Best 45 Degree Chamfer Wheels

Williams OES-0607 Short Double Head Open End Wrench, 3/16 by 7/32-Inch

Two openings in each wrench with 45° chamfer on wrench ends allow easy placement of wrench on the fastener.
Continuous arc design minimizes spreading and is stronger than “V” design.
Satin chrome finish provides good grip and cleans easily.

... surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

12" Resaw | height: 70 1/4" 21 1/2" X 16" | table height: 38".
7Degree table tilt left | 2 x 4" Dust ports | blade length: 115" | cast iron wheels.
Magnetic starter | dual light mount | 45Degree table tilt right max. | blade width: 3/4" | pyramid-shaped spine.
Min. Blade width: 1/8" | Footprint: 17 1/2" X 22 1/2" | Quick release tension | magnetic blade guard.
Laguna Ceramic Guides | Hi/Low aluminum Fence | Worm Gear Rack & Pinion | Massive Cast Trunnion 8"X13".

STURDY PEDAL HOOK: You can stack multiple bikes on the wall, instead of hanging 2 bikes, you can hang 3 bikes on the same size of wall at the angle of 45 degree. Max loading weight: 20kg or 45 lbs..
NO TUNING HANDLEBAR: The wheels are siting again the wall. So no more turning handlebar or wheels which could be accidentally knocked..
QUALITY: The hook is made of high quality heavy duty steel. The hook is also rubber padded to protect the pedal. The included screws are good quality too. Safer than other types: Pedal hook installed lower than normal bike hook..
EASY TO INSTALL: Easy installation, all screws and anchors are included, you can mount this hanger on brick, wood stud, or even on a drywall with particular anchor. Please watch the VIDEO in the listing for more details. Weight: 260g (0.57 lbs).
ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty! Made in Taiwan..

The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.

Adjustable Height & Angle - The height can be adjusted from 26.3"-45.3" and the angle of the front board can be adjusted for 45 degree, which can help....
Flexible Moving & Multifunctional Uses- with the high-quality lockable wheels, it can move freely in office, at home or school, wherever you need it....
Sturdy & Robust - Our standing desk is sturdy enough to hold more than 2 monitors and keyboards with its solid and high-quality steel frames and MDF....
Fashionable & Modern - The 31.5" L x 23.6" W x (26.4"-45.3") H standing laptop desk features fashionable appearance and modern design, so this height....
Easy Assembly & 24H customer service - As the direction and all the required accessories will be included, the assembly is very easy. If you have any....

2 Pc Solid Precision 30-60-90 Degree Angle and 45-45-90 Degree Angle Plates.
45 degree angle plate size: 3'' x 3'' x 4-3/8".
30 degree angle plate size: 4'' x 3-15/32'' x 2".
High Precision: +/- 20 Seconds, 0.0001" per inch.
Set contains two angle blocks: one 30°-60°-90° degree block and one 45°-45°-90° degree block.

SCREWS INCLUDE AND HEAVY DUTY:360 degree rotation to facilitate rotation at any angle,Heavy duty: can withstand a single 550lb, a total of 2200lb weight.
SAFETY:The 4 wheels have brakes,ensuring the safety of people and goods at any time and at any angle.
CAPACITY:550lbs each. Plate Size:3.74" (95mm) x 2.6" (66mm).Hole center to hole center:2.93" (74.5mm) x 1.8" (45mm). Mounting hole dimensions: 0.33" (8.5mm) x 0.46" (11.9mm).
Wheel Dia.:5" (125mm). Wheel Width: 1.25" (32mm). Wheel Material: Polyurethane. Overall Height: 6.18" (157mm.
WARRANTY:2 years warranty, quality problems, only change, no maintenance.

The 45 degree sights,45 degree flip up sights is made of high quality aluminum alloy processing, non-rust black anodized finish，excellent performance, light and durable..
45 degree offset flip up sight,45 degree flip-up front and rear sights with red and green dots compatible with most Picatinny rail and Weaver rails..
Both left-handers and right-handers could use the 45 degree sights freely and easily. 45 Degree Sights with Low-Profile Design makes transitioning from optical to iron sights simply..
This offset sights 45 degree can quickly transition between iron sights and scopes. Fully adjustable for Windage. Spring load push button with flip-up design, allowing for quick deployment and adjust the deployment according to your needs..
This 45 degree offset fip up iron sights has a Low-Profile design. It won't take up too much space or Interfere other accessories when It's flipped Up. These angled sights work perfect as a backup sight and give you a double assurance..