Best 35mm Nozzle

HYDRO MASTER 0179101 Universal Outdoor Misting System Calcium Inhibitor Filter (2 pcs)

  • [ Solid Brass Misting Nozzles and Plug ] The misting nozzles and the plug are mechanically carved from the brass rod. Each nozzle or plug contains a black gasket, good sealing..
  • [ 0.0197" Orifice (0.5 mm) Excellent Misting Effect ] The orifice of the misting nozzles and plugs is 0.5mm(0.0197"), so it will produce tiny and soft mist to make excellent cooling misting in hot summer. Diameter: 0.9cm(0.35"), Height: 1cm(0.39").
  • [ 10/24 UNC Standard Thread ] The thread of the nozzles and plugs is 10/24 UNC, and matches many kinds of tee connectors widely. Such as the 1/4" tee connector, 1/2" turn 1/4" tee connectors, standing misting nozzle connector and so on..
  • [ Product Included and Water Setting ] Product included: 10pcs mist nozzles and 2pcs mist plugs. Water Setting: 2-2.3GPH(us gal per hour), 0.2-0.6MPA. It's suggested to install less than 30pcs nozzles on one water line to make an excellent misting effect in common faucet/tap water pressure in the U.S..
  • [ Wide Range of Use in Hot Summer ] The nozzles are used in misting system to make cooling misting, the plugs are used to stop somewhere you don't want to mist some time. It's widely used to make outdoor cooling system, agriculture irrigation system, standing misting system, trampoline misting, de....
Check Stock

WINSINN 40mm Fan 5V, 3D Printer Micro 5 Volt Fans 4010 Hydraulic Bearing, Brushless Cooling 40mmx10mm 2PIN (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 5V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 5V, Current: 0.15A, Power: 0.75W, Speed: 5100PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

Tool Daily Short Pressure Washer Gun, High Replacement, M22 Thread, with 5 Nozzle Tips, 4000 PSI

  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer gun kit includes: 1-piece Pressure Washer Gun, 1-piece brass coupler, 1-piece Red Nozzle (0 Degree), 1-piece Yellow Nozzle (15 Degree), 1-piece Green Nozzle (25 Degree), 1-piece White Nozzle (40 Degree), 1-piece Brass soap nozzle tip (65 Degree)..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★ATTENTION: NOT FIT GardenHose or WaterHose. High replacement pressure washer guns works with electric or gas pressure washer..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer wand has M22 THREAD and 14 MM INNER CONNECTOR FITTING. If hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★1/4’’ standard quick connector. Connects any accessories with 1/4’’ plug to the gun. Such as nozzles tips, pivoting coupler, foam cannon, extension wand, surface cleaner, undercarriage cleaner, water broom. Safety trigger lock to prevent unintended operation..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ....
Check Stock

2Pcs Round Welding Nozzle Standard Weld Tip Plastic Hot Air Welder Cicular Stainless Steel(5mm) Fast Weld Torch Accessories

Check Stock

Cen-Tec Systems 92960 Central Vacuum Kit with Ct20Qd and 35' Dc Hose, Direct Connect, Black

  • Compatible with major brands of central vacuums installed with industry standard direct connect wall inlets.
  • Central vacuum replacement package of the three most replaced components including a premium power nozzle, fully integrated electric telescopic wand, and 35 foot total control electric hose.
  • The 14" wide CT20QD power nozzle has a chevron agitator design shown to provide superior cleaning performance.
  • 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle.
  • A soft cotton blend hose sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose.
Check Stock

Paint Sprayer, Airless Paint Sprayer, High Power HVLP Spray Gun with 3 Nozzles Needle Cap Spray Gun, Spray Paint Gun for Furniture, Fence, Car, Boats, Bicycle, Garden Chairs, 600ML Paint Capacity

