ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Red) Bundle
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Red.
Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
Large Build Volume & Fine Printing: The printing build volume of Anycubic Kobra Plus is 2.5 times larger than Anycubic Mega S. 300*300*350mm printing size to satisfy all your 3D printing needs. Equipped with Double thread Z-axis moving construction. Anycubic Kobra Plus can minimize the shaking, ensurig more model details can be restored. It is also the cornerstone to ensure high printing speed..
Component Upgrades to Achieve Creative Freedom: Equipped with an all-metal geared extruder, which heats up and melts the filaments quickly, ensu....
3D Printer Filament PLA-Meta 1.75mm, SUNLU Upgraded 3D Filament for 3D Pen&3D Printer PLA Meta, High Fluidity, No Clogging, High-Speed Printing, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, Black
【Good printing effect, 100% Bubble-Free】- New upgraded Universe series 3D printing filament PLA-Meta strictly guarantees neat lineup, no knotting, strictly guarantees ±0.02mm wire diameter difference, 100% zero bubbles. Ensure high efficiency printing, say goodbye to plugging..
【Good fluidity, Strong resistance】- SUNLU 3D filament PLA-Meta is 1.5 times more fluid than ordinary PLA, About 1 times stronger than ordinary PLA and PLA+ in terms of impact resistance. The smoothness of the material discharge is excellent, reducing plugging, and the printed models are resistant to dropping..
【Lower printing temperature, lower consumption】 - PLA meta filament melting point is 155℃-170℃, Recommended printing temperature is 180℃-200℃, lower than PLA 3D printing filament. Lower melting point and printing temperature, means more energy saving, reduce printer loss and extend the life of 3D printer. It can also greatly reduce clogging, drawing, and ensure stable feeding and stable printing..
【New hue, Good Glossiness】- SUNLU upgraded 3D filament has a new hue to give you a new visual effect. PLA-Meta filament has good adhesion and super strong interlayer bonding, and the surface of the consumable has good glossiness, soft color and warm color,....
FLASHFORGE Guider IIS 3D Printer, Auto Leveling Printer with 300℃ High Temp Nozzle, 3D Printer Built-in HD Camera, Large Print Size Printing Size 280 * 250 * 300mm for Industrial Use
...BS, PETG, PC, PA, Nylon, and other industrial-grade filaments. Build volume 280*250*300 mm, layer resolution 0.1-0.4 mm, print resolution ±0.2 mm, print speed 10-100 mm/s..
【OPEN FILAMENT SYSTEM AND FILAMENT DETECTION】 - Compatible with 99% FDM 1.75mm filaments. Cease printing when filament uses up or is interrupted. 5-inch touchscreen, streamline 3d print operation, save time and strength for volume production jobs. One spool of random filament is included (1000g)..
【RESUMES PRINTING AND SLICER SUPPORT】 - Flashforge 3D printer resumes 3d print job when power recovers. No worry of sudden power off and filament waste. FlashPrint offers basic 3d model slicing features and advanced options such as editable support structures..
【BUILT-IN CAMERA AND CLOUD PRINTING】 - Monitor 3d printing process remotely via WiFi and Cloud. Control multiple printers on the cloud, greatly improves printing efficiency..
【HEPA13 AIR FILTER AND POWER CONSERVATION】 - Flashforge Guider iis effectively filters out fine dust produced when printing industrial 3d filament. Turn off the light bar t....
32 Colors 3D Printing Pen 2.85mm PLA Filament Pack, Each 0.3 Meter, Each Color 5pcs, Total 160 Pcs 48 Meters PLA Refills, Fit for 3Doodler Create 3D Pen, with Extra 2 Silicone Finger Caps by MIKA3D
Suitability: Support For 3Doodler Create 3D Printing Pen Very Well, Support For 3Doodler Pro 3D Printing Pen Very Well.
Unique 32 Colors: This Refills Assortment with 4 Metallic Colors, 10 Clear Colors and 18 Most Popular Solid Colors.
These Various Colors is Best Choice for All 3D Drawing and 3D Art, It's Great Gift for 3D Printing.
High Quality: Our PLA Filament Refills with Precise Diameter Tolerance Controlled, Vacuum Package, No Bubble, Eco-Friendly, Printing Smooth for 3D Pen.
Extra Gift: 2 Silicone Finger Caps, It Support You to USE 3D Printing Pen Much More Safe and Easily, It’s a Great Start Kit, Fit With MIKA3D Silicone 3D Pen Drawing Mat Perfectly.
Service & Warranty: We are Confident about our PLA Filament Refill Quality, Within 24 Hours Response, If any Question, Pls kindly Inform us, We’ll do our best for you.
