Best 3 piece Ball Valve

TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI

  • The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4000 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 1/4’’ quick coupler plug + 1/4’’ male NPT thread.
Check Stock

Eastwood 1/2 in. Ball Valve For Dual Blaster For Mixing Valve Assembly

  • Replaces Ball Valve For Mixing Valve Assembly On Dual Blaster.
  • Inline Valve For Connecting Two Pipes Going In The Same Direction With Double-Seal System.
  • Heavy Duty Stainless Handles To Increase Service Life, Fast Turn Open Or Closed Operation.
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

Brady Prinzing Ball Valve Lockout, Small, for 1/2\-2-1/2\ Outside Pipe Diameter, Red - BS07A-RD

  • BALL VALVE LOCKOUT: Ball valve lockout device designed to lock pipes 0.5" to 2.5" in diameter.
  • DURABLE VALVE LOCKOUT: Made from ultra-tough polypropylene, this ball valve lock can resist temperatures from 0° to 175°F (-18° to 79°C).
  • VERSATILE VALVE LOCK: Ball valve lockout device can also be used to lock valves open on pipes 0.5" to 1.25" in diameter.
  • OSHA COMPLIANT LOCKS: Compliant with OSHA's Lockout Standard designed to address safety standards.
  • TRUSTED LOCKOUT TAGOUT: Brady is a world leader in lockout/tagout products and services offering industry expertise and a broad range of durable, easy-to-use lockout devices.
Check Stock

Motorized Ball Valve- 1/4 Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid

  • SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- 1/4” Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch cuts off power after valve is fully open....
  • 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

Water Filter Float Ball Valve 1/4 Inch Adjustable Float Valve Plastic Water Tank Float Valves for Ponds, Water Pump, Water Trough, Aquariums, Aquaculture, Water Tank, Reservoir (4)

  • Size and material: you can connect float valves to the 1/ 4 inch supply tube, you can install an appropriate number of water float valves according to the size of the water tank to meet your needs in different situations.
  • The ball of the water float valve is made of PE material, the other parts are made of POM material, low temperature resistance and corrosion resistance, durable and non-toxic, can serve you for a long time.
  • Adjustable design: the plastic water tank float valves come with adjustable arms, when the water level of the water tank is low, the gate of the float valve opens to ensure that water can enter, when the water level rises, the ball of the water float valve and the adjustable arm will form a flat angle and close in this state, realizing the automatic adjustment of high water level and low water level.
  • Wide applications: the adjustable sink float valve can be applied for ponds, small water tanks, toilet storage tanks, household water purifiers, pools, aquariums, aquaculture, reservoirs, industrial and large water tanks, etc., if needed, you can choose to use multiple float valves at the same time, so that water can be input faster.
  • Easy to operate: the angle of the valve ball is adjustable, you can flexibly set according to the requir....
Check Stock

EZ-Fluid Plumbing 3/8-Inch O.D Female Compression x 3/8-Inch O.D Male Comp A Lead-Free Brass Quarter Turn Water Shut Off Straight Repair Add On Stop Ball Valve,Chrome For Kitchen,Bathroom Faucet 1Pc

  • EZ-FLUID Plumbing Chrome Brass Water Shut Off Valve, Straight Angle Stop Valve Use for Kitchen, Bathroom Faucet Water Valves and Toilet Water Valve.
  • Lead-Free Quarter Turn Ball Valve Straight Angle Stops 3/8-Inch Female O.D. Compression Captured Nut x Outlet: 3/8-Inch O.D. Male Comp w/ Brass nuts....
  • Fits on top of faulty valves to provide a shut off quick fix.
  • Lead free Chrome Finished brass approved product in all states.
  • Pack of 1 pc 1/4 turn straight add on angle stop repair water shutoff ball valve Approved By UPC, NSF.
Check Stock

LGOUW 8 Pieces Premium TR413 Tubeless Tire Valve Stems, Black Rubber Snap-in Tire Valve Stem, Universal for Tubeless 0.453 inches 11.5mm Rim Holes

  • Package content: you will receive 2 pieces of dually valve stem extenders, 6 pieces of metal valve stem extenders, and 1 piece of valve core removal tool, the sufficient quantity and complete combination can meet your daily demands.
  • Solid and sturdy: these valve stem extenders sets are mainly made of brass, aluminium alloy and rubber, with smooth and chrome-plated surface, and nice strength, not easy to rust, corrode or deform, offering a long service life, and the bottom of the extension piece rotates smoothly, which is easy to operate, convenient and efficient.
  • Suitable size: the straight valve stem extension measures about 6 inches in length, and the metal valve stem extenders are available in 3 different degrees, including 45 degree, 90 degree, 135 degree, the valve core removal tool features 2-size and 3-angle tips, suitable for most common tire valves.
  • Simple to apply: the valve removal tool can be applied to remove the old valve core, then insert the new valve core onto valve core tool and insert it into tire valve stem, then screw down until tight, will not take you too much time to complete the work.
  • Wide compatibility: this set of truck tire valve extension is well compatible with most cars, pickups, truck, ride on mowers, ATV, motorcycles, bic....
Check Stock

8 Pieces Inflatable Clear Glitter Beach Balls Confetti Beach Balls Transparent Swimming Pool Party Ball for Summer Beach, Pool and Party Favor (Blue)

  • ...e with good hand feeling, can be applied for a long time.
  • But be careful when inflating, and keep them away from pointed items, fire or heat resource.
  • Inflate and deflate easily: each confetti glitter ball measures approx. 12 inches after inflating, which can be blown up by adult and no air pump needed.
  • With a quick valve system that uses a pump or exhaled air, the ball can be easily inflated in seconds, and when you finish the day's activities, you can open the valve and let the extra air out, which is convenient to store and save space.
  • Applicable occasions: inflatable confetti balls are suitable for beach, pool, lake, park or backyard, during vacation, play beach ball with your friends and family, you can get funny time with this ball, spending the enjoyable time.
Check Stock

Stanbroil Fire Pit Gas Burner Spark Ignition Kit – Including Push Button Igniter Gas Shut-Off Valve with Key

  • Dimensions of the Face Plate: 7" L*3 13/16" H, Base Plate: 7" L*3 13/16" H.
  • Kit contains Chrome Ball Valve with 3” Chrome Key, Spark Ignitor with Leads &Ground Wire, Stainless Steel Mounting Plate.
  • Ball Valve: 1/2 Female NPT*1/2 Female NPT, we include Two 3/8" Male Flared x 1/2 NPT Fittings for Your Convenience.
  • Easy to install, Perfect for your DIY gas fire pit.
Check Stock