DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits
The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
5050 4 Pin RGB LED Strip Connector Kit Includes RGB Extension Cable, LED Strip Jumper, 2 Way RGB Splitter Cable, L Connectors, T Connector, Gapless Connectors, 4 Pin Male Connector, LED Strip Clips
...s, 10 pieces white male to male connectors, extension cable in 3.3 feet and 6.6 feet, 1 piece of 2 way splitter, 20 pieces solderless gapless connectors, 4 pieces L-shaped connectors and 4 pieces T-shaped connectors, which can meet your DIY need.
Compatible with: the LED connector kit fits the 0.39 inches/ 10 mm SMD 5050 RGB LED strips, compatible with waterproof and non-waterproof strips.
For waterproof LED strips, please strip off the silicon on the surface around the welding area.
Enjoy the fun of light strip: with these various LED connector adapters, you can easily set up your LED light bar and customize it.
Use a solderless 4-pin connector to connect a separate light strip, or use a corner connector to connect the corner of the house and table, the wall or the ceiling, etc..
Easy to install: 5050 4 pin RGB LED light bar connector kit can be plugged and played, easy to install, no tools and soldering are required.
Widely applied: light strip connector can be applied for the connection between 2 light strips, the connection between the light strip and the controller, the connection between the light strip and the separator.
LightingWill 10pcs Pack L Shape Solderless Snap Down 2Conductor LED Strip Connector for Right Angle Corner or 90 Degree Connection of 8mm Wide 3528 2835 Single Color Flex LED Strips
2 pin connector for 8mm wide SMD3528 2835 single color LED strip (Not suitable for high intensity 120LEDs/M strips).
Working Condition: Can be able to stand up to 4A current and 0-24V voltage.
Heat resistance level from -20 ~ 100 degree C..
L shape for corner or turning connection, solderless quick snap down.
Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
Package includes: 10x 2pin 8mm SMD3528 2835 Led strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors.
Search B01DM7H5B4 for 10mm SMD5050 single color LED strips. connector.
Every module is backed by a limited lifetime warranty. We always have hundreds in stock! Every single module is fully tested by the manufacturer. Our experienced technicians can verify if these parts will work for you..
Rextin Super Bright 200pcs Mini 2835 2 LED Module DC12V Waterproof Decorative Light for Letter Sign Advertising Signs with Tape Adhesive Backside (White)
Super Bright Rextin Mini 2 LED 2835 Module Wide angle 160° ,can print your local if you have good quantity.
2 leds 2835 mini module with lens ,60-80LM Per module.
Waterproof led modules with 3M Tape adhesive backside, Peel and Stick, Easy to use.
Low power consumption, high energy efficient,180 days new replacement or money back.
Interior Car LED Strip Lights, 6 in 1 Multicolor RGB Car Neon Ambient Lighting Kits with 315 inches Fiber Optic, 16 Million Colors Sound Active Function and Wireless Bluetooth APP Control
➤ High Brightness LED Chips：High Intensity SMD 5050 LED Chips. 3 In 1 RGB Chips, Brighter Output ,Uniform Lighting. Enhances the Look and Feel of your Vehicle with Brilliant Lighting Effects..
➤ Multi-Color Fuction：This Undercar Strips Lighting Kits have 8 Preset Static Colors .4 Lighting Effects: 2 Preset Jump and 2 Preset Fading Patterns. 4 Sound Active modes, LEDs change according to sound. Pre-Applied Adhesive Tape..
➤ IP 68 Waterproof & Strong adhesive：Whole light kit Waterproof. The 5050 LED Strips are protected by the Flexible Rubber Tubing, the controller and all connectors are also made of waterproof material, well protected from Road Conditions and Debris and Rain day..
➤ Easy installation & Universal Compatibility：You can power the strip lights by the 12V cigarette adapter or by Positive/Negative wiring.The 12V voltage means it can be used by almost all of the car. Perfect for Cars, SUV, Jeep, Vans, Trucks, Boats decoration. And as a decorative light, it can also used to decorate your house, garden, party or anywhere you want..
➤ Reliable Service：With over 10 years experience on LED car lights manufacturing,Xprite provides Satisfying after-sales service. Please do not hesitate to contact us if you have any question.
Xprite Car Underglow Neon Accent Strip Lights Kit 8 Color Sound Active Function and Wireless Remote Control 4 PCs LED Underbody System Light Strips w/ 6FT Extension Wire & Cable Tie
➤ High Brightness LED Chips：High Intensity SMD 5050 LED Chips. 3 In 1 RGB Chips, Brighter Output ,Uniform Lighting. Enhances the Look and Feel of your Vehicle with Brilliant Lighting Effects..
➤ Multi-Color Fuction：This Undercar Strips Lighting Kits have 8 Preset Static Colors .4 Lighting Effects: 2 Preset Jump and 2 Preset Fading Patterns. 4 Sound Active modes, LEDs change according to sound. Pre-Applied Adhesive Tape..
➤ IP 68 Waterproof & Strong adhesive：Whole light kit Waterproof. The 5050 LED Strips are protected by the Flexible Rubber Tubing, the controller and all connectors are also made of waterproof material, well protected from Road Conditions and Debris and Rain day..
➤ Easy installation & Universal Compatibility：You can power the strip lights by the 12V cigarette adapter or by Positive/Negative wiring.The 12V voltage means it can be used by almost all of the car. Perfect for Cars, SUV, Jeep, Vans, Trucks, Boats decoration. And as a decorative light, it can also used to decorate your house, garden, party or anywhere you want..
➤ Reliable Service：With over 10 years experience on LED car lights manufacturing,Xprite provides Satisfying after-sales service. Please do not hesitate to contact us if you have any question.
LED Strip Solderless Connector Adaptor for 10mm Wide 5050 RGB Waterproof Led Strip Light 4 Pin RGB Strip Connector Pack of 10
Easy-clasp solderless connectors, only work for 10mm wide Waterproof (IP62/65 silicone or PU on the PCB surface, not for IP67, IP68 type) 5050 RGB LED....
Easy to use, no soldering required. Just clasp 10mm Waterproof RGB 5050 led strip section into the connector to get connected..
Please check the width of your LED strips, these connectors are not suitable for 8mm or other sizes of waterproof LED strip light..
Note: it is not recommended to connect the Non-waterproof led strips, because the Non-waterproof light strips are too thin and the connection is not....
Package Content: 10 pcs 4 Pin led strip lights connectors for waterproof (IP62/65) 10mm width RGB led strip..
