Best 4 Ton Jack

K Tool International 22 Ton Blue Air Hydraulic Truck Jack Welded Pump Wiper Seal on Ram 3 Adaptors Air Pressure 100-120 PSI KTI63197

  • [22-TON CAPACITY] - K tool International hydraulic jack rated to lift up to 22 tons or 44,000 lbs..
  • [TRUCK JACK SPECS] - Minimum Height: 8 2/3".
  • [WIPER SEAL] - Wiper seal on the ram for longer life in extreme environments.
  • [RELEASE KNOB] - Release Knob At the Top of the T Handle Works At Any Handle Position. 3 handle positions allows for easy storage and jack positioning.
  • [STRONG/DURABLE] - Heavy duty truck jack has a welded pump and reservoir for added strength and durability. Heat treated extension screw for extra....
Check Stock

BILT Hard Aluminum and Steel Floor Jack, Low Profile Hydraulic Racing Floor Jack with Dual Piston Rapid Pump, 1.5 Ton Capacity (3,000 lb) , Blue

  • Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant..
  • Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground..
  • Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it..
  • Rapid Pump: The high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for con....
Check Stock

ZAISHANG Electric Car Jack 5T Hydraulic Floor Jack DC 12V Car Jack Kit with Electric Impact Wrench, Car Lift Emergency Tire Change

  • [Efficient Electric Car Jack Kit] 5 Ton electric car jack and electric impact wrench all in one tool case, meet all your needs of changing a tire..
  • [Fast and Convenient] Powered by cigarette lighter or car battery, fully auto, lift a car in one minute, save time and energy compare with manual car jack. Can also be connected to a 110v to 12 v DC power converter..
  • [Powerful Car Jack] This car jacks have a maximum lifting weight of 5 tons (11000 lbs) and a lifting height range of 6.1 to 17.7 inch. Suitable for most vehicles under 5 ton, Sedan, SUV, MPV, Truck etc..
  • [Electric Impact Wrench] This electric car jack kit includes a 1/2 inch portable electric impact wrench with two socket adapters with four sizes, matching most vehicles. Max torque 420 N.M. Helps quickly remove tire screws.
  • [Higher Stability and Safety] Car jack will automatically stop lifting after reaching the height limit and has self-locking function to protect car not fallen-down during use if cut-off power..
Check Stock

EAMBRITE 12V DC Heavy Duty 4.5 Ton(9900lb) Hydraulic Car Floor Jack with LED Light for Car, SUV and RV

  • [Rated Capacity] 4.5 Ton (9900 LBS) with lift range 8 inch to 20.2 inch..
  • [Built-in Safety Valve] Equipped with self-locking structure, jack can keep current height even out of power by accident..
  • [Power Supply] Powered by cigarette lighter or car battery. 11.5 ft cord will be long enough to reach all 4 tires of the car or SUV..
  • [Easy to Operate] 2 kinds of switches ---Vertical Lift Control Switch and LED Light Switch. Press the lift control switch to make the electric jack lift up and down. Build-in front flashlight is for easy positioning..
  • [Portable Jack] This hydraulic jack is space-saving for its small size. So it can definitely be the perfect company as a roadside emergency jack along your car journey. Also nice gift for the coming Father’s Day..
Check Stock

BIG RED T82040 Torin Hydraulic Trolley Floor Service/Floor Combo with 2 Jack Stands and Rolling Garage/Shop Creeper, 2 Ton (4,000 lb) Capacity, Red

  • Two heavy duty 2-ton jack stands with quick adjustment mechanism and double locking pawl.
  • 2 ton trolley jack with safety overload feature has 360 degree swivel casters and rotating heavy duty saddle.
  • Trolley jack lifting range is 5.6 to 13 inches.
  • 2 piece creeper with an all steel construction frame features 6 wheel durable rotating casters, and includes padded bench.
  • Factory tested for reliability and safety.
Check Stock

