Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System
Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)
Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
KZYEE KT60 Digital Timing Light, LED Display 12V Automotive Ignition Timing Light for 9V-16V Ignition System Strobe Lamp Detector, Portable Timing Check Auto Vehicle Motorcycle Marine Repair Tool
[DIGITAL DISPLAY PANEL] The KT60 timing light is a digital model with indicator lights and a LED screen. The four buttons let you switch between 4-stroke and 2-stroke, display the RPM and ignition angle, and easily increase or decrease the ignition angle. You can use it to measure the engine RPM and adjust the ignition timing. This trigger activated timing provides accuracy up to 8,000 RPM, the digital display allows you to easily diagnose and make precise adjustments..
[COMPATIBLE WITH 2-STROKE OR 4-STROKE ENGINES] Works with both 2-stroke and 4-stroke Pestrol engines. Easy-to-use button saves you a lot of work adjusting different engine types in the store. Works on 6 and 12 volt vehicles (6 volt operation requires a separate 12 volt car battery for power)..
[BRIGHT XENON LAMP] This automotive timing light is equipped with a xenon flash tube as well as a focused Fresnel lens. It lights in sync with the spark plug ignition and the ignition scale is intuitive to see even in bright daylight..
[HIGH IMPACT ABS HOUSING] Rugged ABS, durable housing that is shock resistant and can withstand daily use. It is a lightweight timing gun that is simple, easy to use and highly efficient for fine-tuning your timer to maximize the efficiency of your engine..
【Powerful & Stable 4 Stroke Engine】Good quality 110cc reliable 4-stroke engine designed to prevent overheating.There will be no worries about overheating or extra engine maintenance with this ATV..
【Upgraded Swing Arm and Spindle】Spindle assembly has been upgraded to Steel Casting with better quality and more durable, hard to break..Swing arm is with adjustable tie rod end..
【Free Upgraded Flexible Turning Radius】2.25 meter Min Turning Radius, 30% less than competitor's: flexible turning and convenient operation. Safe and easy operation control designed for young riders..
【Remote control and Speed governor for Safety】Wireless remote cut off switch + speed governor on the right side handle bar. This is a must need for all parents!! You can watch your children ride and cut off the engine from up to 20m away. You will also be able to limit the speed to as low as 5km/h and increase the speed as your child grows into the quad and becomes more comfortable! Which parents wouldn't want that?.
Yoursme Injection Pump Gear Puller Removal Installer Tool & Engine Barring/Rotating Tool for Cummins and Dodge Engines
APPLICATION: Injection Pump Gear Puller works on Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT. Engine Barring/Rotating Tool works on Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
SUPER MATERIOR: Made from high standard 42CrMo steel with Black Finish, resisting rust and impact, Great Strength and Durability, ensures reliable long-term service..
USE INSTRUCTION： Injection Pump Gear Puller--Used to remove the injection pump gear with ease and fast. Engine Barring/Rotating Tool--Just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
PACKAGE INCLUDE: 1PC Injection Pump Gear Puller with two heavy duty flange bolts.
Satisfaction Guarantee: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months’ Warranty. If you have any problems about our products, please feel free to contact us..
TFCFL 6HP 2-Stroke Electric Outboard Motor,Heavy Duty Outboard Motor Boat Engine Water Cooling CDI System, Tiller Control, Inflatable Fishing Boat Engine,Short Shaft 40cm,4.4KW
【High Performance Motor】 The outboard boat motor using 6 HP 4 stroke strong power high quality with friendly price.Max. Output: 6.0HP.
【Air Cooling CDI System】This outboard boat motor is equipped with its own patented engine air cooling system, allowing you to fish all day without overheating. Features 360 degree steering rotation for reverse without gear shifting..
【Durable and Safety】Vertically installed engine design can improve power, performance and durability, high-quality carbonation system with ignition bulb can improve efficiency, twisting the throttle handle and engine stop button to improve Responsive, excellent outboard anti-corrosion system and anodes to improve durability.
【6HP 4 Stroke Outboard Boat Motor】Air cooling technology To improve the reliability of the whole machine. Convenient use and easy operation, travel safer, more reliable, more corrosion resistant, more beautiful, more durable, more energy efficient, more environmentally frien....
