Best 90 degree Angle Ruler

Miter Saw Protractor Angle Finder, 360 Degree Rotation Function, 7.3 inch Construction Protractors for Woodworking and All Building Trades

  • Large LCD Display: This Digital protractor is equipped with a large LCD display for easy reading.
  • Lock and Reverse angle functions: You can hold and keep the reading by pressing the HOLD function button, it also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement, The display could read up-side-down. Easy to read, laser engraving scale, clear and accurate..
  • Stainless Steel Body: Durable stainless steel body can be used for a long time.
  • use a CR2032 button battery to work for more than 2000 hours (CR2032 Battery included)..
  • Zeroing at Any Angle: Zero-adjust at any angle under the relative measurement angle of a button.
  • the locking screw is used to maintain the measured reading at any time.
  • it will be automatically shut off after 6 minutes of inactivity..
  • Quick and Accurate Reading: The combination of digital stainless steel ruler and angle finder can make accurate measurement.
  • the hinge mechanism on the angle ruler allows a complete 360 degree measurement of internal and reverse angles..
Check Stock

2 Pieces Inches System Hot Hem Ruler Ironing Measuring High Temperature Resistance Ruler Patchwork Control Ruler for Patchwork Sewing DIY Craft Supplies Clothing Making Measuring Handmade Tool

  • ...ounded corner design is convenient for you to measure special parts.
  • The right-angle design can measure the horizontal and vertical dimensions of the fabric for you.
  • Durable to use: our hot ironing rulers are made of heat-resistant materials and are very durable.
  • The heat-resistant temperature is generally below 220 degrees, and the extreme high temperature can withstand 280 degrees in a short time, so don't worry about the hot steam of the iron, you can use a dry iron or steam iron to press directly on it, which can serve you for long time.
  • Easy to use: the hot ruler is easy to operate, just fold the fabric, align it at the desired angle, and press it with an iron to sew the hem immediately.
  • This ruler has a non-slip surface, which can fix the cloth in place to prevent it from moving anywhere.
  • Practical sewing accessories: put the ruler in the middle of the fabric, fold the fabric, you can clearly see the size of the ironed part.
  • It is suitable for various kinds of sewing and hemming tasks, because you can use it with a dry iron or steam iron to make your sewing work convenient and efficient.
Check Stock

OwnMy 45 Degree Aluminum Alloy Angle Ruler, Imperial Metric Scale Rafter Layout Carpenter Square Triangle Ruler Angle Measurement Tool for Woodworking Carpenter Workshop Square Measuring Gauging Tool

  • Made of sturdy aluminum alloy after oxidation treatment, this woodworking triangle ruler is durable, resistant to distortion, practical, anti-rust and corrosion resistant..
  • Laser engraved imperial and metric scales on the front and side of this angle ruler are clear and precise, making it convenient and easy to read value or make marks while using..
  • Overall dimension is 2.67” x 2.67” x 3.74”, lightweight and portable, easy to carry or store.
  • square with 0.6” thickness allows it to stand up by itself, using for measuring the length, height and thickness..
  • The large center hole design would fit for your finger to hold or fasten this ruler on workpieces, easy and comfortable to place, handle or move around and won't damage fragile cutting edges..
  • This 45 degree aluminum alloy angle ruler is designed to clamp boxes, photo frames, etc, to assist with square making process.
  • an essential tool for woodworking lovers, home builders, carpenters, engineers, and hobbyists..
Check Stock

Cocew Miter Saw Protractor, Aluminum Angle Finder with Precision Laser Engraved Scales for Carpenters, Crown Molding Tool, Plumbers, Building Trades and DIY Home Improvement, with Waist PU Pouch

  • Made of sturdy aluminum alloy after oxidation treatment, this woodworking triangle ruler is durable, resistant to distortion, practical, anti-rust and corrosion resistant..
  • Laser engraved imperial and metric scales on the front and side of this angle ruler are clear and precise, making it convenient and easy to read value or make marks while using..
  • Overall dimension is 2.67” x 2.67” x 3.74”, lightweight and portable, easy to carry or store.
  • square with 0.6” thickness allows it to stand up by itself, using for measuring the length, height and thickness..
  • The large center hole design would fit for your finger to hold or fasten this ruler on workpieces, easy and comfortable to place, handle or move around and won't damage fragile cutting edges..
  • This 45 degree aluminum alloy angle ruler is designed to clamp boxes, photo frames, etc, to assist with square making process.
  • an essential tool for woodworking lovers, home builders, carpenters, engineers, and hobbyists..
Check Stock

Digital Angle Finder Protractor, Preciva Digital Protractor 7 inch / 400mm Stainless Steel Measuring Ruler with Large LCD Display for Woodworking, Measurement, Construction Angle Measuring Tool

