to Serial Communication Gateway

  • Ideal Applications Include Valve Covers, Intake Manifolds, Coolant Flanges, Oil Pans, Timing Covers, Heavy-Duty Truck and Fleet.
  • An additional application nozzle is included in every package for multiple use convenience..
Check Stock

BACOENG Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - Diagnostic R12 R22 R134a R410A - w/Case

  • Gauge Set — 2 Valve Manifolds with Sight-glass & 1/4″ SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading.
  • Vacuum Pump – Newly Designed Compact Vacuum Pump, Portable and Stronger. Flow rate: 3.6CFM Power: 1/4HP Ultimate Vacuum: 0.8Pa.
  • Accessory–3 × 4FT Blue Red Yellow Refrigrant Hose,2 × 1/4″ SAE Male to 5/16″ SAE Female Adapters(R410a), 1 × Toolkit, 12oz Vacuum Oil, 1 × Manual for Pump and Gauge.
  • Hose– All hose are complied with SAE-J2196 standard standard. Hose Working pressure: 800PSI-4000PSI Acceptable refrigerant: CFC HCFC and HFC.
  • 【Attention】- Ideal for R12 R22 R410A R407C. NEED additional high & low pressure side quick couplers B085XHTS1W if you need to repair R134a vehicle A/C system..
Check Stock

JB Weld 8297 -DEU HighHeat Heat-Resistant Epoxy Metal Putty for All High Temperature Work

  • Temperature durable metal putty. Withstands continuous heat up to 235 °C and tip effects of 260 °C.
  • Suitable for exhaust manifolds, exhaust pipes, Silencer, engine, blocks and all your high temperature needs..
Check Stock

EMILYPRO Aluminum Polishing Wheel for Drill Chrome Rim Manifold Polishing Kit 3\ x 1/4\ Hex Shank Cone/Mushroom/Column - 3pcs

  • 【Application】The aluminum polishing wheels be used for polishing recessed areas / tight space or gap / irregular surfaces such as mag wheels, motorcycle wheels, car rim, manifolds etc..
  • 【Special Design】The chrome polishing kit are designed as Cone/ Mushroom/ Column shape, great for reach and achieve different space/areas polishing purpose..
  • 【Good Quality】The rim polishing balls are made with fine cotton cloth with furring surface treated, mounted with hex shank with notch cut to make sure not slip off from drill..
  • 【Widely Use】The drill buffing ball are suitable for polishing car rim, wood, plastics, acrylic, ceramics, glass, metals (stainless steel, aluminum, chrome) etc..
  • Column: 2-1/2”. Shank dia: 1/4". Material: Cotton. Package: 3pcs..
Check Stock

GT45 13PC T4 TURBO KIT+MANIFOLD+INTERCOOLER CHEVY SMALL BLOCK LSX CAMARO LS1

  • Mustang Fox Body Twin Turbo High Performance Package.
  • Bolt on Aluminum Intercooler with Intercooler Piping kit.
  • Kit now feature Internally Wastegated Turbo Units for ease of installation.
Check Stock

Eastwood Durable Resistant Matte Silver Finish Coating Aerosol Pints 11.75 Oz

  • Temperature Resistant Up To 1400 Degrees.
  • "Easy Brush Or Spray-On Application, Aerosol covers approximately 6 sq ft ".
  • Each Can Is Sufficient To Coat 2 Standard Cast Iron Manifolds Or About 6 Sq Ft.
  • 2 Cans Recommended For Header Systems, One pint covers approximately 12 sq ft.
Check Stock

Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0

  • Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0.
  • Cast passenger and driver side manifolds.
  • -4AN oil feed kit with adapter plate + Hardened stainless hardware.
Check Stock