4Pcs MAX7219 8 Digit 7 Segment LED Tube Display Control Module for MCU/51/AVR/STM32
MAX7219 is an integrated serial input / output common-cathode display driver, which connects your microprocessor to a 7-segment digital LED display with 8 digits.This module is compatible with 5V and 3.3V microcontrollers, and you you can use it.
Material: PCB+Electronic components, LED color: Red.
Only three IO ports are used to drive the eight digit display. MAX7219 supports flicker free displays as well as cascading displays. PCV board four corners of the fixed copper stud, which can effectively precent short circuit accidents happen..
Wiring instructions (take the provided program as an example, you can pick any IO port definition can be modified in the program): VCC to 5V, GND to GND, DIN to P00, CLK to P02, CS to P01.
Digital tube is 0.36 inch 4-bit integrated cathode digital tube.
Note: VCC and GND should not be connected reversed, so as not to burn the chip.
51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines..
A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update without rewriting all displays. MAX7219 also allows the user to select each data encoding or no coding..
7 Rows of Quick Freezing Heat Dissipation Openings: Ventilation heat dissipation openings are arranged at the top of the machine, which can rapidly dissipate heat and protect the inside of the machine and prolong its service life..
Distribution of CD ROM Installation Software: Installation is more convenient, debugging is more professional, just for you who are pursuing sound quality, put the CD into DVD and install it directly.【If there’s any problem,please don’t hesitate to contact us, we are very happy to help and strive for good customer service】.
Jialan 48V Battery Fuel Gauge Indicator,for Golf Cart,EZGO, Yamaha, Fork Lifts,Club Car,Floor Care Equipment LED Battery Indicator Meter Gauge
【48V Battery Fuel Gauge】This device is only workable on lead-acid battery but not Trojian type.LED battery indicator available in 48V volt DC acid battery.
【LED Battery Indicator Meter】10 segment LED Bar Graph display,Resolution: 10% per segment:3 color LED display,different light displays different battery level visually.
LED flash for low charge&high charge warning.
【Note】The second LED from the left flashes as a warning that the batteries voltage has been discharged to 80% of their capacity.It is strongly recommended to recharge the batteries when you get to the 3rd Yellow LED, this is a safety precaution to avoid dead batteries.
【 Installation Notes】Make sure your "C" terminal is either connected to the Battery "+" or a Key switch, Meter will scan from full to empty then shuts off .Meter will stay full position while first is connected with batteries and indicate the actual battery level after 155 seconds..
【 Battery Indicator】LED battery indicator battery fuel gauge battery charge gauge for DC powered equipment such as fork lifts, golf carts, floor care equipment, and any other battery powered.
... Capacity 15 lbs / 6kg Readability 0.002 lb / 1g Pan Size 7.5 x 9.5 in / 190 x 242 mm.
Maximum Resolution (d) 1:6,000 Weighing Units kg, g, lb, oz, lb:oz Application Modes Weighing, Checkweighing Keyboard 4 mechanical switches with polycarbonate overlay Calibration Digital Digital external span calibration Display 7 Segment, 6 digital / 0.8 in high red LED dual display Display Indicators Stability, Center of Zero, Net, Battery Status Tare Range To capacity by subtraction Zero Range -10% or 10% of capacity Stabilization Time ≤0.5 second Safe Overload Capacity 150% of capacity Operating Temperature Range -10° C to 40° C / 14° F to 104° F, 10% to 90% relative humidity, non-condensing Construction Stainless Steel top and platform, ABS bottom housing.
Power 12V DC 0.84A, AC Universal adapter (100 - 220V AC / 50-60Hz) and built-in internal rechargeabgle lead acid battery included Battery operation Typically 50 hours of continuous use with 12-hour full charge Ingress Protection IPX8 Washdown Pan Size (W x L) 7.5 x 9.5 in / 190 x 242 mm Scale Dimensions (W x D x H) 10.1 x 11.3 x 4.9 in / 256 x 288 x 124mm Shipping Dimensions (W x D x H) 16.1 x 14.6 x 8.7 in / 410 x 370 x 220mm Net Weight 8.6 lb x 3.9kg Shipping Weight 10.8 lbs / 4.9kg Food Safety Approva....