Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces
Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
Note: when installing the check valve, pay special attention to the flow direction of the medium.
The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
LSM Racing Products SC-800 Valve Spring Removal Tool
This Power Valve Adjustment Tool to easily adjust your power valve properly.
Adjusting the power valve allows the rider to custom set the power the way they like it, whether it's more bottom to midrange or even all top end for those flat out desert races, adjusting the power valve on your bike is a simple quick way to give you more control over you motorcycle and how it runs..
Had designed a billet aluminum power valve tool with a wide handle that makes is easier to turn and it fits perfectly into the square pocket on the right side of the motor..
Tuning in the power valve will help get the best performance out of your bike..
Small enough to fit in your fanny pack to make adjustments on the fly.
Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat
【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....
ZRDR 4L Co2 Generator System with Dual Gauge Display Pressure Gauge,DIY Co2 Generator System Kit, Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium, Stable Output
... 【New upgrade bubble counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
【Safety protection】 The zrdr co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve, make you away from the danger of solenoid valve leakage, protect your safety.
【Refine The Bubbles】Our CO2 aquarium kit is equipped with an atomizer, which can purify bubbles, make them easily soluble in water and absorbed by plants, and make your aquarium full of vitality. We also gave you an extra atomizer as a replacement to extend the service life of the product. When using this product for the first time, there will ....
CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey
Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.
American Standard RU531 Flash 3-Way Integrated Shower Diverter Rough Pressure Balance Valve Cartridge, No Finish
COMPACT DESIGN — Smaller body fits in tight spaces.
EASY TO INSTALL — Flat back mounts securely on cross brace.
3-WAY DISCRETE FUNCTION — Optional shared function capability.
VERSATILE INSTALLATON — Compact body and flat back for easy and solid installation.
3-WAY DISCRETE FUNCTIONALITY – Provides the ability to alternate water flow among 3 separate outlets.
OPTIONAL SHARED CAPABILITY - Provides the ability to share water flow simultaneously from any 2 outlets with the addition of shared cartridge, M970730-0070A, sold separately.
150° COMFORT RANGE — Provides a wider, more usable temperature range when fine-tuning water for the perfect shower.
NO SOLDERING REQUIRED — Solid brass inlet connections for fast installation without adaptors, reducing leak points.
QUALITY PRESSURE BALANCE VALVE — Double ceramic technology ensures faster adjustment to changes in water pressure to eliminate scalding, and a guarantee of drip-free performance for life.
EXCLUSIVE PLASTER GUARD — Protects valve and acts as a guide during installation.
can serve as mounting support for thin-wall installations.
HQMPC Heavy Duty Brass Shut Off Valve Garden Hose On Off Valve Brass Water Hose Valve Hose On/Off Valve Garden Hose Connector (2PCS) +4 Extra Pressure Washers
Extreme Duty Brass Shut Off valve,brass one way valve,Solid Brass Construction,no leakage.
The package include 2pcs brass garden hose shut off valve,4pcs pressure washers.
The garden hose connector size thread standards: 3/4" GHT thread easy to turn on and off.
Attention: We remind on our packing of the shut off valves contain Pb. In fact, All Brass contain Pb more or less. If you mind Pb, please buy other material..
Brass shut off valve for garden hose, we provide 3 years gurantee. Just order them with your prime. If you have any slightest problem with these products,we will 100% refund to you or replace a new set for you.