Best 90 Degree End Mill

HHIP 1015-0748 Double End Boring Bar, 3/4\ Bar Diameter x 8\ Overall Length x 1/4\ Bit Size

  • Broached holes accept high speed steel and carbide tool bits.
  • Machined from selected steel for greater strength and rigidity.
  • Bars have one 45 degree end and one 90 degree end.
Check Stock

90° Chamfer End Mill 2 Flute Tungsten Steel Cemented Carbide Precise for Machine Tools(1075L)

  • Suitable for machine tools, milling machines..
  • This is 90 degrees 2 flutes chamfer end mill, precise and durable.
  • It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..
  • Made of tungsten steel cemented carbide material, high hardness and long service life.
Check Stock

Legris 3199 06 10 Nylon & Nickel-Plated Brass Push-to-Connect Fitting 90 Degree Elbow 6 mm Tube OD x 1/8 BSPP Male

  • 90-degree male elbow to connect a tube to a female threaded connection at a 90-degree angle.
  • Push-to-connect metric tube connection on one end and male BSPP threads on the other end.
  • Nylon body and nickel-plated brass sub-base.
  • Handles pressures up to 290 psi (20 bar), an operating temperature range of -20 to +80 degrees C (-4 to +176 degrees F), and a vacuum capability of 755 mm Hg.
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

HHIP 1015-1001 Double End Boring Bar, 1 x Bar Diameter x 12\ Overall Length x 1/4\ Bit Size

  • Broached holes accept high speed steel and carbide tool bits.
  • Machined from selected steel for greater strength and rigidity.
  • Bars have one 45 degree end and one 90 degree end.
Check Stock

Estwing 42-Inch Wrecking, Demolition Bar and Pry Tool (42502)

  • MULTI-PURPOSE DESIGN - Design incorporates multiple features ideal for demolition work of all kinds.
  • SOLID STEEL - Forged from hardened alloy steel for lasting strength and durability.
  • 4-FOOT LENGTH - 42-inch length for premium leverage and maximum torque.
  • 90-DEGREE HEAD - One end of tool features a 90-degree angled head perfect for lifting and prying.
  • BEVELED ENDS - Both ends of the tool are beveled to easily work into tight areas for better leverage.
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

Accusize Industrial Tools Cat40 1'' End Mill Holder with 3'' Indexable Face Milling Cutter, 7104-2508

  • CAT40 1'' Diameter Caterpillar V-Flange Shell End Mill Holder, #6780-7104.
  • All ''V'' Flange Tooling is interchangeable with brown & sharp, Burgmaster, Carboloy, Cincinnati Milacron, De Vlieg, Erickson, Excello, Moog, Pratt & Whitney, Universal, Valenite, White Sund Strand and other machining centers.
  • 3'' Indexable Face Milling Cutter 90°, Positive Rake with TPG322, #2508-0018.
Check Stock

uxcell a11103100ux0074 5/16\ x 5/16\ Straight Shank 4 Flute Endmill Milling Cutter

  • Package Content : 1 x Straight Shank End Mill.
Check Stock