  • 【High Capacity HVLP Spray Gun Kit】This is a HVLP paint spray gun with 600ml capacity great for furniture surface, car primer, painting,wall painting, art craft, automotive paint, base coatings, meet most of your scenarios..
  • 【3 Nozzle and 3 Needle】In order to achieve the effect of spraying, we will give three additional replaceable 1.4mm 1.7mm 2.0mm nozzle needle caps in this hvlp spray gun set, you can change different nozzle sizes in different painting projects with different needs, which can fully meet your needs, which will make your work more efficient..
  • 【Adjust the Flow Rate】 High atomization gas pipeline design, come with three adjustable valve knobs for precise coating applications,which have good atomization effects and fast decorative effects. It sprays most types of finishes on evenly and without brush marks, suitable for edges, corners and broad interior surfaces of various work and DIY projects..
  • 【Premium Quality】 Materials of the needle and nozzle of the HVP spray gun are made of high-quality stainless steel, which is sturdy and durable, can be used for a long time, wear-resistant and scratch-resistant.Professional gravity Feed HVLP Spray Gun with 3 fluid Tips 1.4mm, 1.7mm, 2.0mm. Allowing you to paint for a nice wide spectr....
Check Stock

INCREWAY 3pcs Silicone Heater Block Cover High Temperature Resistance Silicone Socks for V6 E3D Printer Extruder Hotend,Black

  • Size of Heater Block: 20*16*12mm. Inner Hole for Heater Tube: 6mm, for thermocouple/ thermistor: 3mm.
  • High Quality Material: Made of solid aluminum material with sandblasting oxidation treatment, durable in use.
  • Inner Hole: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
  • Nozzle: Suitable nozzle: M6 Screw thread and it works perfect with nozzle and nozzle throat.
  • Application: Accept Nozzle with M6 screw thread for Reprap.
Check Stock

Iwata Eclipse HP-CS Airbrushing System with Silver Jet Air Compressor

  • Dual-action gravity-feed airbrush with a 1/3 oz. funnel shaped cup.
  • This airbrush has a unique 0.35-mm needle and nozzle combination for fine-detail spraying.
  • Iwata Silver Jet Air Compressor features a working pressure adjustable from 10-18 psi.
  • Perfect for cosmetics, tanning, hobbies/models, fingernail painting, bakery and general airbrushing.
  • The Silver Jet includes: Coiled Airhose and Pressure Adjustable Knob.
Check Stock

TAMIYA Spray-Work Hg Trigger Type Air Brush System

  • Extra-Fine Brush x1 (Brush: 12mm length x 2mm dia..
  • total length: 100mm). Features durable PBT bristles and an easy-to-handle stainless steel wire stem. It's ideal for cleaning narrow spaces such as the airbrush nozzle..
  • Standard Brush x1 (Brush: 12mm length x 7mm dia..
  • total length: 100mm). Utilizes PBT bristles and a stainless steel stem with grip. Efficiently cleans the paint cup after use..
  • Sealant tub x1 (Contents: 3g). The sealant ensures that air does not escape from any gaps at the base of the nozzle. It does not solidify, allowing cleaning and reapplication as necessary..
  • High-viscosity grease tub x1 (Contents: 7g). This grease is for use in maintenance of the trigger button stem, its viscosity ensures smooth and controlled movement of the trigger and paint application..
  • Nozzle wrench x1. This wrench is compatible with all Spray-Work series airbrushes, and is used to remove the nozzle without damage..
Check Stock

Orbit 10106H Misting Nozzle

  • * Material: A Filter on your mist system, features a sturdy brass body with stainless steel orifice, not rust, durable. Minimal water use of 1/2 gallon of water per hour per nozzle..
  • * Thread size: 4mm(diameter)*5mm(length) , Total length 24.8mm. Note : this is a high Pressure mist nozzle, the Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min..
  • * Wide Appliacations: It can be usually used for a wide range of occasions such as garden, balcony, villa garden sprinkler irrigation.
  • Perfect for landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification..
  • * There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be sprayed in network, good for filtering systems ..
  • * Item contains 10 pcs Brass Misting Nozzles, Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage..
Check Stock