US JACK D-51126 20 Ton Bottle Jack Made In USA

  • OTC's 8-Ton Bottle Jack features a rugged forged cylinder and base to ensure strength and prevent leaks, along with a chromed pump piston and ram for additional rust resistance.
  • In-line design (pump mechanism centered on the cylinder) makes the jack much easier operate and manuever into position with the handle compared to offset designs.
  • Specifications include: 4-15/16 inch long stroke, 7-13/16 inch minimum retracted height, 15-3/4 inch maximum height with screw extension, 3 inch long screw extension.
  • 1-3/8 inch diameter saddle, 3-9/16 inch x 6 inch rectangular base.
  • OTC bottle jacks will provide years of reliable service, but eventally time and use will require new seals so every OTC bottle jack includes a free, life extending, seal kit.
Check Stock

TEMCo Hydraulic Container / Machine Toe Jack (2.5 Ton - 5 Ton) Lift Capacity TH0025

  • 2.5 US TON Lift Capacity from the Toe, 5 Ton Lift Capacity at from the Top of the jack..
  • Lowest Minimum Jacking Clearance 0.7 Inch..
  • Machined Cylinder Housing improves the quality of the jack - Compare to traditional stamped sheet metal cylinder housing..
  • Over Travel Protection eliminates damage to internals from over-extension of piston..
  • Hard Chrome Ram resists corrosion and maximizes seal wear life. 5 Year Warranty..
Check Stock

VEVOR Hydraulic Long Ram Jack, 3 Tons/6600 lbs Capacity, with Single Piston Pump and Clevis Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Black

  • Handles up to 3-Ton/6600 lbs: This 3-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 26" -45.7" Lifting Range: Minimum height: 26 in/66 cm. Maximum height: 45.7 in/116 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 3 ton/6600 lb. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. Clevis style base allows the jack mounts directly onto most shop cranes. And the glide-action pressure pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade steel an....
Check Stock

OTC LDJ3 3-Ton Service Jack

  • OTC's LDJ3 3-Ton Service Jack features rugged steel construction, with a flanged upper body edge that increases strength to resist twisting, and is....
  • Light, compact design makes this jack easy and convenient to use when positioning under a vehicle and lifting.
  • Built-in safety overload system prevents use beyond the rated capacity for safer operation.
  • Dual pump design lifts 1,750 lb. (800kg) load to 19 inches in just 3 pumps.
  • Cycle tested design ensures a long life of professional duty.
  • Features: 5-3/4 to 18-1/2 in. lifting range, 63.9 in. reach, 4 in. diameter steel crown saddle, 6.3 in. frame height, 39-1/2 in. handle, 3.5 in. fixed....
Check Stock

BEETRO Electric Car Jack 5 Ton 12V Car Jack Hydraulic Kit with Inflator Pump, Electric Jack for Car Sedan MPV Tire Changing, Lifting Range 6-17.7''

  • 3-in-1 DESIGN : BEETRO electric hydraulic jack has 3 functions, 5 ton hydraulic jack, tire inflator pump, and built-in flashlight, meet your needs of change tire or pump up the tire in emergency. Suitable for most vehicles under 5 ton, Sedan, SUV, MPV, Truck etc. It is an essential good helper for garages, farms, highways, long-distance travel, or emergency roadside tire replacement..
  • RATED CAPACITY : This car jacks have a maximum lifting weight of 5 tons (11000 lbs) and a lifting height range of 6 to 17.7 inches. Tire inflator provides 35 L/min air flow rate. It is easy to use and just takes about 2 minutes to reach maximum height, let you quickly and easily finish repairing. Perfect for car’s owner, especially best choice for women..
  • UNIVERSAL POWER SUPPLY : It can be connected to cigarette lighter power outlet or car battery, and has a long 11.5 feet power cord so you can place it by the front or rear tire . Also,It comes with build-in flashlight, and drop-proof tool box,don‘t worry about working at night or missing accessories. The red triangle on the surface of tool box can be used as a warning road sign when repairing on the highway..
Check Stock