Inland PLA PRO (PLA+) 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Natural
PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PLUS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA PLUS FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, a....
4 WOOD PLA FILAMENT BUNDLE - 4 different wood PLA filament with Walnut wood, Red wood, Bamboo and Ebony wood, each filament spool is 200g..
REAL WOOD/BAMBOO FIBER - There is 20% wood fiber in the walnut wood, red wood and ebony wood PLA Filament. The light color wood has 20% bamboo fiber. Therefore, you will get a print like a real wood with matte face and even wood smell..
REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - White
PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Olive Green
PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Black
PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament Bundle
A 3D Printer accessories combo - 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Filament Specs: Olive Green - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
JAYO PLA+ 3D Printer Filament, PLA Plus Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool Printing Material fit for FDM 3D Printers, PLA+ White
【Toughness Plus】Compared with PLA filament, JAYO FDM 3D PLA+ Filament has better toughness, higher strength, lower shrinkage and lower warping, meeting your demands for different printing projects and bringing you a high quality printing experience.
【No Clog & Bubble】JAYO PLA+ filament material has the advantages of no clogging and no bubble, thanks to dry for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag. It can make your 3d printing objects more delicate.
【Dimensional Accuracy & Tidiness】JAYO 1.75mm PLA+ filament has high precision on diameter 1.75 mm (dimensional accuracy +/- 0.02 mm). With tidy line and good winding, you will get a extremely smooth printing.
【Printing Setting】The recommended of our PLA+ consumable printing at a nozzle/extrusion temperature is 210°C - 235°C and bed/platform temperature is 55°C - 65°C. Under the temperature, it can melts welll and print perfectly.
【Stable Printing Quality】PLA+ 3D printing filament has strong layer adhesion, melts well and feeds smoothly constantly without clogging the nozzle, bringing you a stable and good 3D printing. You will be immersed in the pleasure printing.
【Wide Compatibility】JAYO PLA+ 1.75mm printing material is compatible with mos....
3D Pen Filament Refills, 20 Colors, 16 Ft Per Color, 3D Printer PLA Filament 1.75 Mm, Smooth Printing Refills for Kids and Adults
[ 20 COLORS PACK ] --- Our 3D printing PLA filament is made of 100% eco-friendly PLA material, including 18 solid colors, 1 fluorescent color and 1 metallic color, providing you more creative choices..
[ SAFE AND HIGH QUALITY ] --- Compared with ordinary ABS filament, this PLA material filament is non-toxic, environmentally friendly, more vibrant colors, no bubbles, and fast molding, making it an excellent choice as a gift for children..
[ WIDELY COMPATIBLE ] --- 1.75mm universal filament is widely compatible with various 3D printing pens and 3D printers. Tip: Not compatible with 3Ddooler Pen with 3.0mm filament..
[ EASY to PRINT ] --- PLA filament uses a print temperature range of 320°F-428°F, allowing for fast molding without cracking or bubbling and won't clog the output port, giving you a better product experience..
[ WHAT YOU GET ] --- Quality product warranty, 24-hour response time, 100% satisfaction guarantee. The kit comes with 2 silicone finger covers and a 3D printing drawing guide to help you and your child get started with 3D printing more easily..
YOUSU PLA Plus (PLA+) 3D Printer Filament Black PLA Filament 1.75 mm Accuracy 0.03mm 1 kg (2.2 lbs), 3D Printing Filament for 3D Printer & 3D Pen.
【High toughness PLA filament 】 - Formula improved to be up to 5 times tougher while retaining all the normal PLA filament advantages: excellent adherence, no warping, beautiful finish quality, and broad compatibility..
【Dimensional Tolerance +/- 0.05mm】Yousu PLA+ 3D printer filaments are produced with more precise specification. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, less stringing,.
【Tangle Free & No Plugging】Yousu PLA plus filament has total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle..
【High Compatibility】Compatible with Most of FDM 3D Printers, such as: Prusa, MakerBot, UltiMaker, Ender 3, Simplify3D, Flashforge, etc..
【Vacuumed Sealed Packaging】Filament Net Weight: 1KG.Yousu filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at a good condition to be printed..
