Best 90 Degree Ball Fitting

Amazon Basics Lightweight Mini Tripod

  • Mini tripod with adjustable-height metal legs and rubber feet.
  • Compatible with small digital cameras (not DSLRs), GoPro devices, and smartphone adapters (not included).
  • Recommended max load weight is 1.1 lbs (0.5kg) for optimal performance.
  • Mini ball head for 360-degree rotation and 90-degree tilt.
Check Stock

Value Plastics L60-6 Natural Polypropylene Tube Fitting, Barbed 90 Degree Elbow, 1/4\ (6.4 mm) Tube ID (Pack of 25)

  • 90-degree elbow with angled barbs for connecting two tubes at an angle.
  • Polypropylene for chemical resistance and dimensional stability.
  • Longer barb extends the sealing surface of the fitting.
  • Expands inside diameter of tubing from 42 to 69 percent for increased seal strength.
Check Stock

Angled USB Cable, Spring Coiled USB to Micro-USB Extension Cord 90 Degree USB A to Micro B Male Lead

  • The USB A to Micro B cable is right angle / 90 degree on both ends for very convenient connection, 5 pin micro type B male to USB 2.0 type A male cable to connect your phone, tablet, ps4 controllers, MP3 player, camera, HDD, e-reader, external battery, controllers, printers and other micro usb B devices with your computer or adapter..
  • Coiled USB A to Micro B cable can plug into your standard Micro USB port,either way charge and transfer data just as well as any other cables. 90 Degree micro usb cable supports 2.4 Amp current,which can charge your smartphones at the full 2.4 amps..
  • The angled micro usb charger cable is light weight and coiled design for easy carrying, so the 90 degree micro B male USB cable is your good choice for work while traveling since it can be pocket. Solid and durable made angled micro usb able, the black strain reinforcement at each end does a good job protecting the connection between the cable and the jack..
  • If "NOT CHARGING" when the mciro usb cable plugged in, kindly press them in as the USB cables are brand new and with tight tolerances but loosen up over a bit of time and become smooth fitting..
  • Note: Cable Length: Approx 15cm Coiled, about 1M(3FT)when stretch..
Check Stock

VSL Fighting Equipment 15\ Mini HITSTIX

  • Adjustable Height - The height can be adjusted from 58 to 72 inches, which can be adjusted to the right height as needed to suit everyone's needs. This punching bag spinning bar is perfect for boxing training..
  • Durable Boxing Speed Ball - PU material speed ball, wear-resistant, anti-aging, comfortable feel does not hurt the hand. The connection spring reaches 90 degrees with strong rebound and can be quickly restored to its original state. (The first inflation is recommended not to fill too full.).
  • 360 degree spinning bar - Height adjustable freestanding punching bag with flexible 360-degree spinning bar that that is very smooth. Great for exercising your reflexes, hand-eye coordination, agility and accuracy. Also great for toning your arm muscles and releasing stress..
  • Stable Base - The base has 8 strong suction cups, which can firmly absorb the ground and stabilize the base without moving, while not scratching the floor, suitable for all smooth floors. At the same time, the base can be filled with water or sand to make it more stable..
  • Easy to Install - You can install this boxing training equipment with punching ball according to the instructions. If you have any problem, please feel free contract us..
Check Stock

STYDDI Pivoting Coupler Kit for Pressure Washer, Pressure Washer Tips and Quick Connect Pivot Adapter Coupler with 5 Rotation Angles, Soap and Rinse Jet Stream Tips, 1/4 inch, 2.5 GPM, 4500 PSI

  • ...or Reaching Up Under The Bottom Of Your Car And Also In The Hard-To-Reach Areas In My Cars Rims, Also Great For Gutter Cleaning..
  • UNIVERSAL ACCESSORIES COMPATIBLE WITH MOST BRANDS: Universal Pressure Washer Accessories Fit Most Leading Brands Such As Sun Joe, AR Blue, Simpson, Ivation, Greenworks And More. Each Easy Fitting Nozzle Tip Is Designed For Usage On A Different Outdoor Surface..
  • SUPPORT UP TO 4500 PSI POWER WASHER: 1/4” Quick Connection Design, 2.5 GPM, Up To 4500 PSI. Meet Your Needs In Different Situations, Such As Watering Flowers And Plants, Washing Car, And So On. It Makes Washing Your Car, Sidewalk, Garden And More A Cinch!.
  • EASILY CLEAN HARD-TO-REACH AREAS: 7 Tips Allow Wide Range Of Spray Patterns And Applications. You Can Choose Different Angles Spray Nozzle According To The Actual Needs. Easy To Connect And Remove. It Allows You To Clean Hard-To-Reach Areas Quickly And Easily Without A Ladder..
Check Stock