  • 【Large LCD Display & High Precision】 Preciva digital protractor is equipped with a large LCD display for easy reading.
  • 【Locking Function】Convenient locking screw-by pressing the screw, the ruler can be kept at any angle.For maintain its accuracy and read it easily, Preciva angle finder could be locked at any angle..
  • 【2 in 1 Digital Protractor】Digital stainless steel ruler and angle finder combo makes precise measurements.the hinge mechanism on the angle rule allows complete 360-degree measurement of internal and reverse angles.
  • The protractor combines standard and metric scale scales.Relative and absolute angle measurement..
  • 【Durable Rulers & Low Power Consumption】The digital protractor angle gauge & angle finder durable stainless steel body can be used for a long time.
  • HOLD and RESET function, laser engraving scale, clear and accurate, will not fall off.In addition, it also has the advantage of energy saving, it will automatically close after 6 minutes of inactivity..
  • 【Battery Included】Large capacity standby with automatic power-off function ,use a CR2032 button battery to work for more than 2000 hours .Saving power consumption and extending battery life..
Check Stock

SLIIMU 30 45 90 Degree Angle 4 Sizes Drill Hole Guide Jig for Angled and Straight Hole, Portable Deck Cable Railing Lag Screw Drilling Template Block For Horizontal Cable Wood Post,Stair Wire Handrail

  • ...ellent finish, corrosion resistance and durability. The guide holes of this drill guide are inlaid with steel drill sleeves, so there is no need to worry about it being worn during drilling, causing the guide holes to become larger and lose accuracy..
  • THREE DRILLING ANGLES: The drill guide has a drilling angle of 30 degrees, 45 degrees and 90 degrees. Suitable for 90 Degree horizontal deck post and 45&30 degree angled stairs railing, the angle is fixed without deviation, you can quickly drill accurate 30/45/90 degree angle holes with a handheld drill on the deck post, saving your working time..
  • FOUR SIZES OF GUIDE HOLES: There are four sizes of guide holes for each drilling angle, which are 3/8”(9.52mm), 5/16”(7.93mm), 1/4”(6.35) mm), 3/16″(4.76mm), compatible with most cable railing lag screws. In order to drill the angle hole more accurately, please use a drill of the corresponding size..
  • SCOPE OF APPLICATION: This drill guide can be used in conjunction with Locking C-Clamp and F clamp to prevent the drill guide from shaking when drilling, and the drilled holes are free of burrs and cracked. It is suitable for the installation of wooden, aluminum, and stainless steel deck posts for cable railings and DIY woodworking projects..
Check Stock

Speedjaw Portable Clamping Project Workbench/Workstation for Metal and Woodworking, Adjustable Height and Tiltable Platform, Worktop Measures 11X23 Inches, Folds for Storage

  • Adjustable - platform's height ranges from 28.5-inches to 40-inches and tilts up to 90 degrees.
  • Versatile - rotary clamping handles can be adjusted independently for maximum angle control.
  • Spacious - work surface measures 11-5/8-inches by 23-5/8-inches and features ruler and protractor.
  • Wide jaw design - clamp jaws can open to 9-inches and feature retractable material supports.
  • Easy storage - when not in use the worktable can be folded down for easy storage and portability.
Check Stock

Tarantula Tools Multi Angle Measuring Ruler - Angle Template Tool - Black Aluminum Adjustable Angle Ruler - Angle Tool - All Metal No Plastic - Easily Set The Right Measurement Izer Angles

  • Tarantula Tools Multi Angle Template Tool Ruler.
  • Our universal angle ruler izer is built the right way with the highest quality aluminum and....
  • You will receive a Tarantula Storage Bag, Digital Download of our Instruction Guide. This all comes along with your angle ruler template....
  • Whether the application is small, or large, this universal angle ruler izer is easily adjustable to achieve the correct angle....
  • There is no plastic on this angle template tool. The ruler will not crack or break and the set screws will not strip out while measuring....
  • Our angling ruler is backed by our 1 year Tarantula no questions asked warranty, along with our LIFETIME....
Check Stock

Creative Grids 90 Degree Double-Strip Quilt Ruler - CGRDBS90

  • Use the straight side of this double strip ruler to cut 1-1/2 and 2-1/2 inch strips – or use the pre-cuts that are on the market. Sew these strips together to create a 4-1/2 inch wide strip set..
  • Turn-a-Round the ruler to cut three 90 degree triangles that finish 4 inches. Multiple layers can be cut at one time..
  • Slides easily over fabric until pressure is applied.
  • gripper holds fabric in place while cutting, eliminating miss-cuts.
  • Comes with fully illustrated step by step instructions or Scan the QR Code printed on the ruler to view a video demonstration.
Check Stock

Generic Square Stainless Steel Measure Ruler Engineer Carpenter Woodwork Tool

  • Size: Approx. 150 x 300mm/ 5.9 x 11.81inch.
  • Used mainly in woodworking,Leather Craft to lay out cutting lines at 90-degree angles..
  • The scale is clear and easy to read, scales are etched onto the both sides of the blade for long life..
  • Stainless Steel Square Ruler Measure Ruler Precision Engineer Carpenter Woodwork Tools.
Check Stock