PVA Glue Stick 3D Printing, FYSETC 3D Printer Parts 3Pcs Solid Adhesive for 3D Printer Ender 3/ Ender 5/ CR10 / Prus Mini MK52 MK3 Hot Bed Print Filament PLA Glass ABS PETG CPE
Wide Compatibility: Work well on all 3D Printer hot bed, including spring steel build plate, aluminum or glass bed, PEI sheet, 3d printer stickers etc..
Convenience: Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water..
Help in 3d printing: Paste it on hot bed beforce printing, strong adhesion to the hot plate, perfect first layer. It is easier to remove the printing models..
High-quality and Long-lasting: last for 100+ average prints, helps 3D print parts adhere to the build plate during printing..
Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
Entina X40 IDEX 3D Printer, Independent Dual Extruder 3D Printer with TMC2208 Silent Driver, 4.3' Touch Screen, PEI Spring Steel Magnetic Platform, Built-in Camera, Wi-Fi Cloud Printing 300x300x400mm
【Independent Dual Extruder 3D Printer】The X40 idex 3d printer is designed with independent dual extruders that supports 4 printing modes: single nozzle printing.
duplication mode printing and mirror mode printing. You can print two different types materials and colors model, or print two same models at the same time..
【Large Build Volume】Ultra-large forming volume allows you to print single model up to 11.8"(L) x 11.8"(W) x 15.7"(H) / 300 x 300 x 400mm, which provide enough space for your 3d printing creation, give you greater freedom to print. The large 3d printer with dual extruder can use PLA, ABS, TPU, PVA, PETG, HIS, Nylon, Wood, and Metal..
【Auto Leveling & Super Silent】X40 dual extruder 3d printer equipped with intelligent leveling system, which can automatically compensate for the printing height of different points of the hotbed, friendly use for both expert-level and beginners. 32 Bit motherboard with TMC2208 silent driver provides a quieter printing at less than 50db noise level..
【Build-in Camera & Wi-Fi Printing】Our big 3d printers X40 equipped with Wi-Fi chip and built-in camera that helps to keep an eye on prints in case of incorrect settings, and helps to pause or abort printing via Wi....
ELEGOO 3D Printer Neptune 2 FDM 3D Printer with Silent Motherboard, Safety Power Supply,Resume Printing and Removable Build Plate, Impresora 3D with 220x220x250mm Printing Size
【Filament Detection】Aries is equipped with a filament runout sensor. Running out of filament during printing no longer ruins a job, your print will pause until you load the filament and resume. Aries 3d printer with 4.3in colorful touch screen, simply click the touch screen to achieve precise printing, giving you a better 3D printing experience!.
【Industrial Structure】Aries follows the Creator and Guider design concepts and has an outstanding industrial structure, which it’s different from DIY 3D printer structure. It is more stable and accurate when you print large models, the printing size is 200×200×200mm..
【Intimate Design】LED lights design illuminates your printing field of vision, allowing you to easily monitor your printing work. Double Z-axis driver ensures more stable and more precise printing quality. Resume printing after power outage or other unexpected stoppage..
【Out of Box to Print】Enjoy 3D print fun right out of the box. After unboxing, you can start printing in just 3 steps: 1, Install glass build platform. 2, Assemble filament spool. 3, Insert the filament to extruder ptef tube..
【After-sale Service】All Voxelab 3d printers are provided lifetime technical assistance. If you have any questions regarding product ope....
ANYCUBIC Kobra 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Silk Silver) Bundle
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm.
Upgrade Auto Leveling: ANYCUBIC Kobra is one of the very few 3D printers that has auto leveling feature, the intelligent Anycubic LeviQ Leveling Function equipped with 25-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate.
Fast Printing & Large Printing Size: ANYCUBIC Kobra 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.66x8.66x9.84in / 220*220*250mm, which has enough space and freedom to realize your fantastic creativity..
Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision..
Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost..
ANYCUBIC Kobra 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Black) Bundle
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm.
Upgrade Auto Leveling: ANYCUBIC Kobra is one of the very few 3D printers that has auto leveling feature, the intelligent Anycubic LeviQ Leveling Function equipped with 25-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate..
Fast Printing & Large Printing Size: ANYCUBIC Kobra 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.66x8.66x9.84in / 220*220*250mm, which has enough space and freedom to realize your fantastic creativity..
Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision..
Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost..
ANYCUBIC Kobra 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Blue) Bundle
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Blue.
Upgrade Auto Leveling: ANYCUBIC Kobra is one of the very few 3D printers that has auto leveling feature, the intelligent Anycubic LeviQ Leveling Function equipped with 25-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate..
Fast Printing & Large Printing Size: ANYCUBIC Kobra 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.66x8.66x9.84in / 220*220*250mm, which has enough space and freedom to realize your fantastic creativity..
Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision..
Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost..
