Best 3 in 1 Flaring Tool

Uniweld UDFT Electric/Manual R-410A Ratchet + Clutch Flaring Tool

  • Specifically designed to meet R-410A flaring specifications and all 45° flares..
  • Internal break away clutch that disengages when flare is completed, prevents over flaring and crushing the copper tubing..
  • Automatic tube stop height gauge for a perfect R-410A flare every time!.
  • 3/4" -12 point reversible ratchet wrench included reduces the amount of effort required to manually flare in a confined work space..
  • 3/8" square drive can be used with a cordless electric drill for faster flaring. Cordless drill and socket adapter not included..
  • Eccentric off center cone that spins on an axis and rolls out a perfectly uniform 45° flare with a burnished flare surface..
  • Self-Centering Clamping Dies for 8 Tube Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 inch O.D..
Check Stock

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

  • Dimple Die for 1-1/4” Actual Hole Size.
  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

Neiko 20657A ISO/Bubble Flaring Tool Kit

  • Designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm.
  • Includes blow-molded carrying case for organization and storage.
Check Stock

Eastwood 37 Degree Flare Die Set for Professional Brake Tubing Flaring Tool

  • Add These 37-Degree Flare Dies To Our Pro Brake Tubing Flaring Tool So You Can Do Even More..
  • Put 37-Degree Flares On 3/16", 1/4", 5/16" And 3/8" Tubing.
  • 37-Degree Flares Are Used In Many Custom, Hydraulic And Military Applications Where An- Or Jic-Type Fittings Are Used.
Check Stock

Capri Tools 3/16 in Double Flaring Tool CP21110-316

  • Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on....
  • Works flawlessly with 3/16 in. steel, nickel, and copper tubing.
  • Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots.
  • Detachable die lets you also use with a bench vise.
  • All-in-one tool. All you need is a 10 mm and a 17 mm wrench to work with the tool.
Check Stock

Yellow Jacket 60278 Flaring Tool

  • A Full Range 1/8 To 3/4 Inch O.D. Flaring Tool Available For Copper, Brass And Aluminum Tubing.
  • Self-Centering Yoke For Precise 45 Degree Flare Grips Without Marring Or Constricting Tube.
  • Automatic Tube Height Gauge For Correct Tubing Height.
Check Stock

Brass Compression Tube Fitting, Union Assortment Kits, 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ OD (5pcs)

  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

CPS FT800FN R410A Imperial Clutch-Type Ecentric Flaring Tool with Ratchet, Black

  • CPS FT800FN R410A Imperial Clutch-Type Ecentric Flaring Tool with Ratchet.
  • WHAT IT DOES: Engineered to create stronger flare joints for high pressure R-410A systems.
  • CLEAN FLARE WALLS: Unique clutch driven feed screw and faceted cone produce uniform, clean flare walls without thin spots or galling.
  • TORQUE: This tool provides an exact amount of flaring torque with break away clutch system.
  • INCLUDED: A rugged polyethylene storage case is included.
Check Stock