Best 48re Low Stall Torque Converter

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Michigan Motorsports Valve Seals

  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.
Check Stock

ONNURI For 2007-2012 Nissan Sentra 2.0L w/AUTO CVT Motor & Trans Mount Set 4pcs : A4348, A4345, A4318, A4346 - K2304

  • Precisely engineered frictional characteristics outstanding anti-shudder performance in CVTs equipped with torque converter.
  • Exact frictional properties provides superior performance in demanding, high torque applications.
  • Provides superior deposit control and protects metal surfaces from rust and corrosion.
  • Advanced anti-wear technology provides maximum protection to belt and pulleys.
  • Precisely engineered formulation provides excellent viscosity control minimal viscosity loss due to shearing, outstanding low temperature fluidity, enhanced lubricant film strength at high temps.
Check Stock

ZOSKAY servo 6V 20kg/0.09S High Speed Servo DS3218 PRO Waterproof High Torque Metal Gear Standard Digital Servo for 1/8 1/10 Scale RC Cars (Control Angle 270)

  • Stall Torque (5V): 21 kg/cm (291.5oz/in), Stall Torque (6.8V): 23.5 kg/cm (326.2 oz/in),Speed : 0.12 sec/60°(5V) / 0.09 sec/60°(6.8V).
  • standard servo size:40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in) Compatible with 1:10 and 1:8 scale Crawler/Buggy/Truck RC Car, mechanical arm, Quadcopter Drone and other remote control equipment..
  • High speed stainless steel gear ,accuracy and service life has been greatly increased Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots..
  • Waterproof performance: IP66 any application where waterproof standard servos are used.
  • High precision potentiometers and High-resolution digital chip, stable performance, strong anti-interference ability, fast response, high precision, control is more delicate and smooth operation..
Check Stock

SunFounder Metal Gear Digital RC Servo Motor High Torque for Helicopter Car Boat Robot Compatible with Arduino AVR Toys Drone Fix-Wing Airplane

  • Metal Gear Servo with a brushed DC coreless motor inside, making quick response, strong adaptability, and low electromagnetic interference..
  • Stall Torque: 12 kg/cm(4.8V), 15kg/cm(6V).
  • Supports voltage control in bipolar driver mode. Suitable for 16 Years Older..
Check Stock

AmpFlow A28-150 Brushed Electric Motor, 12V, 24V or 36 VDC, 6000 RPM

  • Measures 3.0 inches diameter (77 mm) by 4.0 inches long (102 mm).
  • Can be used with voltages ranging from 12V to 36VDC.
  • Maximum power: 2200 watts (3.0 horsepower).
  • Maximum stall torque: 14 Nm (1970 oz-in).
  • Peak efficiency at 24V: 80% at 40 amps and 5500 RPM.
  • Power and torque at peak efficiency: 770 watts (1.0 horsepower) and 1350 mNm (190 oz-in).
Check Stock

AmpFlow A28-400 Brushed Electric Motor, 12V, 24V or 36 VDC, 4900 RPM

  • Measures 3.0 inches diameter (77 mm) by 6.7 inches long (170 mm).
  • Can be used with voltages ranging from 12V to 36VDC.
  • Maximum power: 3200 watts (4.3 horsepower).
  • Maximum stall torque: 25 Nm (3560 oz-in).
  • Peak efficiency at 24V: 83% at 50 amps and 4500 RPM.
  • Power and torque at peak efficiency: 1000 watts (1.3 horsepower) and 1350 mNm (300 oz-in).
Check Stock

AmpFlow E30-400 Brushed Electric Motor, 12V, 24V or 36 VDC, 5700 RPM

  • Measures 3.1 inches diameter (78 mm) by 5.8 inches long (147 mm).
  • Can be used with voltages ranging from 12V to 36VDC.
  • Maximum power: 1580 watts (2.1 horsepower).
  • Maximum stall torque: 10.6 Nm (1500 oz-in).
  • Peak efficiency at 24V: 79% at 29 amps and 5100 RPM.
  • Power and torque at peak efficiency: 555 watts (0.75 horsepower) and 1030 mNm (145 oz-in).
Check Stock

DEWALT Drill, Variable Speed Reversible, Pistol Grip, Anti-Lock Control, 1/2-Inch, 10.5-Amp (DWD220)

  • DEWALT Perform and Protect line of power drill is designed to provide a high level of control, dust containment, or low vibration without sacrificing performance.
  • E-Clutch System of Dewalt drill is a Perform and Protect control feature that shuts the tool off when a stall is detected to reduce reactionary torque in bind-up situations..
  • 10.5 Amp motor of cordless power drill delivers increased drilling performance..
  • Includes 0-1200 RPM variable speed reversing switch for increased versatility..
  • Patented DEWALT-built motor design generates 50% more power with increased overload protection for added durability.
Check Stock

AMRA-37180 AFI 1000 Waterproof Wiper Motor w/ 2.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 2.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

AMRA-36180 * AFI 1000 Waterproof Wiper Motor w/ 1.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 1.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock