Best 75w Ballasts

GRUOTVSZAK HPS 600 Watt E39 1150μmol Ultra PPF 20% to 40% PAR Increases Concentrate on RED Spectrum 90000 Lumens High Pressure Sodium Grow Light Bulb 2-Pack

  • 【HIGH YIELD】: 1150μmol/s industry high, give 10% more PPF to the grow. Yield greater. 90000 lumens superior brightness performance..
  • 【BIGGER BUDS】: At least 20%, up to 40% more PAR focus on RED to improve light utilization for photosynthesis designated for blooming bigger buds on flowering stage..
  • 【Compatibility】⚙️: Compatible with electronic and magnetic ballast, E39 base.E-Ballasts with wide range of operating voltage (ballasts output voltage) 80V~280V are recommended..
  • 【Long Life】⚡: Over 28,000 hours total life time, premium 90% output maintenance for 6000 hours efficient grow, quality guaranteed..
  • 【Warm Up Time】☀️: Allow 5 mins for full bright.
  • Wait at least 7 mins before striking again after use..
Check Stock

Halo 310 Series 6 in. White Recessed Ceiling Light Fixture Trim with Coilex Baffle, White Trim / White Baffle, 200

  • Trim designed to minimize glare and reduce ceiling brightness.
  • Phenolic coilex baffle with separate metal ring.
  • Traps and shapes light to create precise effects.
  • Coil spring retention pulls the trim tight to the ceiling and allows for easy installation.
  • Use with PAR bulbs, 65-Watt maximum (not included).
  • housings - H7ICT, H7ICAT, H7RICT, H7RICAT (45W PAR38, 50W PAR30, 65W BR30, 75W R30, 75W PAR30L).
Check Stock

Quentacy DC 0/1-10V LED Dimmer Knob Controller Rotary Mini Switch PWM Dimming for Dimmable Interior Lighting Spotlight Grow Lamp LED Driver

  • The dimmer is small and easy to install,Switch Size: 32*20*35(mm),Mounting Hole Diameter : φ7mm..
  • The connected power 0/1-10V interface must have a voltage of 10V for dimming.
  • The max load connected to the drive is 10V/40mA.
  • Minimum output connect cable size is 1007#20AWG.
  • Designed for 0-10V regulating and compatible all 0/1-10V interface dimmable electronic LED Driver & ballasts & transformers and power dimmers ..
  • Place the driver away from direct heat sources and in well-aired spaces .If the driver is built-in ,sufficient ventilation must be ensured..
  • When connecting the electronis LED Driver & ballasts & transformers and power dimmers ,careful attention should be paid to connecting "+" and "-" as the picture of Wiring Diagram .(Red line connects to "DIM+" ,Black line connects to "DIM-" ).
Check Stock

Kensun Ballasts "Various Options" - 2 "Slim" Digital Ballasts - 2 Year Warranty

  • #1 Customer Service & Quality, HID Xenon Headlight Replacement Ballasts.
  • Easy and Simple installation. Usually takes less than 20 minutes! “Plug-and-Play” in most vehicles. Some vehicles may need professional installation. The manufacturer provides free full technical support with hundreds of thousands of satisfied users. The Kensun friendly and experienced team is happy to help you with any questions or issues with the installation..
  • Includes: 100% weather-proof, shock-proof, water-proof universal high-performance slim ballasts and mounting brackets.
  • We specialize in auto parts and universal car accessories. Upgrade your oem stock halogen or LED low beam, high beam, fog light, interior lights and all off road driving lamps. Our HID xenon headlight conversion kit and replacement bulbs are available in cool neon colors including white, blue, bright yellow, purple and pink. Available in all sizes. Confirm your bulb size at Osram Sylvania or Phillips websites or with the seller of your aftermarket projector headlight housing assemblies..
  • Ultra Bright Fused-Quartz Xenon Bulb: Produces 3X brighter light than halogen, uses up to 80% less power, increases visibility, and has long lasting non-fading lifetime.
Check Stock

TOPGREENER Occupancy Vacancy PIR Motion Sensor with 0-10V Dimmer Light Switch, 800W Electronic Ballast or LED Driver, Single Pole Low-Voltage Dimmer, TDODS5-010, White

  • Motion sensor switch with low voltage 0-10 dimming, designed to control electronic ballasts or dimmable LED drivers, it allows you to dim the brightness levels of low voltage lighting.
  • Motion detection: Passive infrared (PIR) sensor reduces false triggers from unwanted movements and turns lights on when motion is detected. Lights will automatically turn off when the selected time delay expires.
  • Dimmer gradually brightens and fades lights by holding the top or bottom buttons.
  • lights turn on to last used brightness level.
  • Adjustable: Variable time delay from 15 sec (Test) to 30 min, detection range, ambient light level.
  • Specifications: For use with dimmable electronic fluorescent ballasts or dimmable LED drivers ONLY, neutral wire required, 120-277VAC, 800W max, 1200 sq ft coverage area, single-pole, wall plate not included, UL listed.
Check Stock

DZG D4S D4R Led Headlights D4S Led Headlight Bulb 35W 8400LM D4R Led Bulb 6000K White Bright Direct To Original HID Ballast CanBus Decoder Error Free, 1 Pair

  • [10 Minutes Non-Destructive Installation]---DZG Upgrade D4S D4R LED headlight bulb can be installed directly to the vehicles that with original D4S D4R hid xenon bulb, no need to take off the original ballast. NOTICE: Please make sure the function of the ballasts are working, if not, please choose DZG other type D2S/D2R/D4S/D4R LED headlight bulb(Need to take off the ballast type)..
  • [100% Decoding]---0.01S is instantly bright, no delay, see the road condition early,100% decoding. No need to make any changes to the original wires/connection, does not damage the original car AFS and auxiliary functions..
  • [High Brightness and Long Lifespan]---DZG D4S D4R LED High brightness bulb is up to 8,400lm one pair and 150% brighter than original car HID bulb. This LED bulb is with 10,000RPM cooling fan which is more effective in heat dissipation than hid bulb that without fan. 30,000 hours long life, normally it's 10 times than that of normal HID bulb..
  • [Attentions]--- 1)Please NEVER install D4S D4R led bulbs to D2S D2R ballasts, and NEVER install D2S D2R led bulbs to D4S D4R HID ballasts, it will cause HID ballast BURNT. 2)Please make sure the led kit won't block the movement of the projector or will cause an Adaptive Forward Lighting error message. 3)This kind of ....
Check Stock

Philips LED Frosted Universal Fit 4-Foot T8 Tube Glass Light Bulb EyeComfort Technology Non-Dimmable 1800 Lumen Daylight 5000K 16W=32W Medium Bi-Pin G13 Base 10-Pack

  • DAYLIGHT: Philips LED Instant Fit 4 foot T8 tube light bulbs 10-pack offer bright and comfortable Lighting with high CRI (Color Rendering Index).
  • BALLAST AND WIRING KNOWLEDGE NOT REQUIRED: Philips UniversalFit LED tubes are compatible with most electronic and magnetic ballasts, and are the....
  • COMFORTABLE LIGHT: Our products meet strict test criteria including flicker, strobe, glare and color rendition to ensure they meet EyeComfort....
  • LONG LASTING: Each light bulb is expected to deliver a lifetime of up to 36,000 hours of light (based on 3 hours per day), saving you the cost of....
  • COMPATIBILITY: These Philips LED light bulbs fit in Minatare Bi-Pin G13 bases in electronic and magnetic ballasts.
Check Stock

NYLL - Pack of 2 4 FT/ 48 Plug & Play LED Sign Lamp - Dual-Sided Daylight 6000K T12 Linear Bulb Replacement – Relamp 60W F48T12/D/HO RDC Without rewiring or Modification - Ballast Required!

  • Directly relamp and replace the 55/60 watt fluorescent bulb F48T12/HO without rewiring or modification. LED lamp is powered by the ballast, which....
  • All plastic diffuser for better light distribution, less spot reflections. O Rings to waterproof rotating caps and sealed diffuser for indoor and....
  • Energy saving of 48% from 55/60 watts to 31 watts with 3410 lumens output (S), Energy saving of 37% from 55/60 watts to 38 watts with 4180 lumens....
  • T12 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start....
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as....
Check Stock

Sunlite 41383-SU LED PLV Plug and Play Vertical Light Bulbs 9 Watts 26W Equivalent 1000 Lumens G24q Base 4 Pin Ballast Dependent CFL Replacement UL Listed 12 Count Pack of 1 40K-Cool White

  • UPGRADE TO LED - Replace your 26 watt compact fluorescent PL bulbs with energy efficient 9 watt LED plug and play bulbs from Sunlite. They feature a....
  • PLUG AND PLAY - These bulbs are direct replacements for PL fluorescent bulbs with no bypass required. For use with electronic ballasts only. See....
  • ENERGY EFFICIENT - These 9 watt LED bulbs are direct replacements for 26 watt CFL bulb. 1000 Lumen output with a color temperature of 4000K (cool....
  • LONG LIFE SPAN - Provides up to 50,000 hours of energy efficient light means you'll have to replace difficult to access bulbs less often. Makes....
  • A SAFER CHOICE - Unlike CFL bulbs these LED lamps contain no hazardous chemicals. They work with your existing ballasts so no special wiring or....
Check Stock

DZG D1S D1R Led Headlight Bulb D1S Led Bulb 35W 8400LM D1R Led Headlights Conversion Kit Plug And Play To Original HID Ballast 1 Pair

  • [10 Minutes Non-Destructive Installation]---DZG Upgrade D1S D1R LED headlight bulb can be installed directly to the vehicles that with original D1S....
  • [100% Decoding]---0.01S is instantly bright, no delay, see the road condition early,100% decoding. No need to make any changes to the original....
  • [High Brightness and Long Lifespan]---DZG D1S D1R LED High brightness bulb is up to 4200lm per bulb and 150% brighter than original car HID bulb. This....
  • [Attentions]--- 1)Please NEVER install D1S D1R led bulbs to D3S D3R ballasts, and NEVER install D3S D3R led bulbs to D1S D1R HID ballasts, it will....
  • [NOTICES & 2 Year Warranty]---The filter system is not always 100% right. Please check your owner's manual or the part number on your original bulbs....
Check Stock