iPad Tripod Mount Adapter with 360 Degree Rotatable Ball Head for iPad, iPad Air, iPad Mini, Kindle Fire, Samsung Galaxy Tab, Microsoft Surface, Universal Tablet Clamp Holder for Tripod Monopod Etc

  • ✅Upgrade Version - Tripod Ball Head is Added: Metal joint ball pivot ensures 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography. No worry about clamping the tablet only in portrait position. Our iPad mount with the adjustable ball head allows your iPad to set horizontally and vertically, which virtually means any adjustment - up, down, left, right. Really convenient for you to shoot at different angle.
  • ✅Standard 1/4" Screw Mount: Suitable for any device with 1/4" screw, such as tripod, monopod, selfie stick, light stand etc. Satisfy your needs for portable and home use. [Easy to Use]: Locke&Unlock knob design allows you to use easily! Just adjust the mount's width in unlocked mode and lock after iPad is clamped. Ideal for any occasions like photo shot, live video streaming, video call, online meetings etc. Even used for wedding ceremony!.
  • ✅Unbelievable Stable & Anti-Scratch: Made from heavy duty ABS material. Structural stiffness, sturdy spine and metal ball joint pivot make sure your tablet be held in place very firmly. Plus, the knob at the back center is used for clamping the tablet more ....
Check Stock

Brennan N2501-04-02-SS Stainless Steel Compression Tube Fitting, 90 Degree Elbow, 1/4\ Tube OD x 1/8\ NPT Male

  • 90-degree elbow for connecting two pipes or fittings at an angle.
  • Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other.
  • Made of stainless steel for resistance to scaling and corrosion.
  • Double ferrule fitting reduces possibility of leakage.
  • Meets ISO 9001:2008 quality assurance standards.
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock

1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)

  • 3/4 INCH PIPE ELBOW – TEN PACK: Our Brooklyn Pipe cast iron fittings 10 pack elbow pipes are made with from superior steel with 100% durability and strength and provides you with great flange elbow fittings at a very affordable price..
  • PERFECT FOR DIY: Whether you’re looking to build a pipe shelf, pipe towel rack, pipe lamp, our malleable 90 degree elbow industrial fitting is up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water..
  • RAW IRON: Our 3/4 inch black malleable iron pipe fittings are raw and unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron, it’s normal for your hands to get dirty. You’ve probably seen iron workers in movies, they don’t come home clean!.
  • ONE CONVENIENT PACK: Our 3/4 90 degree elbow threaded flanges fittings pipes give you 100% super convenient benefits than other bands because our Brooklyn Pipe elbow is designed to be compatible with your all project parts.
  • UNLEASH YOUR CREATIVITY: We inspect and pack each pipe fitting and we offer a LIFETIME warranty on our products, just give us a call or send an e-mail. Now, with our black pipes bring the rustic, industrial style into your home, office or any inte....
Check Stock

Lippert Components 113128 1/4\ Hydraulic Fitting - 90° Elbow (6801-04-04)

  • COMPATIBILITY — Designed to replace the 90-degree elbow fitting on your Level Up Hydraulic Leveling Systems — including Level Up Towable, Level Up Motorized and Lippert Motorized Hydraulic Leveling Systems.
  • EASY INSTALLATION — This is an exact replacement component — helping to streamline the installation process on your 5th wheel RV or travel trailer.
  • DESIGNED FOR YOUR RV — Our replacement fitting includes JIC-M to ORB-M adjustable ports and is 1/4" in diameter.
  • REPLACEMENT PART — At Lippert, we help you take the guesswork out of replacement parts with exact-match components designed to get your RV’s equipment up and running as usual.
  • IMPORTANT INFORMATION — Please reference your owner’s manual for detailed product installation and safety information before installation.
Check Stock